[Sun May 27 10:09:59 2012] Detection parameters:
  Position = (336.0, 315.0) = 18 41 12.75 -4 56 21.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 596.4 +/- 31.2
  Background counts = 20.8
  Rate = 0.1 +/- 0.005

[Sun May 27 10:10:00 2012] Off-axis axis estimate = 2.98'
[Sun May 27 11:54:49 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Sun May 27 11:54:49 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Sun May 27 11:54:49 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.743
[Sun May 27 11:54:49 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.92"
[Sun May 27 13:14:44 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_src3.ximg exists
[Sun May 27 13:14:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_src3.csv
[Sun May 27 13:14:44 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun May 27 13:14:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_src3.csv
[Sun May 27 13:14:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 13:14:45 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun May 27 13:14:45 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun May 27 13:14:45 2012] Fit fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun May 27 15:16:17 2012] Spatial fit model total counts = 2310.340000, observed total counts = 2308.000000
[Sun May 27 15:16:17 2012] Offset between fit and detection position for source 3 = 1.717615 pixels
[Sun May 27 15:16:17 2012] 2061.798000 total counts/ 1336.560000 bgd. counts: snr = 19.837472
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.717615 pixels
  Position = (335.5, 313.4) = 18 41 12.89 -4 56 28.4
  Extent = 15.8 (13.5-31.7)", rotation angle = 0
  Source counts = 725.2 +/- 45.4
  Background counts = 1336.6
  Rate = 0.1 +/- 0.007
[Sun May 27 15:16:17 2012] Spatial fit model total counts = 2153.900000, observed total counts = 2159.000000
[Sun May 27 15:16:17 2012] Offset between fit and detection position for source 3 = 0.242456 pixels
[Sun May 27 15:16:17 2012] Warning, changing simple spatial fit ID from 3 to 6
[Sun May 27 15:16:17 2012] 1930.829000 total counts/ 1382.410000 bgd. counts: snr = 14.750069
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.242456 pixels
  Position = (335.3, 313.2) = 18 41 12.94 -4 56 29.3
  Extent = 13.6 (10.8-15.7)", rotation angle = 0
  Source counts = 548.4 +/- 43.9
  Background counts = 1382.4
  Rate = 0.09 +/- 0.007
[Sun May 27 15:16:17 2012] Vigneting correction estimate = 1.000000
[Sun May 27 15:16:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 15:16:17 2012] Assessing source extent using major axis lower bound
[Sun May 27 15:16:17 2012] Source does appear to be extended
[Sun May 27 15:16:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 15:16:17 2012] Source is confused with source 6
[Sun May 27 15:16:17 2012] Source is confused with source 5
[Sun May 27 16:15:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 16:15:12 2012] Initial guess for spatial extent in simple fitting = 13.64"
[Sun May 27 16:15:12 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.927
[Sun May 27 16:15:12 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 13.64"
[Sun May 27 17:53:42 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass1_src3.ximg exists
[Sun May 27 17:53:42 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun May 27 17:53:42 2012] Fit fullrun_mos1_xmm0013340201_pi300-10000_cl_pass1_src3 appears to have run properly
[Sun May 27 17:53:42 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun May 27 17:53:42 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun May 27 17:53:42 2012] Fit fullrun_mos1_xmm0013340201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun May 27 19:36:35 2012] Warning, spatial fit 3 centroid is now closest to src. 7
[Sun May 27 19:36:35 2012] Vigneting correction estimate = 1.000000
[Sun May 27 19:36:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 19:36:35 2012] Assessing source extent using major axis lower bound
[Sun May 27 19:36:35 2012] Source does appear to be extended
[Sun May 27 19:36:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 02:07:56 2012] XMMSAS src. selection expression = ellipse(29126.688800, 27198.273200, 818.328024, 818.328024, 0.000000, X, Y)
[Mon May 28 02:07:56 2012] Writing source region out to fullrun_mos1_xmm0013340201_pi300-10000_pass1_cl_src3_src.reg
[Mon May 28 02:07:56 2012] Extracting stamp from image fullrun_mos1_xmm0013340201_pi300-10000_cl_sm2.00.img.gz, (288, 266) - (382, 360)
[Mon May 28 02:07:56 2012] XMMSAS bgd. selection expression = annulus(29126.688800, 27198.273200, 1363.880039, 2727.760078, X, Y) && !ellipse(27225.322800, 27530.000800, 449.304813, 449.304813, 0.000000, X, Y) && !ellipse(27244.624000, 26130.652440, 2320.464067, 2320.464067, 0.000000, X, Y) && !ellipse(27024.098000, 27321.276000, 824.320024, 824.320024, 0.000000, X, Y) && !ellipse(29187.798000, 26870.104000, 1226.592035, 1226.592035, 0.000000, X, Y) && !ellipse(28562.711670, 27262.819946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28424.071350, 28036.569824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28103.892000, 25947.664000, 1200.728035, 1200.728035, 0.000000, X, Y) && !ellipse(27181.922400, 25366.380900, 1172.584034, 1172.584034, 0.000000, X, Y) && !ellipse(26336.182200, 28393.898000, 1231.208035, 1231.208035, 0.000000, X, Y) && !ellipse(25602.502000, 26029.558000, 1319.864038, 303.367209, 220.695000, X, Y) && !ellipse(28222.324000, 28535.598000, 1253.224036, 1253.224036, 0.000000, X, Y) && !ellipse(26150.269745, 25711.109314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29039.600000, 28430.320000, 1332.360038, 1332.360038, 0.000000, X, Y) && !ellipse(27209.418000, 29849.160000, 1272.720037, 1272.720037, 0.000000, X, Y) && !ellipse(29277.527863, 28991.445801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27779.217834, 29439.590851, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 02:07:56 2012] Writing fullrun_mos1_xmm0013340201_pi300-10000_pass1_cl_src3.gif
[Mon May 28 02:08:29 2012] Mean detx,y = (180.21, 1598.61) 
[Mon May 28 02:08:30 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 02:08:37 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 02:08:37 2012] Setting source spectrum file to fullrun_mos1_xmm0013340201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon May 28 02:08:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0013340201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon May 28 04:07:23 2012] Updating aperture counts using extracted products
[Mon May 28 04:07:23 2012] Error reading totcts from fullrun_mos1_xmm0013340201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon May 28 04:07:23 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 04:07:23 2012] Using photon index=1.80, rate=0.0862, arf fullrun_mos1_xmm0013340201_pi300-10000_pass1_cl_src3.arf
[Mon May 28 04:07:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 04:07:23 2012] Updating source flux to 8.3e-13
[Mon May 28 04:07:25 2012] Flag c found in src. 3 procflags, skipping spectral fitting