[Sun May 27 10:09:59 2012] Detection parameters:
  Position = (301.1, 296.1) = 18 41 22.89 -4 57 42.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 200.7 +/- 19.8
  Background counts = 14.2
  Rate = 0.03 +/- 0.003

[Sun May 27 10:10:00 2012] Off-axis axis estimate = 0.26'
[Sun May 27 11:54:49 2012] Using EEF radius (= 6.56 ")to estimate initial spatial extent for simple fitting
[Sun May 27 11:54:49 2012] Initial guess for spatial extent in simple fitting = 6.56"
[Sun May 27 11:54:49 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.992
[Sun May 27 11:54:49 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 6.56"
[Sun May 27 13:14:44 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_src16.ximg exists
[Sun May 27 13:14:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_src16.csv
[Sun May 27 13:14:44 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_src16_1.ximg exists
[Sun May 27 13:14:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_src16.csv
[Sun May 27 13:14:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 13:14:45 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sun May 27 13:14:45 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sun May 27 13:14:45 2012] Fit fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Sun May 27 15:16:17 2012] Warning, spatial fit 16 centroid is now closest to src. 16
[Sun May 27 15:16:17 2012] Vigneting correction estimate = 1.000000
[Sun May 27 15:16:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 15:16:17 2012] Assessing source extent using major
[Sun May 27 15:16:17 2012] Source does appear to be extended
[Sun May 27 15:16:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 15:16:17 2012] Source is confused with source 16
[Sun May 27 16:15:12 2012] Using EEF radius (= 6.56 ")to estimate initial spatial extent for simple fitting
[Sun May 27 16:15:12 2012] Initial guess for spatial extent in simple fitting = 6.56"
[Sun May 27 16:15:12 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.992
[Sun May 27 16:15:12 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 6.56"
[Sun May 27 17:53:42 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass1_src15.ximg exists
[Sun May 27 17:53:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0013340201_pi300-10000_cl_pass1_src15.csv
[Sun May 27 17:53:42 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun May 27 17:53:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0013340201_pi300-10000_cl_pass1_src15.csv
[Sun May 27 17:53:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0013340201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0013340201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 17:53:42 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun May 27 17:53:42 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun May 27 17:53:42 2012] Fit fullrun_mos1_xmm0013340201_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sun May 27 19:36:35 2012] Source 17 is offset by -5.402371 and -8.008261 pixels which is larger than
2 X fitted extent = 1.508897 x 1.508897, not incorporating fit results
[Sun May 27 19:36:35 2012] Warning, spatial fit 15 centroid is now closest to src. 16
[Sun May 27 19:36:35 2012] Vigneting correction estimate = 1.000000
[Sun May 27 19:36:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 19:36:35 2012] Assessing source extent using major
[Sun May 27 19:36:35 2012] Source does appear to be extended
[Sun May 27 19:36:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 02:07:56 2012] XMMSAS src. selection expression = ellipse(26150.269745, 25711.109314, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 28 02:07:56 2012] Writing source region out to fullrun_mos1_xmm0013340201_pi300-10000_pass1_cl_src17_src.reg
[Mon May 28 02:07:56 2012] Extracting stamp from image fullrun_mos1_xmm0013340201_pi300-10000_cl_sm2.00.img.gz, (264, 259) - (339, 334)
[Mon May 28 02:07:56 2012] XMMSAS bgd. selection expression = annulus(26150.269745, 25711.109314, 1087.500000, 2175.000000, X, Y) && !ellipse(27225.322800, 27530.000800, 449.304813, 449.304813, 0.000000, X, Y) && !ellipse(27244.624000, 26130.652440, 2320.464067, 2320.464067, 0.000000, X, Y) && !ellipse(29126.688800, 27198.273200, 1091.104031, 1091.104031, 0.000000, X, Y) && !ellipse(27024.098000, 27321.276000, 824.320024, 824.320024, 0.000000, X, Y) && !ellipse(29187.798000, 26870.104000, 1226.592035, 1226.592035, 0.000000, X, Y) && !ellipse(25856.792000, 27628.644000, 538.777616, 538.777616, 0.000000, X, Y) && !ellipse(28562.711670, 27262.819946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28424.071350, 28036.569824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28103.892000, 25947.664000, 1200.728035, 1200.728035, 0.000000, X, Y) && !ellipse(27181.922400, 25366.380900, 1172.584034, 1172.584034, 0.000000, X, Y) && !ellipse(26336.182200, 28393.898000, 1231.208035, 1231.208035, 0.000000, X, Y) && !ellipse(25602.502000, 26029.558000, 1319.864038, 303.367209, 220.695000, X, Y) && !ellipse(28222.324000, 28535.598000, 1253.224036, 1253.224036, 0.000000, X, Y) && !ellipse(25409.253400, 26253.168000, 931.944027, 931.944027, 0.000000, X, Y) && !ellipse(29039.600000, 28430.320000, 1332.360038, 1332.360038, 0.000000, X, Y)
[Mon May 28 02:07:56 2012] Writing fullrun_mos1_xmm0013340201_pi300-10000_pass1_cl_src17.gif
[Mon May 28 02:10:02 2012] Mean detx,y = (-1544.93, -1095.73) 
[Mon May 28 02:10:03 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 02:10:08 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 02:10:08 2012] Setting source spectrum file to fullrun_mos1_xmm0013340201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon May 28 02:10:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0013340201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Mon May 28 03:06:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 28 03:06:56 2012] rmf not generated due to insufficient counts
[Mon May 28 04:07:23 2012] Updating aperture counts using extracted products
[Mon May 28 04:07:23 2012] Error reading totcts from fullrun_mos1_xmm0013340201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon May 28 04:07:23 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 04:07:23 2012] Using photon index=1.80, rate=0.0337, arf fullrun_mos1_xmm0013340201_pi300-10000_pass1_cl_src17.arf
[Mon May 28 04:07:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 04:07:23 2012] Updating source flux to 3.5e-13
[Mon May 28 04:07:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting