[Sun May 27 10:09:59 2012] Detection parameters:
  Position = (291.2, 322.9) = 18 41 25.78 -4 55 46.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 280.5 +/- 22.8
  Background counts = 16.2
  Rate = 0.05 +/- 0.004

[Sun May 27 10:10:00 2012] Off-axis axis estimate = 1.85'
[Sun May 27 11:54:49 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Sun May 27 11:54:49 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Sun May 27 11:54:49 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.834
[Sun May 27 11:54:49 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.35"
[Sun May 27 13:14:44 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_src11.ximg exists
[Sun May 27 13:14:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_src11.csv
[Sun May 27 13:14:44 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun May 27 13:14:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_src11.csv
[Sun May 27 13:14:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 13:14:45 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun May 27 13:14:45 2012] fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun May 27 13:14:45 2012] Fit fullrun_mos1_xmm0013340201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun May 27 15:16:17 2012] Spatial fit model total counts = 2048.520000, observed total counts = 2049.000000
[Sun May 27 15:16:17 2012] Offset between fit and detection position for source 10 = 0.914435 pixels
[Sun May 27 15:16:17 2012] Warning, changing simple spatial fit ID from 11 to 7
[Sun May 27 15:16:17 2012] 2120.041200 total counts/ 2056.370000 bgd. counts: snr = 1.404082
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.914435 pixels
  Position = (290.4, 322.4) = 18 41 26.01 -4 55 49.0
  Extent = 7.8 (3.3-14.0)", rotation angle = 0
  Source counts = 63.7 +/- 46.0
  Background counts = 2056.4
  Rate = 0.01 +/- 0.007
  Deleting source due to low Poisson probability