[Thu May 24 09:17:06 2012] Detection parameters:
  Position = (312.9, 293.0) = 18 41 19.40 -4 57 58.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 296.0 +/- 23.4
  Background counts = 18.7
  Rate = 0.08 +/- 0.006

[Thu May 24 09:17:06 2012] Off-axis axis estimate = 1.12'
[Thu May 24 09:18:41 2012] Using EEF radius (= 6.99 ")to estimate initial spatial extent for simple fitting
[Thu May 24 09:18:41 2012] Initial guess for spatial extent in simple fitting = 6.99"
[Thu May 24 09:18:41 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.902
[Thu May 24 09:18:41 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 6.99"
[Thu May 24 11:06:27 2012] fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_src9.ximg exists
[Thu May 24 11:06:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_src9.csv
[Thu May 24 11:06:27 2012] fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu May 24 11:06:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_src9.csv
[Thu May 24 11:06:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 11:06:28 2012] fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu May 24 11:06:28 2012] fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu May 24 11:06:28 2012] Fit fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Thu May 24 15:49:26 2012] Source 9 is offset by 2.120408 and -7.409708 pixels which is larger than
2 X fitted extent = 2.659338 x 2.659338, not incorporating fit results
[Thu May 24 15:49:26 2012] Source 9 is offset by 2.301826 and -7.223685 pixels which is larger than
2 X fitted extent = 2.731623 x 2.731623, not incorporating fit results
[Thu May 24 15:49:26 2012] Vigneting correction estimate = 1.000000
[Thu May 24 15:49:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 15:49:26 2012] Assessing source extent using major
[Thu May 24 15:49:26 2012] Source does appear to be extended
[Thu May 24 15:49:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 15:49:26 2012] Source is confused with source 17
[Thu May 24 15:49:46 2012] Using EEF radius (= 6.99 ")to estimate initial spatial extent for simple fitting
[Thu May 24 15:49:46 2012] Initial guess for spatial extent in simple fitting = 6.99"
[Thu May 24 15:49:46 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.902
[Thu May 24 15:49:46 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 6.99"
[Thu May 24 17:26:07 2012] fullrun_pn_xmm0013340101_pi300-10000_cl_pass1_src9.ximg exists
[Thu May 24 17:26:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013340101_pi300-10000_cl_pass1_src9.csv
[Thu May 24 17:26:07 2012] fullrun_pn_xmm0013340101_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu May 24 17:26:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013340101_pi300-10000_cl_pass1_src9.csv
[Thu May 24 17:26:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0013340101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0013340101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 17:26:08 2012] fullrun_pn_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu May 24 17:26:08 2012] fullrun_pn_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu May 24 17:26:08 2012] Fit fullrun_pn_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu May 24 21:02:18 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 10.654545 pixels away
[Thu May 24 21:02:18 2012] Source 9 is offset by 2.129939 and -7.409708 pixels which is larger than
2 X fitted extent = 2.564704 x 2.564704, not incorporating fit results
[Thu May 24 21:02:18 2012] Vigneting correction estimate = 1.000000
[Thu May 24 21:02:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 21:02:18 2012] Assessing source extent using major
[Thu May 24 21:02:18 2012] Source does appear to be extended
[Thu May 24 21:02:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 21:02:36 2012] XMMSAS src. selection expression = ellipse(27170.886902, 25443.843445, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 24 21:02:36 2012] Writing source region out to fullrun_pn_xmm0013340101_pi300-10000_pass1_cl_src9_src.reg
[Thu May 24 21:02:36 2012] Extracting stamp from image fullrun_pn_xmm0013340101_pi300-10000_cl_sm2.00.img.gz, (275, 256) - (350, 331)
[Thu May 24 21:02:36 2012] XMMSAS bgd. selection expression = annulus(27170.886902, 25443.843445, 1087.500000, 2175.000000, X, Y) && !ellipse(29051.086513, 27220.357013, 1223.232035, 345.962767, 91.671737, X, Y) && !ellipse(26892.206000, 26292.790000, 911.944026, 911.944026, 0.000000, X, Y) && !ellipse(27885.824000, 26190.242000, 1206.568035, 1206.568035, 0.000000, X, Y) && !ellipse(27182.197704, 27576.920400, 470.846414, 470.846414, 0.000000, X, Y) && !ellipse(28500.642395, 27835.931915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28501.847778, 27270.633698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26487.670868, 26746.092834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28502.522156, 26575.977142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25950.904800, 27466.688000, 747.327222, 747.327222, 0.000000, X, Y) && !ellipse(25780.344513, 26832.683960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25393.883759, 26831.268829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25484.430878, 26138.311493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26683.934800, 25403.683600, 1282.480037, 620.060018, 14.947000, X, Y)
[Thu May 24 21:02:36 2012] Writing fullrun_pn_xmm0013340101_pi300-10000_pass1_cl_src9.gif
[Thu May 24 21:07:22 2012] Mean detx,y = (199.10, 1756.27) 
[Thu May 24 21:07:24 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 21:07:36 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 21:07:36 2012] Setting source spectrum file to fullrun_pn_xmm0013340101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu May 24 21:07:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0013340101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu May 24 21:34:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 24 21:34:46 2012] rmf not generated due to insufficient counts
[Thu May 24 23:45:47 2012] Updating aperture counts using extracted products
[Thu May 24 23:45:47 2012] Error reading totcts from fullrun_pn_xmm0013340101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu May 24 23:45:48 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 23:45:48 2012] Using photon index=1.80, rate=0.0805, arf fullrun_pn_xmm0013340101_pi300-10000_pass1_cl_src9.arf
[Thu May 24 23:45:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 23:45:48 2012] Updating source flux to 2.1e-13
[Thu May 24 23:49:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting