[Thu May 24 09:17:06 2012] Detection parameters:
  Position = (313.1, 317.8) = 18 41 19.32 -4 56 10.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9982.6 +/- 118.6
  Background counts = 23.8
  Rate = 3 +/- 0.03

[Thu May 24 09:17:06 2012] Off-axis axis estimate = 1.76'
[Thu May 24 09:18:41 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Thu May 24 09:18:41 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Thu May 24 09:18:41 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.842
[Thu May 24 09:18:41 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.31"
[Thu May 24 11:06:27 2012] fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_src4.ximg exists
[Thu May 24 11:06:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_src4.csv
[Thu May 24 11:06:27 2012] fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu May 24 11:06:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_src4.csv
[Thu May 24 11:06:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 11:06:28 2012] fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu May 24 11:06:28 2012] fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu May 24 11:06:28 2012] Fit fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Thu May 24 15:49:26 2012] Spatial fit model total counts = 9805.170000, observed total counts = 9709.000000
[Thu May 24 15:49:26 2012] Offset between fit and detection position for source 4 = 0.272464 pixels
[Thu May 24 15:49:26 2012] 9797.620000 total counts/ 3681.500000 bgd. counts: snr = 100.800711
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.272464 pixels
  Position = (313.0, 317.5) = 18 41 19.36 -4 56 11.7
  Extent = 5.9 (5.8-6.0)", rotation angle = 0
  Source counts = 6116.1 +/- 99.0
  Background counts = 3681.5
  Rate = 2 +/- 0.04
[Thu May 24 15:49:26 2012] Vigneting correction estimate = 1.000000
[Thu May 24 15:49:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 15:49:26 2012] Assessing source extent using major axis lower bound
[Thu May 24 15:49:26 2012] Source does appear to be extended
[Thu May 24 15:49:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 15:49:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 15:49:46 2012] Initial guess for spatial extent in simple fitting = 5.90"
[Thu May 24 15:49:46 2012] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.871
[Thu May 24 15:49:46 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 5.90"
[Thu May 24 17:26:07 2012] fullrun_pn_xmm0013340101_pi300-10000_cl_pass1_src4.ximg exists
[Thu May 24 17:26:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013340101_pi300-10000_cl_pass1_src4.csv
[Thu May 24 17:26:07 2012] fullrun_pn_xmm0013340101_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu May 24 17:26:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013340101_pi300-10000_cl_pass1_src4.csv
[Thu May 24 17:26:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0013340101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0013340101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 17:26:07 2012] fullrun_pn_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu May 24 17:26:07 2012] fullrun_pn_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu May 24 17:26:07 2012] Fit fullrun_pn_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Thu May 24 21:02:18 2012] Spatial fit model total counts = 9812.510000, observed total counts = 9709.000000
[Thu May 24 21:02:18 2012] Offset between fit and detection position for source 4 = 0.001161 pixels
[Thu May 24 21:02:18 2012] 9806.010000 total counts/ 3686.050000 bgd. counts: snr = 100.801727
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.001161 pixels
  Position = (313.0, 317.5) = 18 41 19.36 -4 56 11.7
  Extent = 5.9 (5.8-6.0)", rotation angle = 0
  Source counts = 6120.0 +/- 99.0
  Background counts = 3686.1
  Rate = 2 +/- 0.04
[Thu May 24 21:02:18 2012] Vigneting correction estimate = 1.000000
[Thu May 24 21:02:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 21:02:18 2012] Assessing source extent using major axis lower bound
[Thu May 24 21:02:18 2012] Source does appear to be extended
[Thu May 24 21:02:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 21:02:36 2012] Counts = 6119.960000, rescaling region sizes by 2.000000
[Thu May 24 21:02:36 2012] XMMSAS src. selection expression = ellipse(27182.197704, 27576.920400, 706.269620, 706.269620, 0.000000, X, Y)
[Thu May 24 21:02:36 2012] Writing source region out to fullrun_pn_xmm0013340101_pi300-10000_pass1_cl_src4_src.reg
[Thu May 24 21:02:36 2012] Extracting stamp from image fullrun_pn_xmm0013340101_pi300-10000_cl_sm2.00.img.gz, (272, 277) - (354, 358)
[Thu May 24 21:02:36 2012] XMMSAS bgd. selection expression = annulus(27182.197704, 27576.920400, 2354.232068, 4708.464135, X, Y) && !ellipse(29051.086513, 27220.357013, 1223.232035, 345.962767, 91.671737, X, Y) && !ellipse(26892.206000, 26292.790000, 911.944026, 911.944026, 0.000000, X, Y) && !ellipse(27885.824000, 26190.242000, 1206.568035, 1206.568035, 0.000000, X, Y) && !ellipse(28500.642395, 27835.931915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28501.847778, 27270.633698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26487.670868, 26746.092834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28502.522156, 26575.977142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27170.886902, 25443.843445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25950.904800, 27466.688000, 747.327222, 747.327222, 0.000000, X, Y) && !ellipse(26673.007843, 29003.600525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27181.461884, 28870.102997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29238.525482, 28704.848663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25780.344513, 26832.683960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25393.883759, 26831.268829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25484.430878, 26138.311493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26683.934800, 25403.683600, 1282.480037, 620.060018, 14.947000, X, Y) && !ellipse(28426.944092, 28778.817780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27524.414673, 29345.480682, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 24 21:02:36 2012] Writing fullrun_pn_xmm0013340101_pi300-10000_pass1_cl_src4.gif
[Thu May 24 21:04:11 2012] Mean detx,y = (61.65, -279.79) 
[Thu May 24 21:04:14 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 21:05:22 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 21:05:23 2012] Setting source spectrum file to fullrun_pn_xmm0013340101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu May 24 21:05:23 2012] Setting bgd. spectrum file to fullrun_pn_xmm0013340101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu May 24 23:45:47 2012] Updating aperture counts using extracted products
[Thu May 24 23:45:47 2012] Error reading totcts from fullrun_pn_xmm0013340101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu May 24 23:45:48 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 23:45:48 2012] Using photon index=1.80, rate=2.44, arf fullrun_pn_xmm0013340101_pi300-10000_pass1_cl_src4.arf
[Thu May 24 23:45:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 23:45:48 2012] Updating source flux to 6.1e-12