[Thu May 24 09:17:06 2012] Detection parameters:
  Position = (299.2, 321.9) = 18 41 23.37 -4 55 51.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 541.4 +/- 29.7
  Background counts = 21.2
  Rate = 0.2 +/- 0.009

[Thu May 24 09:17:06 2012] Off-axis axis estimate = 1.70'
[Thu May 24 09:18:41 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Thu May 24 09:18:41 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Thu May 24 09:18:41 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Thu May 24 09:18:41 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.28"
[Thu May 24 11:06:27 2012] fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_src10.ximg exists
[Thu May 24 11:06:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_src10.csv
[Thu May 24 11:06:27 2012] fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu May 24 11:06:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_src10.csv
[Thu May 24 11:06:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 11:06:28 2012] fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu May 24 11:06:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu May 24 11:06:28 2012] fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu May 24 11:06:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu May 24 11:06:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 15:49:26 2012] Source 10 is offset by -0.665884 and -5.283162 pixels which is larger than
2 X fitted extent = 0.836556 x 0.836556, not incorporating fit results
[Thu May 24 15:49:26 2012] Spatial fit model total counts = 1584.020000, observed total counts = 1579.000000
[Thu May 24 15:49:26 2012] Offset between fit and detection position for source 10 = 6.105822 pixels
[Thu May 24 15:49:26 2012] Warning, changing simple spatial fit ID from 10 to 14
[Thu May 24 15:49:26 2012] 1577.936000 total counts/ 1389.220000 bgd. counts: snr = 5.063178
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 6.105822 pixels
  Position = (301.7, 316.3) = 18 41 22.66 -4 56 17.2
  Extent = 13.6 (13.6-27.3)", rotation angle = 0
  Source counts = 188.7 +/- 39.7
  Background counts = 1389.2
  Rate = 0.08 +/- 0.02
[Thu May 24 15:49:26 2012] Vigneting correction estimate = 1.000000
[Thu May 24 15:49:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 15:49:26 2012] Assessing source extent using major axis lower bound
[Thu May 24 15:49:26 2012] Source does appear to be extended
[Thu May 24 15:49:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 15:49:26 2012] Source is confused with source 7
[Thu May 24 15:49:26 2012] Source is confused with source 14
[Thu May 24 15:49:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 15:49:46 2012] Initial guess for spatial extent in simple fitting = 13.63"
[Thu May 24 15:49:46 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.928
[Thu May 24 15:49:46 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 13.63"
[Thu May 24 17:26:07 2012] fullrun_pn_xmm0013340101_pi300-10000_cl_pass1_src10.ximg exists
[Thu May 24 17:26:07 2012] fullrun_pn_xmm0013340101_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu May 24 17:26:07 2012] Fit fullrun_pn_xmm0013340101_pi300-10000_cl_pass1_src10 appears to have run properly
[Thu May 24 17:26:08 2012] fullrun_pn_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu May 24 17:26:08 2012] fullrun_pn_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu May 24 17:26:08 2012] Fit fullrun_pn_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Thu May 24 21:02:18 2012] Warning, spatial fit 10 centroid is now closest to src. 7
[Thu May 24 21:02:18 2012] Spatial fit model total counts = 1579.220000, observed total counts = 1579.000000
[Thu May 24 21:02:18 2012] Offset between fit and detection position for source 10 = 2.824795 pixels
[Thu May 24 21:02:18 2012] Warning, changing simple spatial fit ID from 10 to 14
[Thu May 24 21:02:18 2012] 1511.561000 total counts/ 1380.810000 bgd. counts: snr = 3.518666
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 2.824795 pixels
  Position = (298.8, 316.3) = 18 41 23.48 -4 56 17.2
  Extent = 9.3 (6.3-12.8)", rotation angle = 0
  Source counts = 130.8 +/- 38.9
  Background counts = 1380.8
  Rate = 0.05 +/- 0.02
[Thu May 24 21:02:18 2012] Vigneting correction estimate = 1.000000
[Thu May 24 21:02:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 21:02:18 2012] Assessing source extent using major axis lower bound
[Thu May 24 21:02:18 2012] Source does appear to be extended
[Thu May 24 21:02:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 21:02:36 2012] XMMSAS src. selection expression = ellipse(25950.904800, 27466.688000, 560.495416, 560.495416, 0.000000, X, Y)
[Thu May 24 21:02:36 2012] Writing source region out to fullrun_pn_xmm0013340101_pi300-10000_pass1_cl_src10_src.reg
[Thu May 24 21:02:36 2012] Extracting stamp from image fullrun_pn_xmm0013340101_pi300-10000_cl_sm2.00.img.gz, (267, 284) - (331, 348)
[Thu May 24 21:02:36 2012] XMMSAS bgd. selection expression = annulus(25950.904800, 27466.688000, 934.159027, 1868.318054, X, Y) && !ellipse(26892.206000, 26292.790000, 911.944026, 911.944026, 0.000000, X, Y) && !ellipse(27885.824000, 26190.242000, 1206.568035, 1206.568035, 0.000000, X, Y) && !ellipse(27182.197704, 27576.920400, 470.846414, 470.846414, 0.000000, X, Y) && !ellipse(28500.642395, 27835.931915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28501.847778, 27270.633698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26487.670868, 26746.092834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28502.522156, 26575.977142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27170.886902, 25443.843445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26673.007843, 29003.600525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27181.461884, 28870.102997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25780.344513, 26832.683960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25393.883759, 26831.268829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25484.430878, 26138.311493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26683.934800, 25403.683600, 1282.480037, 620.060018, 14.947000, X, Y) && !ellipse(28426.944092, 28778.817780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27524.414673, 29345.480682, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 24 21:02:36 2012] Writing fullrun_pn_xmm0013340101_pi300-10000_pass1_cl_src10.gif
[Thu May 24 21:07:41 2012] Mean detx,y = (-1117.95, -138.00) 
[Thu May 24 21:07:43 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 21:08:02 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 21:08:02 2012] Setting source spectrum file to fullrun_pn_xmm0013340101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu May 24 21:08:02 2012] Setting bgd. spectrum file to fullrun_pn_xmm0013340101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu May 24 23:45:47 2012] Updating aperture counts using extracted products
[Thu May 24 23:45:48 2012] Error reading totcts from fullrun_pn_xmm0013340101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu May 24 23:45:48 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 23:45:48 2012] Using photon index=1.80, rate=0.0522, arf fullrun_pn_xmm0013340101_pi300-10000_pass1_cl_src10.arf
[Thu May 24 23:45:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 23:45:48 2012] Updating source flux to 1.4e-13
[Thu May 24 23:49:15 2012] Flag b found in src. 10 procflags, skipping spectral fitting
[Thu May 24 23:49:15 2012] Flag c found in src. 10 procflags, skipping spectral fitting