[Thu May 24 09:17:51 2012] Detection parameters:
  Position = (335.9, 317.0) = 18 41 12.70 -4 56 14.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 489.7 +/- 29.4
  Background counts = 24.2
  Rate = 0.09 +/- 0.005

[Thu May 24 09:17:52 2012] Off-axis axis estimate = 3.03'
[Thu May 24 13:07:54 2012] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Thu May 24 13:07:54 2012] Initial guess for spatial extent in simple fitting = 7.94"
[Thu May 24 13:07:54 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.739
[Thu May 24 13:07:54 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.94"
[Thu May 24 15:49:18 2012] fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_src3.ximg exists
[Thu May 24 15:49:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_src3.csv
[Thu May 24 15:49:18 2012] fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu May 24 15:49:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_src3.csv
[Thu May 24 15:49:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 15:49:18 2012] fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu May 24 15:49:18 2012] fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu May 24 15:49:18 2012] Fit fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu May 24 15:49:37 2012] Spatial fit model total counts = 1417.020000, observed total counts = 1415.000000
[Thu May 24 15:49:37 2012] Offset between fit and detection position for source 8 = 0.608662 pixels
[Thu May 24 15:49:37 2012] 1215.776000 total counts/ 968.376000 bgd. counts: snr = 7.950193
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.608662 pixels
  Position = (335.6, 317.5) = 18 41 12.77 -4 56 11.7
  Extent = 11.1 (9.3-15.9)", rotation angle = 0
  Source counts = 247.4 +/- 34.9
  Background counts = 968.4
  Rate = 0.06 +/- 0.008
[Thu May 24 15:49:38 2012] Vigneting correction estimate = 1.000000
[Thu May 24 15:49:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 15:49:38 2012] Assessing source extent using major axis lower bound
[Thu May 24 15:49:38 2012] Source does appear to be extended
[Thu May 24 15:49:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 15:49:38 2012] Source is confused with source 1
[Thu May 24 18:56:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 18:56:49 2012] Initial guess for spatial extent in simple fitting = 11.12"
[Thu May 24 18:56:49 2012] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.124
[Thu May 24 18:56:49 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.12"
[Thu May 24 21:02:12 2012] fullrun_mos2_xmm0013340101_pi300-10000_cl_pass1_src3.ximg exists
[Thu May 24 21:02:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340101_pi300-10000_cl_pass1_src3.csv
[Thu May 24 21:02:12 2012] fullrun_mos2_xmm0013340101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu May 24 21:02:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340101_pi300-10000_cl_pass1_src3.csv
[Thu May 24 21:02:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0013340101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0013340101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 21:02:12 2012] fullrun_mos2_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu May 24 21:02:12 2012] fullrun_mos2_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May 24 21:02:13 2012] Fit fullrun_mos2_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu May 24 21:02:28 2012] Warning, spatial fit 3 centroid is now closest to src. 22
[Thu May 24 21:02:28 2012] Vigneting correction estimate = 1.000000
[Thu May 24 21:02:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 21:02:28 2012] Assessing source extent using major axis lower bound
[Thu May 24 21:02:28 2012] Source does appear to be extended
[Thu May 24 21:02:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 22:51:50 2012] XMMSAS src. selection expression = ellipse(29151.237400, 27576.695400, 667.212019, 667.212019, 0.000000, X, Y)
[Thu May 24 22:51:50 2012] Writing source region out to fullrun_mos2_xmm0013340101_pi300-10000_pass1_cl_src8_src.reg
[Thu May 24 22:51:50 2012] Extracting stamp from image fullrun_mos2_xmm0013340101_pi300-10000_cl_sm2.00.img.gz, (297, 279) - (374, 356)
[Thu May 24 22:51:50 2012] XMMSAS bgd. selection expression = annulus(29151.237400, 27576.695400, 1112.020032, 2224.040064, X, Y) && !ellipse(27180.081820, 27576.628200, 414.200812, 414.200812, 0.000000, X, Y) && !ellipse(29147.589200, 26933.721600, 1256.520036, 609.929618, 104.921000, X, Y) && !ellipse(27161.063293, 26661.588562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28270.414000, 25954.811800, 615.606418, 615.606418, 0.000000, X, Y) && !ellipse(27474.248800, 26127.631560, 1500.280043, 1500.280043, 0.000000, X, Y) && !ellipse(28479.155243, 27269.935425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28527.891000, 28110.720000, 1500.280043, 1500.280043, 0.000000, X, Y) && !ellipse(26546.973602, 26674.736267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26636.150726, 28043.456970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26406.660614, 25787.502472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26977.152069, 25626.241302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29040.755005, 26282.880493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28493.447266, 28562.416962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28059.728000, 29123.386000, 1274.896037, 1274.896037, 0.000000, X, Y) && !ellipse(29061.544200, 28465.566000, 1087.872031, 507.976015, 104.212000, X, Y) && !ellipse(27872.640350, 25179.983978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27398.898163, 29850.376984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26116.512000, 29151.876000, 1146.800033, 1146.800033, 0.000000, X, Y)
[Thu May 24 22:51:50 2012] Writing fullrun_mos2_xmm0013340101_pi300-10000_pass1_cl_src8.gif
[Thu May 24 22:52:19 2012] Mean detx,y = (-1816.18, 277.81) 
[Thu May 24 22:52:20 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 22:52:29 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 22:52:29 2012] Setting source spectrum file to fullrun_mos2_xmm0013340101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu May 24 22:52:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0013340101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Thu May 24 23:45:50 2012] Updating aperture counts using extracted products
[Thu May 24 23:45:50 2012] Error reading totcts from fullrun_mos2_xmm0013340101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu May 24 23:45:51 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 23:45:51 2012] Using photon index=1.80, rate=0.0603, arf fullrun_mos2_xmm0013340101_pi300-10000_pass1_cl_src8.arf
[Thu May 24 23:45:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 23:45:52 2012] Updating source flux to 5.9e-13
[Thu May 24 23:47:34 2012] Flag c found in src. 8 procflags, skipping spectral fitting