[Thu May 24 09:17:52 2012] Detection parameters:
  Position = (302.3, 284.1) = 18 41 22.47 -4 58 38.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.7 +/- 10.3
  Background counts = 18.0
  Rate = 0.008 +/- 0.002

[Thu May 24 09:17:52 2012] Off-axis axis estimate = 1.08'
[Thu May 24 13:07:54 2012] Using EEF radius (= 6.97 ")to estimate initial spatial extent for simple fitting
[Thu May 24 13:07:54 2012] Initial guess for spatial extent in simple fitting = 6.97"
[Thu May 24 13:07:54 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.906
[Thu May 24 13:07:54 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 6.97"
[Thu May 24 15:49:18 2012] fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_src29.ximg exists
[Thu May 24 15:49:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_src29.csv
[Thu May 24 15:49:18 2012] fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_src29_1.ximg exists
[Thu May 24 15:49:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_src29.csv
[Thu May 24 15:49:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 15:49:19 2012] fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Thu May 24 15:49:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Thu May 24 15:49:19 2012] fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Thu May 24 15:49:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Thu May 24 15:49:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 15:49:38 2012] Source 26 is offset by 6.200707 and 4.237754 pixels which is larger than
2 X fitted extent = 5.592460 x 1.701126, not incorporating fit results
[Thu May 24 15:49:38 2012] Vigneting correction estimate = 1.000000
[Thu May 24 15:49:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 15:49:38 2012] Assessing source extent using major
[Thu May 24 15:49:38 2012] Source does appear to be extended
[Thu May 24 15:49:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 15:49:38 2012] Deleting source due to low Poisson probability 0.9