[Thu May 24 09:17:52 2012] Detection parameters:
  Position = (326.3, 334.8) = 18 41 15.49 -4 54 56.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.2 +/- 17.3
  Background counts = 24.8
  Rate = 0.03 +/- 0.003

[Thu May 24 09:17:52 2012] Off-axis axis estimate = 3.32'
[Thu May 24 13:07:54 2012] Using EEF radius (= 8.09 ")to estimate initial spatial extent for simple fitting
[Thu May 24 13:07:54 2012] Initial guess for spatial extent in simple fitting = 8.09"
[Thu May 24 13:07:54 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.123
[Thu May 24 13:07:54 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 8.09"
[Thu May 24 15:49:18 2012] fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_src22.ximg exists
[Thu May 24 15:49:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_src22.csv
[Thu May 24 15:49:18 2012] fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu May 24 15:49:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_src22.csv
[Thu May 24 15:49:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 15:49:19 2012] fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu May 24 15:49:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Thu May 24 15:49:19 2012] fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu May 24 15:49:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Thu May 24 15:49:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 15:49:38 2012] Spatial fit model total counts = 1042.840000, observed total counts = 954.000000
[Thu May 24 15:49:38 2012] Offset between fit and detection position for source 25 = 3.241931 pixels
[Thu May 24 15:49:38 2012] Warning, changing simple spatial fit ID from 22 to 18
[Thu May 24 15:49:38 2012] 919.570000 total counts/ 739.411000 bgd. counts: snr = 6.625414
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 3.241931 pixels
  Position = (323.1, 335.3) = 18 41 16.43 -4 54 54.4
  Extent = 15.9 (15.9-31.9)", rotation angle = 0
  Source counts = 180.2 +/- 30.3
  Background counts = 739.4
  Rate = 0.04 +/- 0.007
[Thu May 24 15:49:38 2012] Spatial fit model total counts = 718.041000, observed total counts = 610.000000
[Thu May 24 15:49:38 2012] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 24 15:49:38 2012] Vigneting correction estimate = 1.000000
[Thu May 24 15:49:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 15:49:38 2012] Assessing source extent using major axis lower bound
[Thu May 24 15:49:38 2012] Source does appear to be extended
[Thu May 24 15:49:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 15:49:38 2012] Source is confused with source 15
[Thu May 24 18:56:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 18:56:49 2012] Initial guess for spatial extent in simple fitting = 15.94"
[Thu May 24 18:56:49 2012] source mask rpix=3.7, npix_max = 69, mask sum = 32, frac = 0.462
[Thu May 24 18:56:49 2012] Skipping simple spatial due to low active detector fraction
[Thu May 24 21:02:28 2012] Source 25 is offset by 3.352276 and -0.960161 pixels which is larger than
2 X fitted extent = 1.846147 x 1.846147, not incorporating fit results
[Thu May 24 21:02:28 2012] Source 25 is offset by 1.543103 and -0.272506 pixels which is larger than
2 X fitted extent = 0.917375 x 0.917375, not incorporating fit results
[Thu May 24 21:02:28 2012] Vigneting correction estimate = 1.000000
[Thu May 24 21:02:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 21:02:28 2012] Assessing source extent using major axis lower bound
[Thu May 24 21:02:28 2012] Source does appear to be extended
[Thu May 24 21:02:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 22:51:51 2012] XMMSAS src. selection expression = ellipse(28059.728000, 29123.386000, 956.172028, 956.172028, 0.000000, X, Y)
[Thu May 24 22:51:51 2012] Writing source region out to fullrun_mos2_xmm0013340101_pi300-10000_pass1_cl_src25_src.reg
[Thu May 24 22:51:51 2012] Extracting stamp from image fullrun_mos2_xmm0013340101_pi300-10000_cl_sm2.00.img.gz, (268, 280) - (378, 390)
[Thu May 24 22:51:51 2012] XMMSAS bgd. selection expression = annulus(28059.728000, 29123.386000, 1593.620046, 3187.240092, X, Y) && !ellipse(27180.081820, 27576.628200, 414.200812, 414.200812, 0.000000, X, Y) && !ellipse(29147.589200, 26933.721600, 1256.520036, 609.929618, 104.921000, X, Y) && !ellipse(29151.237400, 27576.695400, 889.616026, 889.616026, 0.000000, X, Y) && !ellipse(27161.063293, 26661.588562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25701.611854, 27663.735200, 616.658418, 616.658418, 0.000000, X, Y) && !ellipse(28270.414000, 25954.811800, 615.606418, 615.606418, 0.000000, X, Y) && !ellipse(27474.248800, 26127.631560, 1500.280043, 1500.280043, 0.000000, X, Y) && !ellipse(28479.155243, 27269.935425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28527.891000, 28110.720000, 1500.280043, 1500.280043, 0.000000, X, Y) && !ellipse(26546.973602, 26674.736267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26636.150726, 28043.456970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25011.700480, 27940.914800, 757.391222, 757.391222, 0.000000, X, Y) && !ellipse(26406.660614, 25787.502472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26977.152069, 25626.241302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29040.755005, 26282.880493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28493.447266, 28562.416962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25519.505000, 25921.410000, 885.224025, 885.224025, 0.000000, X, Y) && !ellipse(25026.151581, 27181.984924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25486.167267, 26694.484375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29061.544200, 28465.566000, 1087.872031, 507.976015, 104.212000, X, Y) && !ellipse(25332.998627, 28639.580078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27872.640350, 25179.983978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27398.898163, 29850.376984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26116.512000, 29151.876000, 1146.800033, 1146.800033, 0.000000, X, Y) && !ellipse(24564.261444, 26279.933411, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 24 22:51:51 2012] Writing fullrun_mos2_xmm0013340101_pi300-10000_pass1_cl_src25.gif
[Thu May 24 22:55:33 2012] Mean detx,y = (-629.55, 1553.26) 
[Thu May 24 22:55:34 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 22:55:44 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 22:55:44 2012] Setting source spectrum file to fullrun_mos2_xmm0013340101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Thu May 24 22:55:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0013340101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Thu May 24 23:45:50 2012] Updating aperture counts using extracted products
[Thu May 24 23:45:50 2012] Error reading totcts from fullrun_mos2_xmm0013340101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Thu May 24 23:45:53 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 23:45:53 2012] Using photon index=1.80, rate=0.0439, arf fullrun_mos2_xmm0013340101_pi300-10000_pass1_cl_src25.arf
[Thu May 24 23:45:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 23:45:53 2012] Updating source flux to 5.5e-13
[Thu May 24 23:47:34 2012] Flag b found in src. 25 procflags, skipping spectral fitting
[Thu May 24 23:47:34 2012] Flag p found in src. 25 procflags, skipping spectral fitting
[Thu May 24 23:47:34 2012] Flag c found in src. 25 procflags, skipping spectral fitting