[Thu May 24 09:17:52 2012] Detection parameters:
  Position = (288.2, 313.0) = 18 41 26.57 -4 56 31.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 167.1 +/- 18.5
  Background counts = 20.3
  Rate = 0.03 +/- 0.003

[Thu May 24 09:17:52 2012] Off-axis axis estimate = 1.29'
[Thu May 24 13:07:54 2012] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Thu May 24 13:07:54 2012] Initial guess for spatial extent in simple fitting = 7.07"
[Thu May 24 13:07:54 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.885
[Thu May 24 13:07:54 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 7.07"
[Thu May 24 15:49:18 2012] fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_src20.ximg exists
[Thu May 24 15:49:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_src20.csv
[Thu May 24 15:49:18 2012] fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_src20_1.ximg exists
[Thu May 24 15:49:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_src20.csv
[Thu May 24 15:49:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 15:49:19 2012] fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Thu May 24 15:49:19 2012] fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Thu May 24 15:49:19 2012] Fit fullrun_mos2_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Thu May 24 15:49:38 2012] Source 17 is offset by -0.061986 and -7.510173 pixels which is larger than
2 X fitted extent = 3.405251 x 3.405251, not incorporating fit results
[Thu May 24 15:49:38 2012] Source 17 is offset by 0.718064 and 3.819896 pixels which is larger than
2 X fitted extent = 0.836768 x 0.836768, not incorporating fit results
[Thu May 24 15:49:38 2012] Vigneting correction estimate = 1.000000
[Thu May 24 15:49:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 15:49:38 2012] Assessing source extent using major
[Thu May 24 15:49:38 2012] Source does appear to be extended
[Thu May 24 15:49:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 18:56:49 2012] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Thu May 24 18:56:49 2012] Initial guess for spatial extent in simple fitting = 7.07"
[Thu May 24 18:56:49 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.885
[Thu May 24 18:56:49 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 7.07"
[Thu May 24 21:02:12 2012] fullrun_mos2_xmm0013340101_pi300-10000_cl_pass1_src20.ximg exists
[Thu May 24 21:02:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340101_pi300-10000_cl_pass1_src20.csv
[Thu May 24 21:02:12 2012] fullrun_mos2_xmm0013340101_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu May 24 21:02:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013340101_pi300-10000_cl_pass1_src20.csv
[Thu May 24 21:02:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0013340101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0013340101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 21:02:13 2012] fullrun_mos2_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu May 24 21:02:13 2012] fullrun_mos2_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu May 24 21:02:13 2012] Fit fullrun_mos2_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Thu May 24 21:02:28 2012] Source 17 is offset by -0.081370 and -7.510173 pixels which is larger than
2 X fitted extent = 3.461324 x 3.461324, not incorporating fit results
[Thu May 24 21:02:28 2012] Source 17 is offset by 0.724248 and 3.781482 pixels which is larger than
2 X fitted extent = 0.841476 x 0.841476, not incorporating fit results
[Thu May 24 21:02:28 2012] Vigneting correction estimate = 1.000000
[Thu May 24 21:02:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 21:02:28 2012] Assessing source extent using major
[Thu May 24 21:02:28 2012] Source does appear to be extended
[Thu May 24 21:02:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 22:51:50 2012] XMMSAS src. selection expression = ellipse(25026.151581, 27181.984924, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 24 22:51:50 2012] Writing source region out to fullrun_mos2_xmm0013340101_pi300-10000_pass1_cl_src17_src.reg
[Thu May 24 22:51:50 2012] Extracting stamp from image fullrun_mos2_xmm0013340101_pi300-10000_cl_sm2.00.img.gz, (251, 275) - (326, 350)
[Thu May 24 22:51:51 2012] XMMSAS bgd. selection expression = annulus(25026.151581, 27181.984924, 1087.500000, 2175.000000, X, Y) && !ellipse(27180.081820, 27576.628200, 414.200812, 414.200812, 0.000000, X, Y) && !ellipse(27161.063293, 26661.588562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25701.611854, 27663.735200, 616.658418, 616.658418, 0.000000, X, Y) && !ellipse(27474.248800, 26127.631560, 1500.280043, 1500.280043, 0.000000, X, Y) && !ellipse(28527.891000, 28110.720000, 1500.280043, 1500.280043, 0.000000, X, Y) && !ellipse(26546.973602, 26674.736267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26636.150726, 28043.456970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25011.700480, 27940.914800, 757.391222, 757.391222, 0.000000, X, Y) && !ellipse(26406.660614, 25787.502472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26977.152069, 25626.241302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25519.505000, 25921.410000, 885.224025, 885.224025, 0.000000, X, Y) && !ellipse(25486.167267, 26694.484375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28059.728000, 29123.386000, 1274.896037, 1274.896037, 0.000000, X, Y) && !ellipse(25332.998627, 28639.580078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27872.640350, 25179.983978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27398.898163, 29850.376984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26116.512000, 29151.876000, 1146.800033, 1146.800033, 0.000000, X, Y) && !ellipse(24564.261444, 26279.933411, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 24 22:51:51 2012] Writing fullrun_mos2_xmm0013340101_pi300-10000_pass1_cl_src17.gif
[Thu May 24 22:55:11 2012] Mean detx,y = (2102.80, -405.58) 
[Thu May 24 22:55:12 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 22:55:20 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 22:55:20 2012] Setting source spectrum file to fullrun_mos2_xmm0013340101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu May 24 22:55:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0013340101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Thu May 24 23:35:48 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 24 23:35:48 2012] rmf not generated due to insufficient counts
[Thu May 24 23:45:50 2012] Updating aperture counts using extracted products
[Thu May 24 23:45:50 2012] Error reading totcts from fullrun_mos2_xmm0013340101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu May 24 23:45:52 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 23:45:52 2012] Using photon index=1.80, rate=0.0307, arf fullrun_mos2_xmm0013340101_pi300-10000_pass1_cl_src17.arf
[Thu May 24 23:45:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 23:45:53 2012] Updating source flux to 3.1e-13
[Thu May 24 23:47:34 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting