[Thu May 24 09:17:29 2012] Detection parameters: Position = (288.9, 321.9) = 18 41 26.36 -4 55 52.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 257.8 +/- 21.8 Background counts = 20.1 Rate = 0.05 +/- 0.004 [Thu May 24 09:17:30 2012] Off-axis axis estimate = 1.84' [Thu May 24 11:06:29 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting [Thu May 24 11:06:29 2012] Initial guess for spatial extent in simple fitting = 7.35" [Thu May 24 11:06:29 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.835 [Thu May 24 11:06:29 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.35" [Thu May 24 13:07:53 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_src9.ximg exists [Thu May 24 13:07:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_src9.csv [Thu May 24 13:07:53 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_src9_1.ximg exists [Thu May 24 13:07:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_src9.csv [Thu May 24 13:07:53 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_src9_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 24 13:07:53 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists [Thu May 24 13:07:53 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists [Thu May 24 13:07:53 2012] Fit fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly [Thu May 24 15:49:31 2012] Source 7 is offset by -6.807597 and 4.328317 pixels which is larger than 2 X fitted extent = 1.454009 x 1.454009, not incorporating fit results [Thu May 24 15:49:31 2012] Spatial fit model total counts = 605.677000, observed total counts = 622.000000 [Thu May 24 15:49:31 2012] Offset between fit and detection position for source 7 = 1.252730 pixels [Thu May 24 15:49:31 2012] Warning, changing simple spatial fit ID from 9 to 19 [Thu May 24 15:49:31 2012] 559.853900 total counts/ 520.687000 bgd. counts: snr = 1.716449 Spatial fit parameters: Offset between fit and detection position for source 7 = 1.252730 pixels Position = (288.4, 323.1) = 18 41 26.52 -4 55 47.7 Extent = 7.6 (4.8-10.6)", rotation angle = 0 Source counts = 39.2 +/- 23.7 Background counts = 520.7 Rate = 0.01 +/- 0.006 Deleting source due to low Poisson probability