[Thu May 24 09:17:29 2012] Detection parameters:
  Position = (313.1, 317.2) = 18 41 19.34 -4 56 11.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7410.9 +/- 102.5
  Background counts = 24.3
  Rate = 1 +/- 0.02

[Thu May 24 09:17:30 2012] Off-axis axis estimate = 1.73'
[Thu May 24 11:06:29 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu May 24 11:06:29 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu May 24 11:06:29 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Thu May 24 11:06:29 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Thu May 24 13:07:52 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 24 13:07:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_src1.csv
[Thu May 24 13:07:52 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 24 13:07:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_src1.csv
[Thu May 24 13:07:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 13:07:53 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 24 13:07:53 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 24 13:07:53 2012] Fit fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 24 15:49:31 2012] Spatial fit model total counts = 5948.910000, observed total counts = 5959.000000
[Thu May 24 15:49:31 2012] Offset between fit and detection position for source 3 = 0.287887 pixels
[Thu May 24 15:49:31 2012] 5916.230000 total counts/ 2360.570000 bgd. counts: snr = 73.183266
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.287887 pixels
  Position = (312.9, 317.4) = 18 41 19.40 -4 56 12.1
  Extent = 5.8 (5.7-6.0)", rotation angle = 0
  Source counts = 3555.7 +/- 76.9
  Background counts = 2360.6
  Rate = 0.9 +/- 0.02
[Thu May 24 15:49:31 2012] Vigneting correction estimate = 1.000000
[Thu May 24 15:49:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 15:49:31 2012] Assessing source extent using major axis lower bound
[Thu May 24 15:49:31 2012] Source does appear to be extended
[Thu May 24 15:49:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 17:26:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 17:26:08 2012] Initial guess for spatial extent in simple fitting = 5.81"
[Thu May 24 17:26:08 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.891
[Thu May 24 17:26:08 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.81"
[Thu May 24 18:56:48 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 24 18:56:48 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 24 18:56:48 2012] Fit fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu May 24 18:56:48 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 24 18:56:48 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 24 18:56:48 2012] Fit fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May 24 21:02:22 2012] Spatial fit model total counts = 5954.900000, observed total counts = 5959.000000
[Thu May 24 21:02:22 2012] Offset between fit and detection position for source 3 = 0.006571 pixels
[Thu May 24 21:02:22 2012] 5920.560000 total counts/ 2362.310000 bgd. counts: snr = 73.209597
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.006571 pixels
  Position = (312.9, 317.4) = 18 41 19.40 -4 56 12.1
  Extent = 5.8 (5.6-6.0)", rotation angle = 0
  Source counts = 3558.2 +/- 76.9
  Background counts = 2362.3
  Rate = 0.9 +/- 0.02
[Thu May 24 21:02:22 2012] Vigneting correction estimate = 1.000000
[Thu May 24 21:02:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 21:02:22 2012] Assessing source extent using major axis lower bound
[Thu May 24 21:02:22 2012] Source does appear to be extended
[Thu May 24 21:02:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 21:02:22 2012] Source is confused with source 9
[Thu May 24 21:52:44 2012] Counts = 3558.250000, rescaling region sizes by 2.000000
[Thu May 24 21:52:44 2012] XMMSAS src. selection expression = ellipse(27170.479260, 27569.153800, 694.419620, 694.419620, 0.000000, X, Y)
[Thu May 24 21:52:44 2012] Writing source region out to fullrun_mos1_xmm0013340101_pi300-10000_pass1_cl_src3_src.reg
[Thu May 24 21:52:44 2012] Extracting stamp from image fullrun_mos1_xmm0013340101_pi300-10000_cl_sm2.00.img.gz, (273, 278) - (353, 357)
[Thu May 24 21:52:44 2012] XMMSAS bgd. selection expression = annulus(27170.479260, 27569.153800, 2314.732067, 4629.464133, X, Y) && !ellipse(26966.810600, 26339.716400, 1035.368030, 1035.368030, 0.000000, X, Y) && !ellipse(29130.031800, 27288.092000, 1254.464036, 1254.464036, 0.000000, X, Y) && !ellipse(25933.274400, 27827.150000, 894.432026, 894.432026, 0.000000, X, Y) && !ellipse(29055.126200, 27013.094000, 1239.240036, 1239.240036, 0.000000, X, Y) && !ellipse(28654.260000, 28451.262000, 2487.928072, 2487.928072, 0.000000, X, Y) && !ellipse(28264.636841, 27003.306763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27453.217407, 28562.098358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27279.132446, 25434.256134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26041.867554, 25715.856506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25603.582600, 25817.146000, 1066.336031, 1066.336031, 0.000000, X, Y) && !ellipse(26376.786000, 25571.506000, 1044.320030, 1044.320030, 0.000000, X, Y) && !ellipse(25275.047302, 26925.591400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28179.222000, 29417.004000, 1270.360037, 1270.360037, 0.000000, X, Y) && !ellipse(25347.951752, 28558.909668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27355.714111, 29178.843079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29699.696000, 29707.966000, 1338.504039, 1338.504039, 0.000000, X, Y) && !ellipse(26184.429352, 29407.380035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28697.528748, 29268.006927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27517.323090, 29616.851227, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 24 21:52:44 2012] Writing fullrun_mos1_xmm0013340101_pi300-10000_pass1_cl_src3.gif
[Thu May 24 21:52:46 2012] Mean detx,y = (335.19, -266.96) 
[Thu May 24 21:52:47 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 21:53:01 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 21:53:01 2012] Setting source spectrum file to fullrun_mos1_xmm0013340101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May 24 21:53:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0013340101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu May 24 23:45:48 2012] Updating aperture counts using extracted products
[Thu May 24 23:45:48 2012] Error reading totcts from fullrun_mos1_xmm0013340101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May 24 23:45:49 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 23:45:49 2012] Using photon index=1.80, rate=0.869, arf fullrun_mos1_xmm0013340101_pi300-10000_pass1_cl_src3.arf
[Thu May 24 23:45:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 23:45:49 2012] Updating source flux to 8.5e-12
[Thu May 24 23:45:55 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Thu May 24 23:47:34 2012] Reading fit data from xmm0013340101/analysis//spectral/fullrun_mos1_xmm0013340101_pi300-10000_pass1_cl_src3_pl.csv
[Thu May 24 23:47:34 2012] Spectral fit parameter nH value = 2.49699e+22
[Thu May 24 23:47:34 2012] Spectral fit parameter PhoIndex value = 3.05863
[Thu May 24 23:47:34 2012] Failed to get F(0.3-8.0) from xmm0013340101/analysis//spectral/fullrun_mos1_xmm0013340101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Thu May 24 23:47:34 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 23:47:34 2012] Using Nh = 2.5e+22, photon index=3.06, rate=0.869, arf fullrun_mos1_xmm0013340101_pi300-10000_pass1_cl_src3.arf
[Thu May 24 23:47:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 23:47:34 2012] Updating source flux to 1.2e-11