[Thu May 24 09:17:29 2012] Detection parameters:
  Position = (310.1, 302.1) = 18 41 20.21 -4 57 18.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 599.3 +/- 31.9
  Background counts = 21.9
  Rate = 0.1 +/- 0.006

[Thu May 24 09:17:30 2012] Off-axis axis estimate = 0.88'
[Thu May 24 11:06:29 2012] Using EEF radius (= 6.87 ")to estimate initial spatial extent for simple fitting
[Thu May 24 11:06:29 2012] Initial guess for spatial extent in simple fitting = 6.87"
[Thu May 24 11:06:29 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.925
[Thu May 24 11:06:29 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 6.87"
[Thu May 24 13:07:53 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_src2.ximg exists
[Thu May 24 13:07:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_src2.csv
[Thu May 24 13:07:53 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu May 24 13:07:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_src2.csv
[Thu May 24 13:07:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 13:07:53 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu May 24 13:07:53 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May 24 13:07:53 2012] Fit fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu May 24 15:49:31 2012] Spatial fit model total counts = 1590.280000, observed total counts = 1590.000000
[Thu May 24 15:49:31 2012] Offset between fit and detection position for source 2 = 1.280773 pixels
[Thu May 24 15:49:31 2012] 1538.068000 total counts/ 1114.120000 bgd. counts: snr = 12.701254
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.280773 pixels
  Position = (310.5, 303.3) = 18 41 20.08 -4 57 13.6
  Extent = 12.9 (11.3-13.7)", rotation angle = 0
  Source counts = 423.9 +/- 39.2
  Background counts = 1114.1
  Rate = 0.1 +/- 0.01
[Thu May 24 15:49:31 2012] Vigneting correction estimate = 1.000000
[Thu May 24 15:49:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 15:49:31 2012] Assessing source extent using major axis lower bound
[Thu May 24 15:49:31 2012] Source does appear to be extended
[Thu May 24 15:49:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 17:26:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 17:26:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 24 17:26:08 2012] Initial guess for spatial extent in simple fitting = 12.94"
[Thu May 24 17:26:08 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.014
[Thu May 24 17:26:08 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 12.94"
[Thu May 24 18:56:48 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_src2.ximg exists
[Thu May 24 18:56:48 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu May 24 18:56:48 2012] Fit fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_src2 appears to have run properly
[Thu May 24 18:56:48 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu May 24 18:56:48 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu May 24 18:56:48 2012] Fit fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu May 24 21:02:22 2012] Warning, spatial fit 2 centroid is now closest to src. 13
[Thu May 24 21:02:22 2012] Vigneting correction estimate = 1.000000
[Thu May 24 21:02:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 21:02:22 2012] Assessing source extent using major axis lower bound
[Thu May 24 21:02:22 2012] Source does appear to be extended
[Thu May 24 21:02:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 21:52:44 2012] XMMSAS src. selection expression = ellipse(26966.810600, 26339.716400, 776.526022, 776.526022, 0.000000, X, Y)
[Thu May 24 21:52:44 2012] Writing source region out to fullrun_mos1_xmm0013340101_pi300-10000_pass1_cl_src2_src.reg
[Thu May 24 21:52:44 2012] Extracting stamp from image fullrun_mos1_xmm0013340101_pi300-10000_cl_sm2.00.img.gz, (266, 259) - (355, 348)
[Thu May 24 21:52:44 2012] XMMSAS bgd. selection expression = annulus(26966.810600, 26339.716400, 1294.210037, 2588.420074, X, Y) && !ellipse(27170.479260, 27569.153800, 462.946413, 462.946413, 0.000000, X, Y) && !ellipse(29130.031800, 27288.092000, 1254.464036, 1254.464036, 0.000000, X, Y) && !ellipse(25933.274400, 27827.150000, 894.432026, 894.432026, 0.000000, X, Y) && !ellipse(29055.126200, 27013.094000, 1239.240036, 1239.240036, 0.000000, X, Y) && !ellipse(28654.260000, 28451.262000, 2487.928072, 2487.928072, 0.000000, X, Y) && !ellipse(28264.636841, 27003.306763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27453.217407, 28562.098358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27279.132446, 25434.256134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26041.867554, 25715.856506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25603.582600, 25817.146000, 1066.336031, 1066.336031, 0.000000, X, Y) && !ellipse(26376.786000, 25571.506000, 1044.320030, 1044.320030, 0.000000, X, Y) && !ellipse(25275.047302, 26925.591400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28179.222000, 29417.004000, 1270.360037, 1270.360037, 0.000000, X, Y) && !ellipse(25347.951752, 28558.909668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27355.714111, 29178.843079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29699.696000, 29707.966000, 1338.504039, 1338.504039, 0.000000, X, Y) && !ellipse(26184.429352, 29407.380035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28697.528748, 29268.006927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27517.323090, 29616.851227, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 24 21:52:44 2012] Writing fullrun_mos1_xmm0013340101_pi300-10000_pass1_cl_src2.gif
[Thu May 24 21:53:03 2012] Mean detx,y = (-826.25, -312.45) 
[Thu May 24 21:53:04 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 21:53:14 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 21:53:14 2012] Setting source spectrum file to fullrun_mos1_xmm0013340101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 24 21:53:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0013340101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu May 24 23:45:48 2012] Updating aperture counts using extracted products
[Thu May 24 23:45:48 2012] Error reading totcts from fullrun_mos1_xmm0013340101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 24 23:45:49 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 23:45:49 2012] Using photon index=1.80, rate=0.104, arf fullrun_mos1_xmm0013340101_pi300-10000_pass1_cl_src2.arf
[Thu May 24 23:45:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 23:45:49 2012] Updating source flux to 1e-12