[Thu May 24 09:17:29 2012] Detection parameters:
  Position = (314.1, 292.9) = 18 41 19.04 -4 57 59.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 188.0 +/- 19.3
  Background counts = 20.1
  Rate = 0.03 +/- 0.004

[Thu May 24 09:17:30 2012] Off-axis axis estimate = 1.21'
[Thu May 24 11:06:29 2012] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Thu May 24 11:06:29 2012] Initial guess for spatial extent in simple fitting = 7.03"
[Thu May 24 11:06:29 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.893
[Thu May 24 11:06:29 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.03"
[Thu May 24 13:07:53 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_src11.ximg exists
[Thu May 24 13:07:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_src11.csv
[Thu May 24 13:07:53 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu May 24 13:07:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_src11.csv
[Thu May 24 13:07:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 13:07:53 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu May 24 13:07:53 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu May 24 13:07:53 2012] Fit fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu May 24 15:49:31 2012] Warning, spatial fit 11 centroid is now closest to src. 1
[Thu May 24 15:49:31 2012] Vigneting correction estimate = 1.000000
[Thu May 24 15:49:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 15:49:31 2012] Assessing source extent using major
[Thu May 24 15:49:31 2012] Source does appear to be extended
[Thu May 24 15:49:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 17:26:08 2012] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Thu May 24 17:26:08 2012] Initial guess for spatial extent in simple fitting = 7.03"
[Thu May 24 17:26:08 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.893
[Thu May 24 17:26:08 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 7.03"
[Thu May 24 18:56:48 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_src9.ximg exists
[Thu May 24 18:56:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_src9.csv
[Thu May 24 18:56:48 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu May 24 18:56:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_src9.csv
[Thu May 24 18:56:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 18:56:48 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu May 24 18:56:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Thu May 24 18:56:48 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu May 24 18:56:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Thu May 24 18:56:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 21:02:22 2012] Warning, spatial fit 9 centroid is now closest to src. 16
[Thu May 24 21:02:22 2012] Source 17 is offset by 7.353982 and 6.661979 pixels which is larger than
2 X fitted extent = 1.532092 x 1.532092, not incorporating fit results
[Thu May 24 21:02:22 2012] Source 17 is offset by 4.048603 and -7.314182 pixels which is larger than
2 X fitted extent = 1.759830 x 1.759830, not incorporating fit results
[Thu May 24 21:02:22 2012] Vigneting correction estimate = 1.000000
[Thu May 24 21:02:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 21:02:22 2012] Assessing source extent using major
[Thu May 24 21:02:22 2012] Source does appear to be extended
[Thu May 24 21:02:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 21:52:44 2012] XMMSAS src. selection expression = ellipse(27279.132446, 25434.256134, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 24 21:52:44 2012] Writing source region out to fullrun_mos1_xmm0013340101_pi300-10000_pass1_cl_src17_src.reg
[Thu May 24 21:52:44 2012] Extracting stamp from image fullrun_mos1_xmm0013340101_pi300-10000_cl_sm2.00.img.gz, (277, 255) - (352, 330)
[Thu May 24 21:52:44 2012] XMMSAS bgd. selection expression = annulus(27279.132446, 25434.256134, 1087.500000, 2175.000000, X, Y) && !ellipse(27170.479260, 27569.153800, 462.946413, 462.946413, 0.000000, X, Y) && !ellipse(26966.810600, 26339.716400, 1035.368030, 1035.368030, 0.000000, X, Y) && !ellipse(29130.031800, 27288.092000, 1254.464036, 1254.464036, 0.000000, X, Y) && !ellipse(25933.274400, 27827.150000, 894.432026, 894.432026, 0.000000, X, Y) && !ellipse(29055.126200, 27013.094000, 1239.240036, 1239.240036, 0.000000, X, Y) && !ellipse(28654.260000, 28451.262000, 2487.928072, 2487.928072, 0.000000, X, Y) && !ellipse(28264.636841, 27003.306763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26041.867554, 25715.856506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25603.582600, 25817.146000, 1066.336031, 1066.336031, 0.000000, X, Y) && !ellipse(26376.786000, 25571.506000, 1044.320030, 1044.320030, 0.000000, X, Y) && !ellipse(25275.047302, 26925.591400, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 24 21:52:44 2012] Writing fullrun_mos1_xmm0013340101_pi300-10000_pass1_cl_src17.gif
[Thu May 24 21:55:48 2012] Mean detx,y = (-1705.78, 3.93) 
[Thu May 24 21:55:49 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 21:55:57 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 21:55:57 2012] Setting source spectrum file to fullrun_mos1_xmm0013340101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu May 24 21:55:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0013340101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Thu May 24 22:44:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 24 22:44:59 2012] rmf not generated due to insufficient counts
[Thu May 24 23:45:48 2012] Updating aperture counts using extracted products
[Thu May 24 23:45:49 2012] Error reading totcts from fullrun_mos1_xmm0013340101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu May 24 23:45:49 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 23:45:49 2012] Using photon index=1.80, rate=0.0343, arf fullrun_mos1_xmm0013340101_pi300-10000_pass1_cl_src17.arf
[Thu May 24 23:45:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 23:45:49 2012] Updating source flux to 3.5e-13
[Thu May 24 23:45:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting