[Thu May 24 09:17:29 2012] Detection parameters: Position = (292.9, 301.9) = 18 41 25.20 -4 57 18.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 170.2 +/- 18.5 Background counts = 19.3 Rate = 0.03 +/- 0.003 [Thu May 24 09:17:30 2012] Off-axis axis estimate = 0.47' [Thu May 24 11:06:29 2012] Using EEF radius (= 6.66 ")to estimate initial spatial extent for simple fitting [Thu May 24 11:06:29 2012] Initial guess for spatial extent in simple fitting = 6.66" [Thu May 24 11:06:29 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.969 [Thu May 24 11:06:29 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 6.66" [Thu May 24 13:07:53 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_src13.ximg exists [Thu May 24 13:07:53 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_src13_1.ximg exists [Thu May 24 13:07:53 2012] Fit fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_src13 appears to have run properly [Thu May 24 13:07:53 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists [Thu May 24 13:07:53 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists [Thu May 24 13:07:53 2012] Fit fullrun_mos1_xmm0013340101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly [Thu May 24 15:49:31 2012] Spatial fit model total counts = 769.148000, observed total counts = 772.000000 [Thu May 24 15:49:31 2012] Offset between fit and detection position for source 14 = 4.758431 pixels [Thu May 24 15:49:31 2012] Warning, changing simple spatial fit ID from 13 to 12 [Thu May 24 15:49:31 2012] 793.868000 total counts/ 665.514000 bgd. counts: snr = 4.975432 Spatial fit parameters: Offset between fit and detection position for source 14 = 4.758431 pixels Position = (294.7, 297.5) = 18 41 24.67 -4 57 38.7 Extent = 13.1 (13.0-26.1)", rotation angle = 0 Source counts = 128.4 +/- 28.2 Background counts = 665.5 Rate = 0.03 +/- 0.007 [Thu May 24 15:49:31 2012] Spatial fit model total counts = 640.799000, observed total counts = 639.000000 [Thu May 24 15:49:31 2012] Offset between fit and detection position for source 14 = 0.251688 pixels [Thu May 24 15:49:31 2012] Warning, changing simple spatial fit ID from 12 to 13 [Thu May 24 15:49:31 2012] 661.729000 total counts/ 532.016000 bgd. counts: snr = 5.623687 Spatial fit parameters: Offset between fit and detection position for source 14 = 0.251688 pixels Position = (294.9, 297.3) = 18 41 24.64 -4 57 39.7 Extent = 13.3 (13.3-26.7)", rotation angle = 0 Source counts = 129.7 +/- 25.7 Background counts = 532.0 Rate = 0.03 +/- 0.006 [Thu May 24 15:49:31 2012] Vigneting correction estimate = 1.000000 [Thu May 24 15:49:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 24 15:49:31 2012] Assessing source extent using major axis lower bound [Thu May 24 15:49:31 2012] Source does appear to be extended [Thu May 24 15:49:31 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 24 15:49:31 2012] Source is confused with source 15 [Thu May 24 17:26:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Thu May 24 17:26:08 2012] Initial guess for spatial extent in simple fitting = 13.33" [Thu May 24 17:26:08 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.964 [Thu May 24 17:26:08 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 13.33" [Thu May 24 18:56:48 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_src11.ximg exists [Thu May 24 18:56:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_src11.csv [Thu May 24 18:56:48 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_src11_1.ximg exists [Thu May 24 18:56:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_src11.csv [Thu May 24 18:56:48 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_src11_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 24 18:56:48 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists [Thu May 24 18:56:48 2012] fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists [Thu May 24 18:56:48 2012] Fit fullrun_mos1_xmm0013340101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly [Thu May 24 21:02:22 2012] Warning, spatial fit 11 centroid is now closest to src. 17 [Thu May 24 21:02:22 2012] Vigneting correction estimate = 1.000000 [Thu May 24 21:02:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 24 21:02:22 2012] Assessing source extent using major axis lower bound [Thu May 24 21:02:22 2012] Source does appear to be extended [Thu May 24 21:02:22 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 24 21:52:44 2012] XMMSAS src. selection expression = ellipse(25603.582600, 25817.146000, 799.752023, 799.752023, 0.000000, X, Y) [Thu May 24 21:52:44 2012] Writing source region out to fullrun_mos1_xmm0013340101_pi300-10000_pass1_cl_src14_src.reg [Thu May 24 21:52:44 2012] Extracting stamp from image fullrun_mos1_xmm0013340101_pi300-10000_cl_sm2.00.img.gz, (249, 251) - (341, 343) [Thu May 24 21:52:44 2012] XMMSAS bgd. selection expression = annulus(25603.582600, 25817.146000, 1332.920038, 2665.840077, X, Y) && !ellipse(27170.479260, 27569.153800, 462.946413, 462.946413, 0.000000, X, Y) && !ellipse(26966.810600, 26339.716400, 1035.368030, 1035.368030, 0.000000, X, Y) && !ellipse(29130.031800, 27288.092000, 1254.464036, 1254.464036, 0.000000, X, Y) && !ellipse(25933.274400, 27827.150000, 894.432026, 894.432026, 0.000000, X, Y) && !ellipse(29055.126200, 27013.094000, 1239.240036, 1239.240036, 0.000000, X, Y) && !ellipse(28654.260000, 28451.262000, 2487.928072, 2487.928072, 0.000000, X, Y) && !ellipse(28264.636841, 27003.306763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27453.217407, 28562.098358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27279.132446, 25434.256134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26041.867554, 25715.856506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26376.786000, 25571.506000, 1044.320030, 1044.320030, 0.000000, X, Y) && !ellipse(25275.047302, 26925.591400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28179.222000, 29417.004000, 1270.360037, 1270.360037, 0.000000, X, Y) && !ellipse(25347.951752, 28558.909668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27355.714111, 29178.843079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28697.528748, 29268.006927, 870.000000, 870.000000, 0.000000, X, Y) [Thu May 24 21:52:44 2012] Writing fullrun_mos1_xmm0013340101_pi300-10000_pass1_cl_src14.gif [Thu May 24 21:56:11 2012] Mean detx,y = (-1455.58, -1588.05) [Thu May 24 21:56:12 2012] Setting backscal keywords in source and bgd. spectrum [Thu May 24 21:56:22 2012] Binned source spectrum to 10 counts/bin [Thu May 24 21:56:23 2012] Setting source spectrum file to fullrun_mos1_xmm0013340101_pi300-10000_pass1_cl_src14_src_b10.pi.gz [Thu May 24 21:56:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0013340101_pi300-10000_pass1_cl_src14_bgd.pi.gz [Thu May 24 23:45:49 2012] Updating aperture counts using extracted products [Thu May 24 23:45:49 2012] Error reading totcts from fullrun_mos1_xmm0013340101_pi300-10000_pass1_cl_src14_src_b10.pi.gz [Thu May 24 23:45:49 2012] Calculating source flux in energy range 0.30-8.00 [Thu May 24 23:45:49 2012] Using photon index=1.80, rate=0.0317, arf fullrun_mos1_xmm0013340101_pi300-10000_pass1_cl_src14.arf [Thu May 24 23:45:49 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 24 23:45:49 2012] Updating source flux to 3.2e-13 [Thu May 24 23:45:55 2012] Flag c found in src. 14 procflags, skipping spectral fitting