[Sat Jun 16 18:39:53 2012] Detection parameters:
  Position = (184.3, 143.1) = 14 13 46.85 -3 22 2.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.5 +/- 12.8
  Background counts = 8.3
  Rate = 0.01 +/- 0.001

[Sat Jun 16 18:39:53 2012] Off-axis axis estimate = 13.97'
[Sat Jun 16 18:41:49 2012] Using EEF radius (= 13.41 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 18:41:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 16 18:41:49 2012] Initial guess for spatial extent in simple fitting = 13.41"
[Sat Jun 16 18:41:49 2012] source mask rpix=3.1, npix_max = 51, mask sum = 45, frac = 0.876
[Sat Jun 16 18:41:49 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 13.41"
[Sat Jun 16 19:08:46 2012] fullrun_pn_xmm0013140201_pi300-10000_cl_pass0_src18.ximg exists
[Sat Jun 16 19:08:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013140201_pi300-10000_cl_pass0_src18.csv
[Sat Jun 16 19:08:46 2012] fullrun_pn_xmm0013140201_pi300-10000_cl_pass0_src18_1.ximg exists
[Sat Jun 16 19:08:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013140201_pi300-10000_cl_pass0_src18.csv
[Sat Jun 16 19:08:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0013140201_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0013140201_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 19:08:47 2012] fullrun_pn_xmm0013140201_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sat Jun 16 19:08:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013140201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sat Jun 16 19:08:47 2012] fullrun_pn_xmm0013140201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sat Jun 16 19:08:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013140201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sat Jun 16 19:08:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0013140201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0013140201_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 20:28:59 2012] Spatial fit model total counts = 241.798000, observed total counts = 176.000000
[Sat Jun 16 20:28:59 2012] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 16 20:28:59 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 20:28:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 20:28:59 2012] Assessing source extent using major
[Sat Jun 16 20:28:59 2012] Source does appear to be extended
[Sat Jun 16 20:28:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 20:28:59 2012] Deleting source due to low Poisson probability 1.0