[Sat Jun 16 18:39:53 2012] Detection parameters: Position = (223.8, 175.1) = 14 13 35.37 -3 19 43.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 45.8 +/- 9.6 Background counts = 10.6 Rate = 0.008 +/- 0.002 [Sat Jun 16 18:39:53 2012] Off-axis axis estimate = 10.45' [Sat Jun 16 18:41:49 2012] Using EEF radius (= 11.65 ")to estimate initial spatial extent for simple fitting [Sat Jun 16 18:41:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Jun 16 18:41:49 2012] Initial guess for spatial extent in simple fitting = 11.65" [Sat Jun 16 18:41:49 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.890 [Sat Jun 16 18:41:49 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 11.65" [Sat Jun 16 19:08:46 2012] fullrun_pn_xmm0013140201_pi300-10000_cl_pass0_src17.ximg exists [Sat Jun 16 19:08:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013140201_pi300-10000_cl_pass0_src17.csv [Sat Jun 16 19:08:46 2012] fullrun_pn_xmm0013140201_pi300-10000_cl_pass0_src17_1.ximg exists [Sat Jun 16 19:08:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013140201_pi300-10000_cl_pass0_src17.csv [Sat Jun 16 19:08:46 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0013140201_pi300-10000_cl_pass0_src17_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0013140201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 16 19:08:47 2012] fullrun_pn_xmm0013140201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists [Sat Jun 16 19:08:47 2012] fullrun_pn_xmm0013140201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists [Sat Jun 16 19:08:47 2012] Fit fullrun_pn_xmm0013140201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly [Sat Jun 16 20:28:59 2012] Spatial fit model total counts = 140.203000, observed total counts = 134.000000 [Sat Jun 16 20:28:59 2012] Offset between fit and detection position for source 18 = 0.205831 pixels [Sat Jun 16 20:28:59 2012] 140.022400 total counts/ 108.141000 bgd. counts: snr = 3.065789 Spatial fit parameters: Offset between fit and detection position for source 18 = 0.205831 pixels Position = (224.0, 175.0) = 14 13 35.31 -3 19 43.8 Extent = 5.2 (3.8-7.2)", rotation angle = 0 Source counts = 31.9 +/- 11.8 Background counts = 108.1 Rate = 0.003 +/- 0.001 [Sat Jun 16 20:28:59 2012] Vigneting correction estimate = 1.000000 [Sat Jun 16 20:28:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 16 20:28:59 2012] Assessing source extent using major axis lower bound [Sat Jun 16 20:28:59 2012] Source does appear to be extended [Sat Jun 16 20:28:59 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 16 20:28:59 2012] Deleting source due to low Poisson probability 0.7