[Sat Jun 16 18:40:30 2012] Detection parameters:
  Position = (456.5, 217.0) = 14 12 27.77 -3 16 41.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.8 +/- 8.2
  Background counts = 2.6
  Rate = 0.003 +/- 0.0006

[Sat Jun 16 18:40:30 2012] Off-axis axis estimate = 12.90'
[Sat Jun 16 19:31:59 2012] Using EEF radius (= 12.88 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 19:31:59 2012] Initial guess for spatial extent in simple fitting = 12.88"
[Sat Jun 16 19:31:59 2012] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.023
[Sat Jun 16 19:31:59 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 12.88"
[Sat Jun 16 20:28:56 2012] fullrun_mos2_xmm0013140201_pi300-10000_cl_pass0_src14.ximg exists
[Sat Jun 16 20:28:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013140201_pi300-10000_cl_pass0_src14.csv
[Sat Jun 16 20:28:56 2012] fullrun_mos2_xmm0013140201_pi300-10000_cl_pass0_src14_1.ximg exists
[Sat Jun 16 20:28:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013140201_pi300-10000_cl_pass0_src14.csv
[Sat Jun 16 20:28:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0013140201_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0013140201_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 20:28:56 2012] fullrun_mos2_xmm0013140201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sat Jun 16 20:28:56 2012] fullrun_mos2_xmm0013140201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sat Jun 16 20:28:56 2012] Fit fullrun_mos2_xmm0013140201_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Sat Jun 16 20:29:05 2012] Spatial fit model total counts = 51.571900, observed total counts = 54.000000
[Sat Jun 16 20:29:05 2012] Offset between fit and detection position for source 18 = 1.197998 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 1.197998 pixels
  Position = (455.5, 216.3) = 14 12 28.08 -3 16 44.1
  Extent = 12.2 (8.8-14.1)", rotation angle = 0
  Source counts = 53.8 +/- 7.3
  Background counts = 0.0
  Rate = 0.004 +/- 0.0006
 Deleting source due to low signal-to-noise ratio