[Sat Jun 16 18:40:30 2012] Detection parameters:
  Position = (255.6, 296.8) = 14 13 26.13 -3 10 54.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26.9 +/- 7.5
  Background counts = 7.8
  Rate = 0.002 +/- 0.0007

[Sat Jun 16 18:40:30 2012] Off-axis axis estimate = 3.11'
[Sat Jun 16 19:31:59 2012] Using EEF radius (= 7.98 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 19:31:59 2012] Initial guess for spatial extent in simple fitting = 7.98"
[Sat Jun 16 19:31:59 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.146
[Sat Jun 16 19:31:59 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 7.98"
[Sat Jun 16 20:28:56 2012] fullrun_mos2_xmm0013140201_pi300-10000_cl_pass0_src19.ximg exists
[Sat Jun 16 20:28:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0013140201_pi300-10000_cl_pass0_src19.csv
[Sat Jun 16 20:28:56 2012] fullrun_mos2_xmm0013140201_pi300-10000_cl_pass0_src19_1.ximg exists
[Sat Jun 16 20:28:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0013140201_pi300-10000_cl_pass0_src19.csv
[Sat Jun 16 20:28:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0013140201_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0013140201_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 20:28:56 2012] fullrun_mos2_xmm0013140201_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sat Jun 16 20:28:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0013140201_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sat Jun 16 20:28:56 2012] fullrun_mos2_xmm0013140201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Jun 16 20:28:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0013140201_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sat Jun 16 20:28:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0013140201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0013140201_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 20:29:05 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 10.793917 pixels away
[Sat Jun 16 20:29:05 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 20:29:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 20:29:05 2012] Assessing source extent using major
[Sat Jun 16 20:29:05 2012] Source does appear to be extended
[Sat Jun 16 20:29:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 20:29:05 2012] Deleting source due to low Poisson probability 0.8