[Sat Jun 16 18:40:30 2012] Detection parameters:
  Position = (293.8, 275.1) = 14 13 15.04 -3 12 28.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55857.4 +/- 279.2
  Background counts = 9.7
  Rate = 4 +/- 0.02

[Sat Jun 16 18:40:30 2012] Off-axis axis estimate = 1.73'
[Sat Jun 16 19:31:59 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 19:31:59 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Jun 16 19:31:59 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Sat Jun 16 19:31:59 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sat Jun 16 20:28:55 2012] fullrun_mos2_xmm0013140201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 16 20:28:55 2012] fullrun_mos2_xmm0013140201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 16 20:28:55 2012] Fit fullrun_mos2_xmm0013140201_pi300-10000_cl_pass0_src1 appears to have run properly
[Sat Jun 16 20:28:56 2012] fullrun_mos2_xmm0013140201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 16 20:28:56 2012] fullrun_mos2_xmm0013140201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 16 20:28:56 2012] Fit fullrun_mos2_xmm0013140201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun 16 20:29:05 2012] Spatial fit model total counts = 51753.000000, observed total counts = 50589.000000
[Sat Jun 16 20:29:05 2012] Offset between fit and detection position for source 1 = 0.073595 pixels
[Sat Jun 16 20:29:05 2012] 51609.800000 total counts/ 11457.100000 bgd. counts: snr = 375.126204
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.073595 pixels
  Position = (293.9, 275.1) = 14 13 15.03 -3 12 28.5
  Extent = 6.0 (6.0-6.1)", rotation angle = 0
  Source counts = 40152.7 +/- 227.2
  Background counts = 11457.1
  Rate = 3 +/- 0.02
[Sat Jun 16 20:29:05 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 20:29:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 20:29:05 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 20:29:05 2012] Source does appear to be extended
[Sat Jun 16 20:29:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 20:42:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 16 20:42:03 2012] Initial guess for spatial extent in simple fitting = 6.03"
[Sat Jun 16 20:42:03 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.125
[Sat Jun 16 20:42:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.03"
[Sat Jun 16 21:14:24 2012] fullrun_mos2_xmm0013140201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 16 21:14:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013140201_pi300-10000_cl_pass1_src1.csv
[Sat Jun 16 21:14:24 2012] fullrun_mos2_xmm0013140201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 16 21:14:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013140201_pi300-10000_cl_pass1_src1.csv
[Sat Jun 16 21:14:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0013140201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0013140201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 21:14:25 2012] fullrun_mos2_xmm0013140201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 16 21:14:25 2012] fullrun_mos2_xmm0013140201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 16 21:14:25 2012] Fit fullrun_mos2_xmm0013140201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun 16 21:14:28 2012] Spatial fit model total counts = 50586.300000, observed total counts = 50589.000000
[Sat Jun 16 21:14:28 2012] Offset between fit and detection position for source 1 = 0.240606 pixels
[Sat Jun 16 21:14:28 2012] 51194.020000 total counts/ 5912.120000 bgd. counts: snr = 588.915549
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.240606 pixels
  Position = (293.8, 274.9) = 14 13 15.05 -3 12 29.5
  Extent = 7.0 (7.0-7.0)", rotation angle = 0
  Source counts = 45281.9 +/- 226.3
  Background counts = 5912.1
  Rate = 3 +/- 0.02
[Sat Jun 16 21:14:28 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 21:14:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 21:14:28 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 21:14:28 2012] Source does appear to be extended
[Sat Jun 16 21:14:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 21:57:55 2012] Counts = 45281.900000, rescaling region sizes by 3.000000
[Sat Jun 16 21:57:55 2012] XMMSAS src. selection expression = ellipse(25511.836400, 23867.684200, 1264.530636, 1264.530636, 0.000000, X, Y)
[Sat Jun 16 21:57:55 2012] Writing source region out to fullrun_mos2_xmm0013140201_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun 16 21:57:55 2012] Extracting stamp from image fullrun_mos2_xmm0013140201_pi300-10000_cl_sm2.00.img.gz, (221, 202) - (366, 348)
[Sat Jun 16 21:57:55 2012] XMMSAS bgd. selection expression = annulus(25511.836400, 23867.684200, 6322.653182, 12645.306364, X, Y) && !ellipse(24520.989777, 24112.407318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25033.405121, 22988.891846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24524.921875, 23688.494720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23812.675751, 24214.132111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23542.244000, 25118.588000, 1212.192035, 1212.192035, 0.000000, X, Y)
[Sat Jun 16 21:57:55 2012] Writing fullrun_mos2_xmm0013140201_pi300-10000_pass1_cl_src1.gif
[Sat Jun 16 21:58:00 2012] Mean detx,y = (16.78, 60.35) 
[Sat Jun 16 21:58:01 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 16 22:01:38 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 16 22:01:38 2012] Setting source spectrum file to fullrun_mos2_xmm0013140201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 16 22:01:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0013140201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun 16 22:15:52 2012] Updating aperture counts using extracted products
[Sat Jun 16 22:15:52 2012] Error reading totcts from fullrun_mos2_xmm0013140201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 16 22:15:52 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 22:15:52 2012] Using photon index=1.80, rate=3.42, arf fullrun_mos2_xmm0013140201_pi300-10000_pass1_cl_src1.arf
[Sat Jun 16 22:15:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 22:15:52 2012] Updating source flux to 3.4e-11
[Sat Jun 16 22:16:47 2012] Reading fit data from xmm0013140201/analysis//spectral/fullrun_mos2_xmm0013140201_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jun 16 22:16:47 2012] Spectral fit parameter nH value = 2.62021e+22
[Sat Jun 16 22:16:47 2012] Spectral fit parameter PhoIndex value = 1.59225
[Sat Jun 16 22:16:47 2012] Failed to get F(0.3-8.0) from xmm0013140201/analysis//spectral/fullrun_mos2_xmm0013140201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jun 16 22:16:47 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 22:16:47 2012] Using Nh = 2.6e+22, photon index=1.59, rate=3.42, arf fullrun_mos2_xmm0013140201_pi300-10000_pass1_cl_src1.arf
[Sat Jun 16 22:16:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 22:16:47 2012] Updating source flux to 7.9e-11