[Wed May 29 00:59:29 2013] Detection parameters: Position = (353.7, 381.0) = 14 12 56.92 -3 4 46.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 65.5 +/- 11.2 Background counts = 20.0 Rate = 0.004 +/- 0.0008 [Wed May 29 00:59:30 2013] Off-axis axis estimate = 7.20' [Wed May 29 01:02:31 2013] Using EEF radius (= 10.03 ")to estimate initial spatial extent for simple fitting [Wed May 29 01:02:31 2013] Initial guess for spatial extent in simple fitting = 10.03" [Wed May 29 01:02:31 2013] source mask rpix=2.3, npix_max = 31, mask sum = 33, frac = 1.048 [Wed May 29 01:02:31 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 10.03" [Wed May 29 01:39:11 2013] fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_src5.ximg exists [Wed May 29 01:39:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_src5.csv [Wed May 29 01:39:11 2013] fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_src5_1.ximg exists [Wed May 29 01:39:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_src5.csv [Wed May 29 01:39:11 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_src5_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 29 01:39:11 2013] fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists [Wed May 29 01:39:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src5.csv [Wed May 29 01:39:11 2013] fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists [Wed May 29 01:39:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src5.csv [Wed May 29 01:39:11 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 29 03:10:01 2013] Spatial fit model total counts = 226.770000, observed total counts = 172.000000 [Wed May 29 03:10:01 2013] Poor agreement between spatial fit and data for source 6 It may help to tweak spatial fit manually Not incorporating fit results [Wed May 29 03:10:01 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 10.044380 pixels away [Wed May 29 03:10:01 2013] Vigneting correction estimate = 1.000000 [Wed May 29 03:10:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 29 03:10:01 2013] Assessing source extent using major [Wed May 29 03:10:01 2013] Source does appear to be extended [Wed May 29 03:10:01 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 29 03:10:01 2013] Deleting source due to low Poisson probability 0.8