[Wed May 29 00:59:29 2013] Detection parameters: Position = (430.1, 310.9) = 14 12 34.73 -3 9 41.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 81.8 +/- 16.5 Background counts = 20.0 Rate = 0.006 +/- 0.001 [Wed May 29 00:59:30 2013] Off-axis axis estimate = 9.59' [Wed May 29 01:02:31 2013] Using EEF radius (= 11.22 ")to estimate initial spatial extent for simple fitting [Wed May 29 01:02:31 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed May 29 01:02:31 2013] Initial guess for spatial extent in simple fitting = 11.22" [Wed May 29 01:02:31 2013] source mask rpix=2.6, npix_max = 37, mask sum = 29, frac = 0.764 [Wed May 29 01:02:31 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 11.22" [Wed May 29 01:39:11 2013] fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_src2.ximg exists [Wed May 29 01:39:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_src2.csv [Wed May 29 01:39:11 2013] fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_src2_1.ximg exists [Wed May 29 01:39:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_src2.csv [Wed May 29 01:39:11 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 29 01:39:11 2013] fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Wed May 29 01:39:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src2.csv [Wed May 29 01:39:11 2013] fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Wed May 29 01:39:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src2.csv [Wed May 29 01:39:11 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 29 03:10:01 2013] Warning, spatial fit 2 centroid is now closest to src. 4 [Wed May 29 03:10:01 2013] Source 2 is offset by -7.125520 and -0.865691 pixels which is larger than 2 X fitted extent = 1.283683 x 1.283683, not incorporating fit results [Wed May 29 03:10:01 2013] Vigneting correction estimate = 1.000000 [Wed May 29 03:10:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 29 03:10:01 2013] Assessing source extent using major [Wed May 29 03:10:01 2013] Source does appear to be extended [Wed May 29 03:10:01 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 29 03:10:01 2013] Deleting source due to low Poisson probability 0.9