[Wed May 29 00:59:30 2013] Detection parameters: Position = (187.8, 325.0) = 14 13 45.10 -3 8 48.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 100.3 +/- 12.6 Background counts = 20.0 Rate = 0.007 +/- 0.0009 [Wed May 29 00:59:30 2013] Off-axis axis estimate = 8.25' [Wed May 29 01:02:31 2013] Using EEF radius (= 10.55 ")to estimate initial spatial extent for simple fitting [Wed May 29 01:02:31 2013] Initial guess for spatial extent in simple fitting = 10.55" [Wed May 29 01:02:31 2013] source mask rpix=2.4, npix_max = 34, mask sum = 29, frac = 0.847 [Wed May 29 01:02:31 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 10.55" [Wed May 29 01:39:11 2013] fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_src10.ximg exists [Wed May 29 01:39:11 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_src10.csv [Wed May 29 01:39:11 2013] fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_src10_1.ximg exists [Wed May 29 01:39:11 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_src10.csv [Wed May 29 01:39:11 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_src10_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 29 01:39:11 2013] fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists [Wed May 29 01:39:11 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src10.csv [Wed May 29 01:39:11 2013] fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists [Wed May 29 01:39:11 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src10.csv [Wed May 29 01:39:11 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 29 03:10:01 2013] Spatial fit model total counts = 338.110000, observed total counts = 273.000000 [Wed May 29 03:10:01 2013] Poor agreement between spatial fit and data for source 11 It may help to tweak spatial fit manually Not incorporating fit results [Wed May 29 03:10:01 2013] Warning, spatial fit 10 centroid is now closest to src. 10 [Wed May 29 03:10:01 2013] Vigneting correction estimate = 1.000000 [Wed May 29 03:10:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 29 03:10:01 2013] Assessing source extent using major [Wed May 29 03:10:01 2013] Source does appear to be extended [Wed May 29 03:10:01 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 29 03:10:01 2013] Deleting source due to low Poisson probability 0.9