[Wed May 29 01:00:22 2013] Detection parameters:
  Position = (245.0, 350.7) = 14 13 28.51 -3 6 58.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.0 +/- 7.1
  Background counts = 7.1
  Rate = 0.002 +/- 0.0005

[Wed May 29 01:00:23 2013] Off-axis axis estimate = 5.42'
[Wed May 29 02:10:49 2013] Using EEF radius (= 9.14 ")to estimate initial spatial extent for simple fitting
[Wed May 29 02:10:49 2013] Initial guess for spatial extent in simple fitting = 9.14"
[Wed May 29 02:10:49 2013] source mask rpix=2.1, npix_max = 27, mask sum = 28, frac = 1.035
[Wed May 29 02:10:49 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 9.14"
[Wed May 29 03:09:54 2013] fullrun_mos2_xmm0013140101_pi300-10000_cl_pass0_src17.ximg exists
[Wed May 29 03:09:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013140101_pi300-10000_cl_pass0_src17.csv
[Wed May 29 03:09:54 2013] fullrun_mos2_xmm0013140101_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed May 29 03:09:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013140101_pi300-10000_cl_pass0_src17.csv
[Wed May 29 03:09:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0013140101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0013140101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 03:09:55 2013] fullrun_mos2_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed May 29 03:09:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed May 29 03:09:55 2013] fullrun_mos2_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed May 29 03:09:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed May 29 03:09:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 03:10:08 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 10.907682 pixels away
[Wed May 29 03:10:08 2013] Vigneting correction estimate = 1.000000
[Wed May 29 03:10:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 03:10:08 2013] Assessing source extent using major
[Wed May 29 03:10:08 2013] Source does appear to be extended
[Wed May 29 03:10:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 03:10:08 2013] Deleting source due to low Poisson probability 0.8