[Wed May 29 01:00:23 2013] Detection parameters:
  Position = (281.3, 262.3) = 14 13 17.95 -3 13 27.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.1 +/- 13.3
  Background counts = 12.2
  Rate = 0.003 +/- 0.0008

[Wed May 29 01:00:23 2013] Off-axis axis estimate = 2.90'
[Wed May 29 02:10:49 2013] Using EEF radius (= 7.88 ")to estimate initial spatial extent for simple fitting
[Wed May 29 02:10:49 2013] Initial guess for spatial extent in simple fitting = 7.88"
[Wed May 29 02:10:49 2013] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.170
[Wed May 29 02:10:49 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 7.88"
[Wed May 29 03:09:54 2013] fullrun_mos2_xmm0013140101_pi300-10000_cl_pass0_src11.ximg exists
[Wed May 29 03:09:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013140101_pi300-10000_cl_pass0_src11.csv
[Wed May 29 03:09:54 2013] fullrun_mos2_xmm0013140101_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed May 29 03:09:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013140101_pi300-10000_cl_pass0_src11.csv
[Wed May 29 03:09:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0013140101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0013140101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 03:09:55 2013] fullrun_mos2_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed May 29 03:09:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed May 29 03:09:55 2013] fullrun_mos2_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed May 29 03:09:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed May 29 03:09:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0013140101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 03:10:08 2013] Spatial fit model total counts = 603.162000, observed total counts = 776.000000
[Wed May 29 03:10:08 2013] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 03:10:08 2013] Vigneting correction estimate = 1.000000
[Wed May 29 03:10:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 03:10:08 2013] Assessing source extent using major
[Wed May 29 03:10:08 2013] Source does appear to be extended
[Wed May 29 03:10:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 03:10:08 2013] Deleting source due to low Poisson probability 0.9