[Sat Jul 21 01:52:28 2012] Detection parameters:
  Position = (232.5, 472.7) = 7 21 53.40 71 20 38.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 14091.8 +/- 141.8
  Background counts = 4.8
  Rate = 2 +/- 0.02

[Sat Jul 21 01:52:28 2012] Off-axis axis estimate = 13.51'
[Sat Jul 21 03:45:55 2012] Using EEF radius (= 13.18 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 03:45:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 21 03:45:55 2012] Initial guess for spatial extent in simple fitting = 13.18"
[Sat Jul 21 03:45:55 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.983
[Sat Jul 21 03:45:55 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.18"
[Sat Jul 21 04:38:59 2012] fullrun_mos2_xmm0012850701_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 21 04:38:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0012850701_pi300-10000_cl_pass0_src1.csv
[Sat Jul 21 04:38:59 2012] fullrun_mos2_xmm0012850701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 21 04:38:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0012850701_pi300-10000_cl_pass0_src1.csv
[Sat Jul 21 04:38:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0012850701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0012850701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 04:38:59 2012] fullrun_mos2_xmm0012850701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 21 04:38:59 2012] fullrun_mos2_xmm0012850701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 21 04:38:59 2012] Fit fullrun_mos2_xmm0012850701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul 21 04:39:12 2012] Spatial fit model total counts = 13133.600000, observed total counts = 13175.000000
[Sat Jul 21 04:39:12 2012] Offset between fit and detection position for source 4 = 0.343799 pixels
[Sat Jul 21 04:39:12 2012] 13118.130000 total counts/ 1760.830000 bgd. counts: snr = 270.655205
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.343799 pixels
  Position = (232.5, 472.4) = 7 21 53.37 71 20 36.5
  Extent = 9.5 (9.5-9.5)", rotation angle = 0
  Source counts = 11357.3 +/- 114.5
  Background counts = 1760.8
  Rate = 1 +/- 0.01
[Sat Jul 21 04:39:12 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 04:39:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 04:39:12 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 04:39:12 2012] Source does appear to be extended
[Sat Jul 21 04:39:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 05:57:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 21 05:57:17 2012] Initial guess for spatial extent in simple fitting = 9.50"
[Sat Jul 21 05:57:17 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.867
[Sat Jul 21 05:57:17 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.50"
[Sat Jul 21 06:43:42 2012] fullrun_mos2_xmm0012850701_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 21 06:43:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0012850701_pi300-10000_cl_pass1_src1.csv
[Sat Jul 21 06:43:42 2012] fullrun_mos2_xmm0012850701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 21 06:43:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0012850701_pi300-10000_cl_pass1_src1.csv
[Sat Jul 21 06:43:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0012850701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0012850701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 06:43:42 2012] fullrun_mos2_xmm0012850701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 21 06:43:42 2012] fullrun_mos2_xmm0012850701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 21 06:43:42 2012] Fit fullrun_mos2_xmm0012850701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 21 06:43:53 2012] Spatial fit model total counts = 12622.900000, observed total counts = 12668.000000
[Sat Jul 21 06:43:53 2012] Offset between fit and detection position for source 4 = 0.018449 pixels
[Sat Jul 21 06:43:53 2012] 12598.330000 total counts/ 1633.330000 bgd. counts: snr = 271.313664
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.018449 pixels
  Position = (232.5, 472.4) = 7 21 53.37 71 20 36.6
  Extent = 9.1 (9.1-9.1)", rotation angle = 0
  Source counts = 10965.0 +/- 112.2
  Background counts = 1633.3
  Rate = 1 +/- 0.01
[Sat Jul 21 06:43:54 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 06:43:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 06:43:54 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 06:43:54 2012] Source does appear to be extended
[Sat Jul 21 06:43:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 06:43:54 2012] Source is confused with source 5
[Sat Jul 21 07:21:18 2012] Counts = 10965.000000, rescaling region sizes by 3.000000
[Sat Jul 21 07:21:18 2012] XMMSAS src. selection expression = ellipse(20182.645800, 41050.746200, 1639.857647, 1639.857647, 0.000000, X, Y)
[Sat Jul 21 07:21:18 2012] Writing source region out to fullrun_mos2_xmm0012850701_pi300-10000_pass1_cl_src4_src.reg
[Sat Jul 21 07:21:18 2012] Extracting stamp from image fullrun_mos2_xmm0012850701_pi300-10000_cl_sm2.00.img.gz, (138, 378) - (327, 567)
[Sat Jul 21 07:21:18 2012] XMMSAS bgd. selection expression = annulus(20182.645800, 41050.746200, 8199.288236, 16398.576472, X, Y) && !ellipse(21809.102000, 32373.037800, 403.284812, 403.284812, 0.000000, X, Y) && !ellipse(29460.359640, 33291.505000, 385.777611, 235.156007, 317.511464, X, Y) && !ellipse(19497.079800, 32180.755200, 432.905612, 432.905612, 0.000000, X, Y) && !ellipse(30925.285600, 34602.524400, 582.917617, 582.917617, 0.000000, X, Y) && !ellipse(21435.702362, 41689.688934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23176.450200, 27794.328400, 350.784442, 350.784442, 0.000000, X, Y) && !ellipse(19154.530000, 40413.550000, 2508.464072, 2508.464072, 0.000000, X, Y) && !ellipse(26066.609800, 26948.802000, 1123.040032, 1123.040032, 0.000000, X, Y) && !ellipse(17566.610000, 39946.682000, 1870.088054, 1870.088054, 0.000000, X, Y) && !ellipse(25374.974640, 27108.424683, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 21 07:21:18 2012] Writing fullrun_mos2_xmm0012850701_pi300-10000_pass1_cl_src4.gif
[Sat Jul 21 07:21:20 2012] Mean detx,y = (2874.63, 14460.81) 
[Sat Jul 21 07:21:21 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 07:24:51 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 07:24:52 2012] Setting source spectrum file to fullrun_mos2_xmm0012850701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jul 21 07:24:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0012850701_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Jul 21 07:43:23 2012] Updating aperture counts using extracted products
[Sat Jul 21 07:43:23 2012] Error reading totcts from fullrun_mos2_xmm0012850701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jul 21 07:43:23 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 07:43:23 2012] Using photon index=1.80, rate=1.23, arf fullrun_mos2_xmm0012850701_pi300-10000_pass1_cl_src4.arf
[Sat Jul 21 07:43:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 07:43:23 2012] Updating source flux to 2.9e-11
[Sat Jul 21 07:43:40 2012] Flag c found in src. 4 procflags, skipping spectral fitting
[Sat Jul 21 07:44:10 2012] Reading fit data from xmm0012850701/analysis//spectral/fullrun_mos2_xmm0012850701_pi300-10000_pass1_cl_src4_pl.csv
[Sat Jul 21 07:44:10 2012] Spectral fit parameter nH value = 5.33826e+20
[Sat Jul 21 07:44:10 2012] Spectral fit parameter PhoIndex value = 2.71996
[Sat Jul 21 07:44:10 2012] Failed to get F(0.3-8.0) from xmm0012850701/analysis//spectral/fullrun_mos2_xmm0012850701_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Sat Jul 21 07:44:10 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 07:44:10 2012] Using Nh = 5.3e+20, photon index=2.72, rate=1.23, arf fullrun_mos2_xmm0012850701_pi300-10000_pass1_cl_src4.arf
[Sat Jul 21 07:44:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 07:44:10 2012] Updating source flux to 2.2e-11