[Sat Jul 21 01:52:28 2012] Detection parameters:
  Position = (300.3, 246.6) = 7 20 51.97 71 4 15.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22.0 +/- 6.1
  Background counts = 2.9
  Rate = 0.003 +/- 0.0008

[Sat Jul 21 01:52:28 2012] Off-axis axis estimate = 3.76'
[Sat Jul 21 03:45:55 2012] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 03:45:55 2012] Initial guess for spatial extent in simple fitting = 8.31"
[Sat Jul 21 03:45:55 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.076
[Sat Jul 21 03:45:55 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 8.31"
[Sat Jul 21 04:38:59 2012] fullrun_mos2_xmm0012850701_pi300-10000_cl_pass0_src16.ximg exists
[Sat Jul 21 04:38:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0012850701_pi300-10000_cl_pass0_src16.csv
[Sat Jul 21 04:38:59 2012] fullrun_mos2_xmm0012850701_pi300-10000_cl_pass0_src16_1.ximg exists
[Sat Jul 21 04:38:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0012850701_pi300-10000_cl_pass0_src16.csv
[Sat Jul 21 04:38:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0012850701_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0012850701_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 04:38:59 2012] fullrun_mos2_xmm0012850701_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sat Jul 21 04:38:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0012850701_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sat Jul 21 04:38:59 2012] fullrun_mos2_xmm0012850701_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sat Jul 21 04:38:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0012850701_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sat Jul 21 04:38:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0012850701_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0012850701_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 04:39:12 2012] Spatial fit model total counts = 34.777300, observed total counts = 40.000000
[Sat Jul 21 04:39:12 2012] Offset between fit and detection position for source 20 = 0.596422 pixels
[Sat Jul 21 04:39:12 2012] 35.722800 total counts/ 15.130700 bgd. counts: snr = 5.293844
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.596422 pixels
  Position = (300.9, 246.4) = 7 20 51.47 71 4 14.0
  Extent = 6.7 (2.7-10.2)", rotation angle = 0
  Source counts = 20.6 +/- 6.0
  Background counts = 15.1
  Rate = 0.002 +/- 0.0007
[Sat Jul 21 04:39:12 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 04:39:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 04:39:12 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 04:39:12 2012] Source does appear to be extended
[Sat Jul 21 04:39:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 04:39:12 2012] Deleting source due to low Poisson probability 0.9