[Sat Jul 21 01:52:13 2012] Detection parameters:
  Position = (232.6, 472.0) = 7 21 53.33 71 20 37.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 13320.2 +/- 141.3
  Background counts = 4.9
  Rate = 1 +/- 0.02

[Sat Jul 21 01:52:13 2012] Off-axis axis estimate = 13.46'
[Sat Jul 21 03:27:23 2012] Using EEF radius (= 13.16 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 03:27:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 21 03:27:23 2012] Initial guess for spatial extent in simple fitting = 13.16"
[Sat Jul 21 03:27:23 2012] source mask rpix=3.0, npix_max = 49, mask sum = 45, frac = 0.905
[Sat Jul 21 03:27:23 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.16"
[Sat Jul 21 03:45:55 2012] fullrun_mos1_xmm0012850701_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 21 03:45:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0012850701_pi300-10000_cl_pass0_src1.csv
[Sat Jul 21 03:45:55 2012] fullrun_mos1_xmm0012850701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 21 03:45:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0012850701_pi300-10000_cl_pass0_src1.csv
[Sat Jul 21 03:45:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0012850701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0012850701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 03:45:55 2012] fullrun_mos1_xmm0012850701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 21 03:45:55 2012] fullrun_mos1_xmm0012850701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 21 03:45:55 2012] Fit fullrun_mos1_xmm0012850701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul 21 04:39:08 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 16.854045 pixels away
[Sat Jul 21 04:39:08 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 04:39:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 04:39:08 2012] Assessing source extent using major
[Sat Jul 21 04:39:08 2012] Source does appear to be extended
[Sat Jul 21 04:39:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 05:34:06 2012] Using EEF radius (= 13.16 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 05:34:06 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 21 05:34:06 2012] Initial guess for spatial extent in simple fitting = 13.16"
[Sat Jul 21 05:34:06 2012] source mask rpix=3.0, npix_max = 49, mask sum = 45, frac = 0.905
[Sat Jul 21 05:34:06 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.16"
[Sat Jul 21 05:57:16 2012] fullrun_mos1_xmm0012850701_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 21 05:57:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0012850701_pi300-10000_cl_pass1_src1.csv
[Sat Jul 21 05:57:16 2012] fullrun_mos1_xmm0012850701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 21 05:57:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0012850701_pi300-10000_cl_pass1_src1.csv
[Sat Jul 21 05:57:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0012850701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0012850701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 05:57:16 2012] fullrun_mos1_xmm0012850701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 21 05:57:16 2012] fullrun_mos1_xmm0012850701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 21 05:57:16 2012] Fit fullrun_mos1_xmm0012850701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 21 06:43:51 2012] Spatial fit model total counts = 13025.200000, observed total counts = 12693.000000
[Sat Jul 21 06:43:51 2012] Offset between fit and detection position for source 4 = 0.277114 pixels
[Sat Jul 21 06:43:51 2012] 13031.150000 total counts/ 2003.250000 bgd. counts: snr = 246.391229
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.277114 pixels
  Position = (232.6, 472.3) = 7 21 53.34 71 20 36.2
  Extent = 9.6 (9.6-9.6)", rotation angle = 0
  Source counts = 11027.9 +/- 114.2
  Background counts = 2003.2
  Rate = 1 +/- 0.01
[Sat Jul 21 06:43:51 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 06:43:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 06:43:51 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 06:43:51 2012] Source does appear to be extended
[Sat Jul 21 06:43:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 07:08:54 2012] Counts = 11027.900000, rescaling region sizes by 3.000000
[Sat Jul 21 07:08:54 2012] XMMSAS src. selection expression = ellipse(20184.752140, 41043.680480, 1728.714592, 1728.714592, 0.000000, X, Y)
[Sat Jul 21 07:08:54 2012] Writing source region out to fullrun_mos1_xmm0012850701_pi300-10000_pass1_cl_src4_src.reg
[Sat Jul 21 07:08:54 2012] Extracting stamp from image fullrun_mos1_xmm0012850701_pi300-10000_cl_sm2.00.img.gz, (133, 373) - (332, 572)
[Sat Jul 21 07:08:54 2012] XMMSAS bgd. selection expression = annulus(20184.752140, 41043.680480, 8643.572961, 17287.145921, X, Y) && !ellipse(21824.624400, 32365.540200, 406.860012, 406.860012, 0.000000, X, Y) && !ellipse(30923.917180, 34662.689200, 552.896016, 552.896016, 0.000000, X, Y) && !ellipse(29468.741400, 33291.037600, 405.622412, 405.622412, 0.000000, X, Y) && !ellipse(19506.899246, 32174.146240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23183.706040, 27807.507400, 332.325610, 332.325610, 0.000000, X, Y) && !ellipse(28061.335938, 30988.747345, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 21 07:08:54 2012] Writing fullrun_mos1_xmm0012850701_pi300-10000_pass1_cl_src4.gif
[Sat Jul 21 07:08:57 2012] Mean detx,y = (14693.75, -2961.30) 
[Sat Jul 21 07:08:58 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 07:12:25 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 07:12:25 2012] Setting source spectrum file to fullrun_mos1_xmm0012850701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jul 21 07:12:25 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0012850701_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Jul 21 07:43:23 2012] Updating aperture counts using extracted products
[Sat Jul 21 07:43:23 2012] Error reading totcts from fullrun_mos1_xmm0012850701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jul 21 07:43:23 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 07:43:23 2012] Using photon index=1.80, rate=1.24, arf fullrun_mos1_xmm0012850701_pi300-10000_pass1_cl_src4.arf
[Sat Jul 21 07:43:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 07:43:23 2012] Updating source flux to 2.8e-11
[Sat Jul 21 07:43:40 2012] Reading fit data from xmm0012850701/analysis//spectral/fullrun_mos1_xmm0012850701_pi300-10000_pass1_cl_src4_pl.csv
[Sat Jul 21 07:43:40 2012] Spectral fit parameter nH value = 2.65227e+20
[Sat Jul 21 07:43:40 2012] Spectral fit parameter PhoIndex value = 2.71123
[Sat Jul 21 07:43:40 2012] Failed to get F(0.3-8.0) from xmm0012850701/analysis//spectral/fullrun_mos1_xmm0012850701_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Sat Jul 21 07:43:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 07:43:40 2012] Using Nh = 2.7e+20, photon index=2.71, rate=1.24, arf fullrun_mos1_xmm0012850701_pi300-10000_pass1_cl_src4.arf
[Sat Jul 21 07:43:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 07:43:40 2012] Updating source flux to 2.1e-11