[Fri Jun 22 07:22:39 2012] Detection parameters:
  Position = (236.2, 470.8) = 7 21 53.44 71 20 37.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1116.6 +/- 39.9
  Background counts = 3.9
  Rate = 0.3 +/- 0.01

[Fri Jun 22 07:22:39 2012] Off-axis axis estimate = 13.29'
[Fri Jun 22 07:23:42 2012] Using EEF radius (= 13.07 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 07:23:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 22 07:23:42 2012] Initial guess for spatial extent in simple fitting = 13.07"
[Fri Jun 22 07:23:42 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.997
[Fri Jun 22 07:23:42 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 13.07"
[Fri Jun 22 07:30:27 2012] fullrun_pn_xmm0012850101_pi300-10000_cl_pass0_src5.ximg exists
[Fri Jun 22 07:30:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0012850101_pi300-10000_cl_pass0_src5.csv
[Fri Jun 22 07:30:27 2012] fullrun_pn_xmm0012850101_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Jun 22 07:30:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0012850101_pi300-10000_cl_pass0_src5.csv
[Fri Jun 22 07:30:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0012850101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0012850101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 07:30:27 2012] fullrun_pn_xmm0012850101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Jun 22 07:30:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0012850101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Jun 22 07:30:27 2012] fullrun_pn_xmm0012850101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Jun 22 07:30:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0012850101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Jun 22 07:30:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0012850101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0012850101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 07:40:30 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 17.066656 pixels away
[Fri Jun 22 07:40:30 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 07:40:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 07:40:30 2012] Assessing source extent using major
[Fri Jun 22 07:40:30 2012] Source does appear to be extended
[Fri Jun 22 07:40:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 07:40:35 2012] Using EEF radius (= 13.07 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 07:40:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 22 07:40:35 2012] Initial guess for spatial extent in simple fitting = 13.07"
[Fri Jun 22 07:40:35 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.997
[Fri Jun 22 07:40:35 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 13.07"
[Fri Jun 22 07:48:37 2012] fullrun_pn_xmm0012850101_pi300-10000_cl_pass1_src5.ximg exists
[Fri Jun 22 07:48:37 2012] fullrun_pn_xmm0012850101_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Jun 22 07:48:37 2012] Fit fullrun_pn_xmm0012850101_pi300-10000_cl_pass1_src5 appears to have run properly
[Fri Jun 22 07:48:37 2012] fullrun_pn_xmm0012850101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Jun 22 07:48:37 2012] fullrun_pn_xmm0012850101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Jun 22 07:48:37 2012] Fit fullrun_pn_xmm0012850101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Jun 22 07:58:56 2012] Spatial fit model total counts = 1018.620000, observed total counts = 1000.000000
[Fri Jun 22 07:58:56 2012] Offset between fit and detection position for source 5 = 0.183362 pixels
[Fri Jun 22 07:58:56 2012] 1019.108000 total counts/ 228.973000 bgd. counts: snr = 52.216669
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.183362 pixels
  Position = (236.3, 470.7) = 7 21 53.43 71 20 35.9
  Extent = 10.6 (9.8-11.4)" x 4.8 (4.4-5.2)", rotation angle = 330 (327-334) degrees
  Source counts = 790.1 +/- 31.9
  Background counts = 229.0
  Rate = 0.7 +/- 0.03
[Fri Jun 22 07:58:56 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 07:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 07:58:56 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 07:58:56 2012] Source does appear to be extended
[Fri Jun 22 07:58:56 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.88
[Fri Jun 22 07:58:56 2012] Source is asymmetric
[Fri Jun 22 07:59:01 2012] XMMSAS src. selection expression = ellipse(20505.263200, 40898.996000, 634.800018, 288.629408, 330.417568, X, Y)
[Fri Jun 22 07:59:01 2012] Writing source region out to fullrun_pn_xmm0012850101_pi300-10000_pass1_cl_src5_src.reg
[Fri Jun 22 07:59:01 2012] Extracting stamp from image fullrun_pn_xmm0012850101_pi300-10000_cl_sm2.00.img.gz, (200, 434) - (273, 507)
[Fri Jun 22 07:59:01 2012] XMMSAS bgd. selection expression = annulus(20505.263200, 40898.996000, 1058.000030, 2116.000061, X, Y)
[Fri Jun 22 07:59:01 2012] Writing fullrun_pn_xmm0012850101_pi300-10000_pass1_cl_src5.gif
[Fri Jun 22 08:00:24 2012] Mean detx,y = (-5106.10, -13937.92) 
[Fri Jun 22 08:00:26 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 08:00:43 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 08:00:44 2012] Setting source spectrum file to fullrun_pn_xmm0012850101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun 22 08:00:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0012850101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jun 22 08:12:31 2012] Updating aperture counts using extracted products
[Fri Jun 22 08:12:31 2012] Error reading totcts from fullrun_pn_xmm0012850101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun 22 08:12:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 08:12:31 2012] Using photon index=1.80, rate=0.726, arf fullrun_pn_xmm0012850101_pi300-10000_pass1_cl_src5.arf
[Fri Jun 22 08:12:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 08:12:31 2012] Updating source flux to 6.4e-12
[Fri Jun 22 08:12:53 2012] Reading fit data from xmm0012850101/analysis//spectral/fullrun_pn_xmm0012850101_pi300-10000_pass1_cl_src5_pl.csv
[Fri Jun 22 08:12:53 2012] Spectral fit parameter nH value = 5.61788e+13
[Fri Jun 22 08:12:53 2012] Spectral fit parameter PhoIndex value = 2.54828
[Fri Jun 22 08:12:53 2012] Failed to get F(0.3-8.0) from xmm0012850101/analysis//spectral/fullrun_pn_xmm0012850101_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Fri Jun 22 08:12:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 08:12:53 2012] Using Nh = 5.6e+13, photon index=2.55, rate=0.726, arf fullrun_pn_xmm0012850101_pi300-10000_pass1_cl_src5.arf
[Fri Jun 22 08:12:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 08:12:54 2012] Updating source flux to 4.2e-12