[Fri Jun 22 07:22:39 2012] Detection parameters:
  Position = (254.9, 370.9) = 7 21 36.26 71 13 22.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.2 +/- 10.9
  Background counts = 3.9
  Rate = 0.02 +/- 0.003

[Fri Jun 22 07:22:39 2012] Off-axis axis estimate = 6.13'
[Fri Jun 22 07:23:42 2012] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 07:23:42 2012] Initial guess for spatial extent in simple fitting = 9.49"
[Fri Jun 22 07:23:42 2012] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.251
[Fri Jun 22 07:23:42 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.49"
[Fri Jun 22 07:30:27 2012] fullrun_pn_xmm0012850101_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jun 22 07:30:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0012850101_pi300-10000_cl_pass0_src2.csv
[Fri Jun 22 07:30:27 2012] fullrun_pn_xmm0012850101_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jun 22 07:30:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0012850101_pi300-10000_cl_pass0_src2.csv
[Fri Jun 22 07:30:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0012850101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0012850101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 07:30:27 2012] fullrun_pn_xmm0012850101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jun 22 07:30:27 2012] fullrun_pn_xmm0012850101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jun 22 07:30:27 2012] Fit fullrun_pn_xmm0012850101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Jun 22 07:40:30 2012] Spatial fit model total counts = 86.100900, observed total counts = 87.000000
[Fri Jun 22 07:40:30 2012] Offset between fit and detection position for source 2 = 0.021867 pixels
[Fri Jun 22 07:40:30 2012] 85.776100 total counts/ 35.580900 bgd. counts: snr = 8.414992
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.021867 pixels
  Position = (254.9, 370.9) = 7 21 36.28 71 13 22.4
  Extent = 4.7 (3.7-6.0)", rotation angle = 0
  Source counts = 50.2 +/- 9.3
  Background counts = 35.6
  Rate = 0.05 +/- 0.009
[Fri Jun 22 07:40:30 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 07:40:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 07:40:30 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 07:40:30 2012] Source does appear to be extended
[Fri Jun 22 07:40:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 07:40:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 22 07:40:35 2012] Initial guess for spatial extent in simple fitting = 4.73"
[Fri Jun 22 07:40:35 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.190
[Fri Jun 22 07:40:35 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 4.73"
[Fri Jun 22 07:48:37 2012] fullrun_pn_xmm0012850101_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jun 22 07:48:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0012850101_pi300-10000_cl_pass1_src2.csv
[Fri Jun 22 07:48:37 2012] fullrun_pn_xmm0012850101_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jun 22 07:48:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0012850101_pi300-10000_cl_pass1_src2.csv
[Fri Jun 22 07:48:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0012850101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0012850101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 07:48:37 2012] fullrun_pn_xmm0012850101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jun 22 07:48:37 2012] fullrun_pn_xmm0012850101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jun 22 07:48:37 2012] Fit fullrun_pn_xmm0012850101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Jun 22 07:58:56 2012] Warning, spatial fit 2 centroid is now closest to src. 3
[Fri Jun 22 07:58:56 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 07:58:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 07:58:56 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 07:58:56 2012] Source does appear to be extended
[Fri Jun 22 07:58:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 07:59:01 2012] XMMSAS src. selection expression = ellipse(22128.645600, 32223.410800, 283.891208, 283.891208, 0.000000, X, Y)
[Fri Jun 22 07:59:01 2012] Writing source region out to fullrun_pn_xmm0012850101_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun 22 07:59:01 2012] Extracting stamp from image fullrun_pn_xmm0012850101_pi300-10000_cl_sm2.00.img.gz, (239, 355) - (271, 387)
[Fri Jun 22 07:59:01 2012] XMMSAS bgd. selection expression = annulus(22128.645600, 32223.410800, 473.152014, 946.304027, X, Y)
[Fri Jun 22 07:59:01 2012] Writing fullrun_pn_xmm0012850101_pi300-10000_pass1_cl_src2.gif
[Fri Jun 22 07:59:22 2012] Mean detx,y = (-4261.69, -5144.91) 
[Fri Jun 22 07:59:24 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 07:59:35 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 07:59:35 2012] Setting source spectrum file to fullrun_pn_xmm0012850101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun 22 07:59:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0012850101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Jun 22 08:00:52 2012] Not generating rmf since there are only 50 counts
[Fri Jun 22 08:00:52 2012] rmf not generated due to insufficient counts
[Fri Jun 22 08:12:31 2012] Updating aperture counts using extracted products
[Fri Jun 22 08:12:31 2012] Error reading totcts from fullrun_pn_xmm0012850101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun 22 08:12:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 08:12:31 2012] Using photon index=1.80, rate=0.0461, arf fullrun_pn_xmm0012850101_pi300-10000_pass1_cl_src2.arf
[Fri Jun 22 08:12:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 08:12:31 2012] Updating source flux to 2.2e-13
[Fri Jun 22 08:12:45 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 22 08:12:53 2012] xmm0012850101/analysis//spectral/fullrun_pn_xmm0012850101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete