[Wed Apr 11 07:50:27 2012] Detection parameters:
  Position = (204.3, 187.9) = 3 38 54.55 -35 34 44.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.2 +/- 18.6
  Background counts = 72.3
  Rate = 0.004 +/- 0.0007

[Wed Apr 11 07:50:27 2012] Off-axis axis estimate = 10.53'
[Wed Apr 11 07:50:47 2012] Using EEF radius (= 11.69 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 07:50:47 2012] Initial guess for spatial extent in simple fitting = 11.69"
[Wed Apr 11 07:50:47 2012] source mask rpix=2.7, npix_max = 40, mask sum = 32, frac = 0.787
[Wed Apr 11 07:50:47 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 11.69"
[Wed Apr 11 07:50:47 2012] fullrun_mos2_xmm0012830101_pi300-10000_cl_pass0_src26.ximg exists
[Wed Apr 11 07:50:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0012830101_pi300-10000_cl_pass0_src26.csv
[Wed Apr 11 07:50:47 2012] fullrun_mos2_xmm0012830101_pi300-10000_cl_pass0_src26_1.ximg exists
[Wed Apr 11 07:50:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0012830101_pi300-10000_cl_pass0_src26.csv
[Wed Apr 11 07:50:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0012830101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0012830101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 07:50:48 2012] fullrun_mos2_xmm0012830101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Wed Apr 11 07:50:48 2012] fullrun_mos2_xmm0012830101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Wed Apr 11 07:50:48 2012] Fit fullrun_mos2_xmm0012830101_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Wed Apr 11 07:51:00 2012] Spatial fit model total counts = 772.682000, observed total counts = 766.000000
[Wed Apr 11 07:51:00 2012] Offset between fit and detection position for source 26 = 9.333482 pixels
[Wed Apr 11 07:51:00 2012] 741.195000 total counts/ 401.475000 bgd. counts: snr = 16.954768
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 9.333482 pixels
  Position = (197.9, 194.7) = 3 38 56.83 -35 34 15.6
  Extent = 23.4 (23.3-46.8)", rotation angle = 0
  Source counts = 339.7 +/- 27.2
  Background counts = 401.5
  Rate = 0.02 +/- 0.002
[Wed Apr 11 07:51:00 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 07:51:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 07:51:00 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 07:51:00 2012] Source does appear to be extended
[Wed Apr 11 07:51:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 07:51:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 07:51:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Apr 11 07:51:11 2012] Initial guess for spatial extent in simple fitting = 23.39"
[Wed Apr 11 07:51:11 2012] source mask rpix=5.4, npix_max = 138, mask sum = 143, frac = 1.035
[Wed Apr 11 07:51:11 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 23.39"
[Wed Apr 11 07:51:11 2012] fullrun_mos2_xmm0012830101_pi300-10000_cl_pass1_src19.ximg exists
[Wed Apr 11 07:51:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0012830101_pi300-10000_cl_pass1_src19.csv
[Wed Apr 11 07:51:11 2012] fullrun_mos2_xmm0012830101_pi300-10000_cl_pass1_src19_1.ximg exists
[Wed Apr 11 07:51:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0012830101_pi300-10000_cl_pass1_src19.csv
[Wed Apr 11 07:51:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0012830101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0012830101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 07:51:12 2012] fullrun_mos2_xmm0012830101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Wed Apr 11 07:51:12 2012] fullrun_mos2_xmm0012830101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Wed Apr 11 07:51:12 2012] Fit fullrun_mos2_xmm0012830101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Wed Apr 11 07:51:22 2012] Source 26 is offset by -2.516115 and 9.067816 pixels which is larger than
2 X fitted extent = 1.324621 x 1.324621, not incorporating fit results
[Wed Apr 11 07:51:22 2012] Warning, spatial fit 19 centroid is now closest to src. 19
[Wed Apr 11 07:51:22 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 07:51:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 07:51:22 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 07:51:22 2012] Source does appear to be extended
[Wed Apr 11 07:51:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 07:51:36 2012] XMMSAS src. selection expression = ellipse(17167.662000, 16887.336000, 1403.142040, 1403.142040, 0.000000, X, Y)
[Wed Apr 11 07:51:36 2012] Not overwriting source region fullrun_mos2_xmm0012830101_pi300-10000_pass1_cl_src26_src.reg
[Wed Apr 11 07:51:36 2012] Extracting stamp from image fullrun_mos2_xmm0012830101_pi300-10000_cl_sm2.00.img.gz, (117, 114) - (279, 275)
[Wed Apr 11 07:51:36 2012] XMMSAS bgd. selection expression = annulus(17167.662000, 16887.336000, 2338.570067, 4677.140135, X, Y) && !ellipse(18446.684000, 15180.414000, 1041.744030, 1041.744030, 0.000000, X, Y) && !ellipse(20961.366800, 20106.710000, 393.774411, 393.774411, 0.000000, X, Y) && !ellipse(19287.046890, 15621.149704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19229.350000, 16768.028000, 1837.656053, 1837.656053, 0.000000, X, Y) && !ellipse(18294.760223, 14163.451004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19766.117722, 14282.016647, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Apr 11 07:51:36 2012] Writing fullrun_mos2_xmm0012830101_pi300-10000_pass1_cl_src26.gif
[Wed Apr 11 07:51:36 2012] ../../xmm0012830101/products/events/fullrun_mos2_xmm0012830101_pi300-10000_pass1_cl_src26_src.evt and ../../xmm0012830101/products/events/fullrun_mos2_xmm0012830101_pi300-10000_pass1_cl_src26_bgd.evt exist, delete to re-create
[Wed Apr 11 07:51:37 2012] Mean detx,y = (2534.25, 10940.54) 
[Wed Apr 11 07:51:37 2012] ../../xmm0012830101/products/images/fullrun_mos2_xmm0012830101_pi300-10000_pass1_cl_src26_src.img and ../../xmm0012830101/products/images/fullrun_mos2_xmm0012830101_pi300-10000_pass1_cl_src26_bgd.img exist, delete to re-create
[Wed Apr 11 07:51:37 2012] ../../xmm0012830101/products/spectra/fullrun_mos2_xmm0012830101_pi300-10000_pass1_cl_src26_src_b10.pi.gz and ../../xmm0012830101/products/spectra/fullrun_mos2_xmm0012830101_pi300-10000_pass1_cl_src26_bgd.pi exist, delete to re-create
[Wed Apr 11 07:51:37 2012] Setting source spectrum file to fullrun_mos2_xmm0012830101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed Apr 11 07:51:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0012830101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Wed Apr 11 07:51:37 2012] ../../xmm0012830101/products/lightcurves/fullrun_mos2_xmm0012830101_pi300-10000_pass1_cl_src26_src.lc and ../../xmm0012830101/products/lightcurves/fullrun_mos2_xmm0012830101_pi300-10000_pass1_cl_src26_bgd.lc exist, delete to re-create
[Wed Apr 11 07:51:38 2012] fullrun_mos2_xmm0012830101_pi300-10000_pass1_cl_src26.rmf exists, delete to re-create
[Wed Apr 11 07:51:38 2012] fullrun_mos2_xmm0012830101_pi300-10000_pass1_cl_src26.arf exists, delete to re-create
[Wed Apr 11 07:52:12 2012] Updating aperture counts using extracted products
[Wed Apr 11 07:52:12 2012] Error reading totcts from fullrun_mos2_xmm0012830101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed Apr 11 07:52:13 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 07:52:13 2012] Using photon index=1.80, rate=0.0207, arf fullrun_mos2_xmm0012830101_pi300-10000_pass1_cl_src26.arf
[Wed Apr 11 07:52:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 07:52:13 2012] Updating source flux to 3.8e-13
[Wed Apr 11 07:52:16 2012] Flag b found in src. 26 procflags, skipping spectral fitting