[Sat May 18 18:11:07 2013] Detection parameters:
  Position = (312.4, 363.8) = 0 56 16.00 -1 14 47.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 191.6 +/- 26.9
  Background counts = 324.4
  Rate = 0.01 +/- 0.002

[Sat May 18 18:11:07 2013] Off-axis axis estimate = 4.85'
[Sat May 18 18:14:27 2013] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Sat May 18 18:14:27 2013] Initial guess for spatial extent in simple fitting = 8.85"
[Sat May 18 18:14:27 2013] source mask rpix=2.0, npix_max = 25, mask sum = 23, frac = 0.895
[Sat May 18 18:14:27 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 8.85"
[Sat May 18 19:04:28 2013] fullrun_pn_xmm0012440101_pi300-10000_cl_pass0_src9.ximg exists
[Sat May 18 19:04:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0012440101_pi300-10000_cl_pass0_src9.csv
[Sat May 18 19:04:28 2013] fullrun_pn_xmm0012440101_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat May 18 19:04:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0012440101_pi300-10000_cl_pass0_src9.csv
[Sat May 18 19:04:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0012440101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0012440101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 19:04:29 2013] fullrun_pn_xmm0012440101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat May 18 19:04:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0012440101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat May 18 19:04:29 2013] fullrun_pn_xmm0012440101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat May 18 19:04:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0012440101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat May 18 19:04:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0012440101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0012440101_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 20:05:30 2013] Warning, spatial fit 9 centroid is now closest to src. 14
[Sat May 18 20:05:30 2013] Vigneting correction estimate = 1.000000
[Sat May 18 20:05:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 20:05:30 2013] Assessing source extent using major
[Sat May 18 20:05:30 2013] Source does appear to be extended
[Sat May 18 20:05:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 20:05:47 2013] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Sat May 18 20:05:47 2013] Initial guess for spatial extent in simple fitting = 8.85"
[Sat May 18 20:05:47 2013] source mask rpix=2.0, npix_max = 25, mask sum = 23, frac = 0.895
[Sat May 18 20:05:47 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 8.85"
[Sat May 18 21:01:11 2013] fullrun_pn_xmm0012440101_pi300-10000_cl_pass1_src8.ximg exists
[Sat May 18 21:01:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0012440101_pi300-10000_cl_pass1_src8.csv
[Sat May 18 21:01:11 2013] fullrun_pn_xmm0012440101_pi300-10000_cl_pass1_src8_1.ximg exists
[Sat May 18 21:01:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0012440101_pi300-10000_cl_pass1_src8.csv
[Sat May 18 21:01:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0012440101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0012440101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 21:01:11 2013] fullrun_pn_xmm0012440101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sat May 18 21:01:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0012440101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sat May 18 21:01:11 2013] fullrun_pn_xmm0012440101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sat May 18 21:01:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0012440101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sat May 18 21:01:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0012440101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0012440101_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 21:51:46 2013] Warning, spatial fit 8 centroid is now closest to src. 14
[Sat May 18 21:51:46 2013] Source 9 is offset by -0.275163 and 7.606548 pixels which is larger than
2 X fitted extent = 5.300460 x 5.300460, not incorporating fit results
[Sat May 18 21:51:46 2013] Vigneting correction estimate = 1.000000
[Sat May 18 21:51:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 21:51:46 2013] Assessing source extent using major
[Sat May 18 21:51:46 2013] Source does appear to be extended
[Sat May 18 21:51:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 21:52:01 2013] XMMSAS src. selection expression = ellipse(27127.461243, 31605.821289, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 18 21:52:01 2013] Writing source region out to fullrun_pn_xmm0012440101_pi300-10000_pass1_cl_src9_src.reg
[Sat May 18 21:52:01 2013] Extracting stamp from image fullrun_pn_xmm0012440101_pi300-10000_cl_sm2.00.img.gz, (275, 326) - (350, 401)
[Sat May 18 21:52:01 2013] XMMSAS bgd. selection expression = annulus(27127.461243, 31605.821289, 1087.500000, 2175.000000, X, Y) && !ellipse(28355.762756, 30811.686096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24184.435608, 29594.063110, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 18 21:52:01 2013] Writing fullrun_pn_xmm0012440101_pi300-10000_pass1_cl_src9.gif
[Sat May 18 21:56:56 2013] Mean detx,y = (-1658.59, -4267.40) 
[Sat May 18 21:56:59 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 18 21:57:24 2013] Binned source spectrum to 10 counts/bin
[Sat May 18 21:57:24 2013] Setting source spectrum file to fullrun_pn_xmm0012440101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat May 18 21:57:24 2013] Setting bgd. spectrum file to fullrun_pn_xmm0012440101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat May 18 22:18:36 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 18 22:18:36 2013] rmf not generated due to insufficient counts
[Sat May 18 23:11:29 2013] Updating aperture counts using extracted products
[Sat May 18 23:11:29 2013] Total counts from fullrun_pn_xmm0012440101_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 2329.00
[Sat May 18 23:11:29 2013] Total counts from fullrun_pn_xmm0012440101_pi300-10000_pass1_cl_src9_bgd.pi.gz = 12459.00
[Sat May 18 23:11:29 2013] Got source and background scale factors 1078989.000000, 7169259.000000
[Sat May 18 23:11:29 2013] User source parameters:
  Position = (312.4, 363.8) = 0 56 16.00 -1 14 47.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 453.9 +/- 49.3
  Background aperture counts = 1875.1
  Rate = 0.02 +/- 0.002

[Sat May 18 23:11:29 2013] Updating counts from extracted products
[Sat May 18 23:11:29 2013] Set source signif. to 453.89/43.30 = 10.48
[Sat May 18 23:11:34 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 23:11:34 2013] Using photon index=1.80, rate=0.017, arf fullrun_pn_xmm0012440101_pi300-10000_pass1_cl_src9.arf
[Sat May 18 23:11:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 23:11:34 2013] Updating source flux to 6.8e-14
[Sat May 18 23:11:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 18 23:11:50 2013] xmm0012440101/analysis//spectral/fullrun_pn_xmm0012440101_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete