[Sat May 18 18:11:54 2013] Detection parameters:
  Position = (362.8, 234.9) = 0 56 1.38 -1 24 6.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.5 +/- 13.9
  Background counts = 35.0
  Rate = 0.004 +/- 0.0006

[Sat May 18 18:11:54 2013] Off-axis axis estimate = 6.55'
[Sat May 18 19:28:56 2013] Using EEF radius (= 9.71 ")to estimate initial spatial extent for simple fitting
[Sat May 18 19:28:56 2013] Initial guess for spatial extent in simple fitting = 9.71"
[Sat May 18 19:28:56 2013] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.207
[Sat May 18 19:28:56 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 9.71"
[Sat May 18 20:05:23 2013] fullrun_mos2_xmm0012440101_pi300-10000_cl_pass0_src10.ximg exists
[Sat May 18 20:05:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0012440101_pi300-10000_cl_pass0_src10.csv
[Sat May 18 20:05:23 2013] fullrun_mos2_xmm0012440101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat May 18 20:05:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0012440101_pi300-10000_cl_pass0_src10.csv
[Sat May 18 20:05:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0012440101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0012440101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 20:05:23 2013] fullrun_mos2_xmm0012440101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat May 18 20:05:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0012440101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat May 18 20:05:23 2013] fullrun_mos2_xmm0012440101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat May 18 20:05:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0012440101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat May 18 20:05:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0012440101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0012440101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 20:05:38 2013] Source 22 is offset by -9.124053 and 0.437446 pixels which is larger than
2 X fitted extent = 1.115605 x 1.115605, not incorporating fit results
[Sat May 18 20:05:38 2013] Vigneting correction estimate = 1.000000
[Sat May 18 20:05:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 20:05:38 2013] Assessing source extent using major
[Sat May 18 20:05:38 2013] Source does appear to be extended
[Sat May 18 20:05:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 21:23:18 2013] Using EEF radius (= 9.71 ")to estimate initial spatial extent for simple fitting
[Sat May 18 21:23:18 2013] Initial guess for spatial extent in simple fitting = 9.71"
[Sat May 18 21:23:18 2013] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.207
[Sat May 18 21:23:18 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 9.71"
[Sat May 18 21:51:39 2013] fullrun_mos2_xmm0012440101_pi300-10000_cl_pass1_src10.ximg exists
[Sat May 18 21:51:39 2013] fullrun_mos2_xmm0012440101_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat May 18 21:51:39 2013] Fit fullrun_mos2_xmm0012440101_pi300-10000_cl_pass1_src10 appears to have run properly
[Sat May 18 21:51:39 2013] fullrun_mos2_xmm0012440101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat May 18 21:51:39 2013] fullrun_mos2_xmm0012440101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat May 18 21:51:39 2013] Fit fullrun_mos2_xmm0012440101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sat May 18 21:51:53 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 13.562796 pixels away
[Sat May 18 21:51:53 2013] Vigneting correction estimate = 1.000000
[Sat May 18 21:51:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 21:51:53 2013] Assessing source extent using major
[Sat May 18 21:51:53 2013] Source does appear to be extended
[Sat May 18 21:51:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 22:58:30 2013] XMMSAS src. selection expression = ellipse(31512.409393, 20389.434967, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 18 22:58:30 2013] Writing source region out to fullrun_mos2_xmm0012440101_pi300-10000_pass1_cl_src22_src.reg
[Sat May 18 22:58:30 2013] Extracting stamp from image fullrun_mos2_xmm0012440101_pi300-10000_cl_sm2.00.img.gz, (325, 197) - (400, 272)
[Sat May 18 22:58:30 2013] XMMSAS bgd. selection expression = annulus(31512.409393, 20389.434967, 1087.500000, 2175.000000, X, Y)
[Sat May 18 22:58:30 2013] Writing fullrun_mos2_xmm0012440101_pi300-10000_pass1_cl_src22.gif
[Sat May 18 23:00:51 2013] Mean detx,y = (-5931.28, -4926.46) 
[Sat May 18 23:00:53 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 18 23:01:14 2013] Binned source spectrum to 10 counts/bin
[Sat May 18 23:01:15 2013] Setting source spectrum file to fullrun_mos2_xmm0012440101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sat May 18 23:01:15 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0012440101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Sat May 18 23:05:41 2013] Not generating rmf since there are only 90 counts
[Sat May 18 23:05:41 2013] rmf not generated due to insufficient counts
[Sat May 18 23:11:38 2013] Updating aperture counts using extracted products
[Sat May 18 23:11:38 2013] Total counts from fullrun_mos2_xmm0012440101_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 302.00
[Sat May 18 23:11:38 2013] Total counts from fullrun_mos2_xmm0012440101_pi300-10000_pass1_cl_src22_bgd.pi.gz = 2020.00
[Sat May 18 23:11:38 2013] Got source and background scale factors 1340048.000000, 10386947.000000
[Sat May 18 23:11:38 2013] User source parameters:
  Position = (362.8, 234.9) = 0 56 1.38 -1 24 6.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 41.4 +/- 18.4
  Background aperture counts = 260.6
  Rate = 0.001 +/- 0.0006

[Sat May 18 23:11:38 2013] Updating counts from extracted products
[Sat May 18 23:11:38 2013] Set source signif. to 41.39/16.14 = 2.56
[Sat May 18 23:11:40 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 23:11:40 2013] Using photon index=1.80, rate=0.00142, arf fullrun_mos2_xmm0012440101_pi300-10000_pass1_cl_src22.arf
[Sat May 18 23:11:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 23:11:40 2013] Updating source flux to 1.9e-14
[Sat May 18 23:11:44 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 18 23:11:45 2013] xmm0012440101/analysis//spectral/fullrun_mos2_xmm0012440101_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete