[Mon Jun 18 10:26:30 2012] Detection parameters:
  Position = (311.4, 279.1) = 15 25 53.97 51 36 48.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 863.4 +/- 36.0
  Background counts = 30.9
  Rate = 0.02 +/- 0.001

[Mon Jun 18 10:26:31 2012] Off-axis axis estimate = 1.69'
[Mon Jun 18 12:20:19 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 12:20:19 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Mon Jun 18 12:20:19 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.060
[Mon Jun 18 12:20:19 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Mon Jun 18 12:53:49 2012] fullrun_mos2_xmm0011830201_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun 18 12:53:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011830201_pi300-10000_cl_pass0_src1.csv
[Mon Jun 18 12:53:49 2012] fullrun_mos2_xmm0011830201_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun 18 12:53:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011830201_pi300-10000_cl_pass0_src1.csv
[Mon Jun 18 12:53:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011830201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011830201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 12:53:50 2012] fullrun_mos2_xmm0011830201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 18 12:53:50 2012] fullrun_mos2_xmm0011830201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 18 12:53:50 2012] Fit fullrun_mos2_xmm0011830201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jun 18 12:54:06 2012] Spatial fit model total counts = 814.856000, observed total counts = 779.000000
[Mon Jun 18 12:54:06 2012] Offset between fit and detection position for source 2 = 0.083923 pixels
[Mon Jun 18 12:54:06 2012] 808.627000 total counts/ 286.812000 bgd. counts: snr = 30.811859
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.083923 pixels
  Position = (311.4, 279.2) = 15 25 53.99 51 36 48.2
  Extent = 4.7 (4.4-5.1)", rotation angle = 0
  Source counts = 521.8 +/- 28.4
  Background counts = 286.8
  Rate = 0.02 +/- 0.0009
[Mon Jun 18 12:54:06 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 12:54:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 12:54:06 2012] Assessing source extent using major axis lower bound
[Mon Jun 18 12:54:06 2012] Source does appear to be extended
[Mon Jun 18 12:54:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 14:40:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 18 14:40:55 2012] Initial guess for spatial extent in simple fitting = 4.74"
[Mon Jun 18 14:40:55 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.890
[Mon Jun 18 14:40:55 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.74"
[Mon Jun 18 15:11:34 2012] fullrun_mos2_xmm0011830201_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun 18 15:11:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011830201_pi300-10000_cl_pass1_src1.csv
[Mon Jun 18 15:11:34 2012] fullrun_mos2_xmm0011830201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun 18 15:11:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011830201_pi300-10000_cl_pass1_src1.csv
[Mon Jun 18 15:11:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011830201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011830201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 15:11:35 2012] fullrun_mos2_xmm0011830201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 18 15:11:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011830201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jun 18 15:11:35 2012] fullrun_mos2_xmm0011830201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 18 15:11:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011830201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jun 18 15:11:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011830201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011830201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 15:11:52 2012] Warning, spatial fit 1 centroid is now closest to src. 20
[Mon Jun 18 15:11:52 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 15:11:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 15:11:52 2012] Assessing source extent using major axis lower bound
[Mon Jun 18 15:11:52 2012] Source does appear to be extended
[Mon Jun 18 15:11:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 16:38:47 2012] XMMSAS src. selection expression = ellipse(27043.016000, 24240.403600, 284.539208, 284.539208, 0.000000, X, Y)
[Mon Jun 18 16:38:47 2012] Writing source region out to fullrun_mos2_xmm0011830201_pi300-10000_pass1_cl_src2_src.reg
[Mon Jun 18 16:38:47 2012] Extracting stamp from image fullrun_mos2_xmm0011830201_pi300-10000_cl_sm2.00.img.gz, (295, 263) - (328, 296)
[Mon Jun 18 16:38:47 2012] XMMSAS bgd. selection expression = annulus(27043.016000, 24240.403600, 474.232014, 948.464027, X, Y)
[Mon Jun 18 16:38:47 2012] Writing fullrun_mos2_xmm0011830201_pi300-10000_pass1_cl_src2.gif
[Mon Jun 18 16:38:52 2012] Mean detx,y = (27.64, 23.56) 
[Mon Jun 18 16:38:53 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 18 16:39:01 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 18 16:39:01 2012] Setting source spectrum file to fullrun_mos2_xmm0011830201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Jun 18 16:39:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0011830201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Jun 18 16:54:37 2012] Updating aperture counts using extracted products
[Mon Jun 18 16:54:37 2012] Error reading totcts from fullrun_mos2_xmm0011830201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Jun 18 16:54:38 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 16:54:38 2012] Using photon index=1.80, rate=0.0163, arf fullrun_mos2_xmm0011830201_pi300-10000_pass1_cl_src2.arf
[Mon Jun 18 16:54:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 16:54:38 2012] Updating source flux to 2.2e-13
[Mon Jun 18 16:55:02 2012] Reading fit data from xmm0011830201/analysis//spectral/fullrun_mos2_xmm0011830201_pi300-10000_pass1_cl_src2_pl.csv
[Mon Jun 18 16:55:02 2012] Spectral fit parameter nH value = 7.36199e+20
[Mon Jun 18 16:55:02 2012] Spectral fit parameter PhoIndex value = 1.77999
[Mon Jun 18 16:55:02 2012] Failed to get F(0.3-8.0) from xmm0011830201/analysis//spectral/fullrun_mos2_xmm0011830201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Jun 18 16:55:02 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 16:55:02 2012] Using Nh = 7.4e+20, photon index=1.78, rate=0.0163, arf fullrun_mos2_xmm0011830201_pi300-10000_pass1_cl_src2.arf
[Mon Jun 18 16:55:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 16:55:02 2012] Updating source flux to 2.4e-13