[Mon Jun 18 10:26:06 2012] Detection parameters:
  Position = (389.5, 173.3) = 15 25 17.62 51 29 4.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.4 +/- 11.3
  Background counts = 17.6
  Rate = 0.002 +/- 0.0003

[Mon Jun 18 10:26:08 2012] Off-axis axis estimate = 11.22'
[Mon Jun 18 11:41:04 2012] Using EEF radius (= 12.04 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 11:41:04 2012] Initial guess for spatial extent in simple fitting = 12.04"
[Mon Jun 18 11:41:04 2012] source mask rpix=2.8, npix_max = 42, mask sum = 41, frac = 0.960
[Mon Jun 18 11:41:04 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 12.04"
[Mon Jun 18 12:20:18 2012] fullrun_mos1_xmm0011830201_pi300-10000_cl_pass0_src21.ximg exists
[Mon Jun 18 12:20:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011830201_pi300-10000_cl_pass0_src21.csv
[Mon Jun 18 12:20:18 2012] fullrun_mos1_xmm0011830201_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon Jun 18 12:20:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011830201_pi300-10000_cl_pass0_src21.csv
[Mon Jun 18 12:20:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011830201_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011830201_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 12:20:19 2012] fullrun_mos1_xmm0011830201_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon Jun 18 12:20:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011830201_pi300-10000_cl_pass0_tfrozen_src21.csv
[Mon Jun 18 12:20:19 2012] fullrun_mos1_xmm0011830201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Jun 18 12:20:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011830201_pi300-10000_cl_pass0_tfrozen_src21.csv
[Mon Jun 18 12:20:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011830201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011830201_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 12:54:02 2012] Spatial fit model total counts = 207.636000, observed total counts = 161.000000
[Mon Jun 18 12:54:02 2012] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 18 12:54:02 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 12:54:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 12:54:02 2012] Assessing source extent using major
[Mon Jun 18 12:54:02 2012] Source does appear to be extended
[Mon Jun 18 12:54:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 12:54:02 2012] Source is confused with source 6
[Mon Jun 18 14:03:22 2012] Using EEF radius (= 12.04 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 14:03:22 2012] Initial guess for spatial extent in simple fitting = 12.04"
[Mon Jun 18 14:03:22 2012] source mask rpix=2.8, npix_max = 42, mask sum = 41, frac = 0.960
[Mon Jun 18 14:03:22 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 12.04"
[Mon Jun 18 14:40:55 2012] fullrun_mos1_xmm0011830201_pi300-10000_cl_pass1_src21.ximg exists
[Mon Jun 18 14:40:55 2012] fullrun_mos1_xmm0011830201_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon Jun 18 14:40:55 2012] Fit fullrun_mos1_xmm0011830201_pi300-10000_cl_pass1_src21 appears to have run properly
[Mon Jun 18 14:40:55 2012] fullrun_mos1_xmm0011830201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon Jun 18 14:40:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011830201_pi300-10000_cl_pass1_tfrozen_src21.csv
[Mon Jun 18 14:40:55 2012] fullrun_mos1_xmm0011830201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon Jun 18 14:40:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011830201_pi300-10000_cl_pass1_tfrozen_src21.csv
[Mon Jun 18 14:40:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011830201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011830201_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 15:11:48 2012] Spatial fit model total counts = 176.406000, observed total counts = 161.000000
[Mon Jun 18 15:11:48 2012] Offset between fit and detection position for source 20 = 2.818524 pixels
[Mon Jun 18 15:11:48 2012] 175.682700 total counts/ 73.102700 bgd. counts: snr = 11.997644
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 2.818524 pixels
  Position = (386.8, 174.0) = 15 25 18.90 51 29 10.0
  Extent = 12.4" x 8.3", rotation angle = 358
  Source counts = 102.6 +/- 13.3
  Background counts = 73.1
  Rate = 0.003 +/- 0.0004
[Mon Jun 18 15:11:48 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 15:11:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 15:11:48 2012] Assessing source extent using major
[Mon Jun 18 15:11:48 2012] Source does appear to be extended
[Mon Jun 18 15:11:48 2012] Computing asymmetry using major and minor axis, asym = 1.49
[Mon Jun 18 16:21:06 2012] XMMSAS src. selection expression = ellipse(33600.769742, 15085.261588, 742.710021, 499.385983, 358.334791, X, Y)
[Mon Jun 18 16:21:06 2012] Writing source region out to fullrun_mos1_xmm0011830201_pi300-10000_pass1_cl_src20_src.reg
[Mon Jun 18 16:21:06 2012] Extracting stamp from image fullrun_mos1_xmm0011830201_pi300-10000_cl_sm2.00.img.gz, (344, 131) - (429, 217)
[Mon Jun 18 16:21:06 2012] XMMSAS bgd. selection expression = annulus(33600.769742, 15085.261588, 1237.850036, 2475.700071, X, Y) && !ellipse(33304.575409, 15149.516937, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 18 16:21:06 2012] Writing fullrun_mos1_xmm0011830201_pi300-10000_pass1_cl_src20.gif
[Mon Jun 18 16:27:15 2012] Mean detx,y = (9621.31, 5978.68) 
[Mon Jun 18 16:27:16 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 18 16:27:34 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 18 16:27:34 2012] Setting source spectrum file to fullrun_mos1_xmm0011830201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Jun 18 16:27:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0011830201_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Mon Jun 18 16:54:37 2012] Updating aperture counts using extracted products
[Mon Jun 18 16:54:37 2012] Error reading totcts from fullrun_mos1_xmm0011830201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Jun 18 16:54:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 16:54:37 2012] Using photon index=1.80, rate=0.0032, arf fullrun_mos1_xmm0011830201_pi300-10000_pass1_cl_src20.arf
[Mon Jun 18 16:54:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 16:54:37 2012] Updating source flux to 7.2e-14
[Mon Jun 18 16:54:39 2012] Flag p found in src. 20 procflags, skipping spectral fitting
[Mon Jun 18 16:54:39 2012] Flag c found in src. 20 procflags, skipping spectral fitting