[Mon Jun 18 10:26:05 2012] Detection parameters:
  Position = (453.4, 301.0) = 15 24 47.61 51 38 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.1 +/- 12.8
  Background counts = 20.6
  Rate = 0.002 +/- 0.0003

[Mon Jun 18 10:26:08 2012] Off-axis axis estimate = 11.24'
[Mon Jun 18 11:41:04 2012] Using EEF radius (= 12.05 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 11:41:04 2012] Initial guess for spatial extent in simple fitting = 12.05"
[Mon Jun 18 11:41:04 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.982
[Mon Jun 18 11:41:04 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 12.05"
[Mon Jun 18 12:20:18 2012] fullrun_mos1_xmm0011830201_pi300-10000_cl_pass0_src14.ximg exists
[Mon Jun 18 12:20:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011830201_pi300-10000_cl_pass0_src14.csv
[Mon Jun 18 12:20:18 2012] fullrun_mos1_xmm0011830201_pi300-10000_cl_pass0_src14_1.ximg exists
[Mon Jun 18 12:20:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011830201_pi300-10000_cl_pass0_src14.csv
[Mon Jun 18 12:20:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011830201_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011830201_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 12:20:19 2012] fullrun_mos1_xmm0011830201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Mon Jun 18 12:20:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011830201_pi300-10000_cl_pass0_tfrozen_src14.csv
[Mon Jun 18 12:20:19 2012] fullrun_mos1_xmm0011830201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Mon Jun 18 12:20:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011830201_pi300-10000_cl_pass0_tfrozen_src14.csv
[Mon Jun 18 12:20:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011830201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011830201_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 12:54:02 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 14.735354 pixels away
[Mon Jun 18 12:54:02 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 12:54:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 12:54:02 2012] Assessing source extent using major
[Mon Jun 18 12:54:02 2012] Source does appear to be extended
[Mon Jun 18 12:54:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 14:03:22 2012] Using EEF radius (= 12.05 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 14:03:22 2012] Initial guess for spatial extent in simple fitting = 12.05"
[Mon Jun 18 14:03:22 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.982
[Mon Jun 18 14:03:22 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 12.05"
[Mon Jun 18 14:40:55 2012] fullrun_mos1_xmm0011830201_pi300-10000_cl_pass1_src14.ximg exists
[Mon Jun 18 14:40:55 2012] fullrun_mos1_xmm0011830201_pi300-10000_cl_pass1_src14_1.ximg exists
[Mon Jun 18 14:40:55 2012] Fit fullrun_mos1_xmm0011830201_pi300-10000_cl_pass1_src14 appears to have run properly
[Mon Jun 18 14:40:55 2012] fullrun_mos1_xmm0011830201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Mon Jun 18 14:40:55 2012] fullrun_mos1_xmm0011830201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Mon Jun 18 14:40:55 2012] Fit fullrun_mos1_xmm0011830201_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Mon Jun 18 15:11:48 2012] Spatial fit model total counts = 157.579000, observed total counts = 149.000000
[Mon Jun 18 15:11:48 2012] Offset between fit and detection position for source 10 = 0.207658 pixels
[Mon Jun 18 15:11:48 2012] 156.517900 total counts/ 101.657000 bgd. counts: snr = 5.441195
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.207658 pixels
  Position = (453.3, 301.2) = 15 24 47.69 51 38 22.4
  Extent = 5.8 (4.6-7.3)", rotation angle = 0
  Source counts = 54.9 +/- 12.5
  Background counts = 101.7
  Rate = 0.002 +/- 0.0004
[Mon Jun 18 15:11:48 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 15:11:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 15:11:48 2012] Assessing source extent using major axis lower bound
[Mon Jun 18 15:11:48 2012] Source does appear to be extended
[Mon Jun 18 15:11:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 16:21:06 2012] XMMSAS src. selection expression = ellipse(39385.204000, 26152.004400, 346.432810, 346.432810, 0.000000, X, Y)
[Mon Jun 18 16:21:06 2012] Writing source region out to fullrun_mos1_xmm0011830201_pi300-10000_pass1_cl_src10_src.reg
[Mon Jun 18 16:21:06 2012] Extracting stamp from image fullrun_mos1_xmm0011830201_pi300-10000_cl_sm2.00.img.gz, (433, 281) - (473, 321)
[Mon Jun 18 16:21:06 2012] XMMSAS bgd. selection expression = annulus(39385.204000, 26152.004400, 577.388017, 1154.776033, X, Y)
[Mon Jun 18 16:21:06 2012] Writing fullrun_mos1_xmm0011830201_pi300-10000_pass1_cl_src10.gif
[Mon Jun 18 16:24:26 2012] Mean detx,y = (11102.43, -6351.34) 
[Mon Jun 18 16:24:27 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 18 16:24:41 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 18 16:24:41 2012] Setting source spectrum file to fullrun_mos1_xmm0011830201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Jun 18 16:24:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0011830201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon Jun 18 16:33:18 2012] Not generating rmf since there are only 54 counts
[Mon Jun 18 16:33:18 2012] rmf not generated due to insufficient counts
[Mon Jun 18 16:54:37 2012] Updating aperture counts using extracted products
[Mon Jun 18 16:54:37 2012] Error reading totcts from fullrun_mos1_xmm0011830201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Jun 18 16:54:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 16:54:37 2012] Using photon index=1.80, rate=0.00171, arf fullrun_mos1_xmm0011830201_pi300-10000_pass1_cl_src10.arf
[Mon Jun 18 16:54:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 16:54:37 2012] Updating source flux to 4.7e-14
[Mon Jun 18 16:54:39 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting