[Mon Dec 26 12:21:36 2011] Detection parameters:
  Position = (288.0, 275.0) = 1 17 39.07 -73 28 1.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5320.7 +/- 108.7
  Background counts = 549.6
  Rate = 0.2 +/- 0.004

[Mon Dec 26 12:21:36 2011] Off-axis axis estimate = 1.86'
[Mon Dec 26 13:09:47 2011] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 13:09:47 2011] Initial guess for spatial extent in simple fitting = 7.36"
[Mon Dec 26 13:09:47 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.833
[Mon Dec 26 13:09:47 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.36"
[Mon Dec 26 19:37:16 2011] fullrun_pn_xmm0011450201_pi300-10000_cl_pass0_src3.ximg exists
[Mon Dec 26 19:37:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011450201_pi300-10000_cl_pass0_src3.csv
[Mon Dec 26 19:37:16 2011] fullrun_pn_xmm0011450201_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Dec 26 19:37:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011450201_pi300-10000_cl_pass0_src3.csv
[Mon Dec 26 19:37:16 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0011450201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0011450201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 19:37:17 2011] fullrun_pn_xmm0011450201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Dec 26 19:37:17 2011] fullrun_pn_xmm0011450201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Dec 26 19:37:17 2011] Fit fullrun_pn_xmm0011450201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Dec 27 02:49:09 2011] Spatial fit model total counts = 33474.900000, observed total counts = 33471.000000
[Tue Dec 27 02:49:09 2011] Offset between fit and detection position for source 3 = 1.143257 pixels
[Tue Dec 27 02:49:09 2011] Warning, changing simple spatial fit ID from 3 to 1
[Tue Dec 27 02:49:09 2011] 36156.000000 total counts/ 23597.500000 bgd. counts: snr = 81.753202
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.143257 pixels
  Position = (287.0, 274.3) = 1 17 40.03 -73 28 4.6
  Extent = 14.4 (14.4-28.8)", rotation angle = 0
  Source counts = 12558.5 +/- 190.1
  Background counts = 23597.5
  Rate = 0.3 +/- 0.005
[Tue Dec 27 02:49:09 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 02:49:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 02:49:09 2011] Assessing source extent using major axis lower bound
[Tue Dec 27 02:49:09 2011] Source does appear to be extended
[Tue Dec 27 02:49:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 02:49:09 2011] Source is confused with source 1
[Tue Dec 27 02:49:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 27 02:49:59 2011] Initial guess for spatial extent in simple fitting = 14.40"
[Tue Dec 27 02:49:59 2011] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.965
[Tue Dec 27 02:49:59 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 14.40"
[Wed Dec 28 20:26:40 2011] fullrun_pn_xmm0011450201_pi300-10000_cl_pass1_src3.ximg exists
[Wed Dec 28 20:26:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011450201_pi300-10000_cl_pass1_src3.csv
[Wed Dec 28 20:26:40 2011] fullrun_pn_xmm0011450201_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Dec 28 20:26:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011450201_pi300-10000_cl_pass1_src3.csv
[Wed Dec 28 20:26:40 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0011450201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0011450201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 20:26:41 2011] fullrun_pn_xmm0011450201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Dec 28 20:26:41 2011] fullrun_pn_xmm0011450201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Dec 28 20:26:41 2011] Fit fullrun_pn_xmm0011450201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Dec 29 02:49:25 2011] Warning, spatial fit 3 centroid is now closest to src. 1
[Thu Dec 29 02:49:25 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 02:49:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 02:49:25 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 02:49:25 2011] Source does appear to be extended
[Thu Dec 29 02:49:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 02:50:15 2011] Counts = 12558.500000, rescaling region sizes by 3.000000
[Thu Dec 29 02:50:15 2011] XMMSAS src. selection expression = ellipse(24922.454000, 23817.864000, 2591.298075, 2591.298075, 0.000000, X, Y)
[Thu Dec 29 02:50:15 2011] Writing source region out to fullrun_pn_xmm0011450201_pi300-10000_pass1_cl_src3_src.reg
[Thu Dec 29 02:50:15 2011] Extracting stamp from image fullrun_pn_xmm0011450201_pi300-10000_cl_sm2.00.img.gz, (138, 125) - (436, 423)
[Thu Dec 29 02:50:15 2011] XMMSAS bgd. selection expression = annulus(24922.454000, 23817.864000, 12956.490373, 25912.980746, X, Y) && !ellipse(25435.859772, 24132.107635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24605.958000, 23519.706000, 3532.800102, 3532.800102, 0.000000, X, Y) && !ellipse(28111.616882, 25013.011841, 5220.000000, 5220.000000, 0.000000, X, Y) && !ellipse(27238.091003, 25474.617889, 5220.000000, 5220.000000, 0.000000, X, Y) && !ellipse(27901.961800, 25581.982000, 1846.380053, 1809.141652, 6.114000, X, Y)
[Thu Dec 29 02:50:15 2011] Writing fullrun_pn_xmm0011450201_pi300-10000_pass1_cl_src3.gif
[Thu Dec 29 03:31:10 2011] Mean detx,y = (278.76, 1887.67) 
[Thu Dec 29 03:31:31 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 29 03:43:50 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 29 03:43:51 2011] Setting source spectrum file to fullrun_pn_xmm0011450201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Dec 29 03:43:51 2011] Setting bgd. spectrum file to fullrun_pn_xmm0011450201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jan  1 18:02:32 2012] Updating aperture counts using extracted products
[Sun Jan  1 18:02:32 2012] Error reading totcts from fullrun_pn_xmm0011450201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jan  1 18:02:32 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 18:02:32 2012] Using photon index=1.80, rate=0.314, arf fullrun_pn_xmm0011450201_pi300-10000_pass1_cl_src3.arf
[Sun Jan  1 18:02:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 18:02:33 2012] Updating source flux to 9.4e-13
[Sun Jan  1 18:12:31 2012] Flag c found in src. 3 procflags, skipping spectral fitting