[Mon Dec 26 12:21:36 2011] Detection parameters:
  Position = (283.2, 272.1) = 1 17 43.95 -73 28 13.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6661.1 +/- 107.9
  Background counts = 532.1
  Rate = 0.3 +/- 0.004

[Mon Dec 26 12:21:36 2011] Off-axis axis estimate = 2.21'
[Mon Dec 26 13:09:47 2011] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 13:09:47 2011] Initial guess for spatial extent in simple fitting = 7.53"
[Mon Dec 26 13:09:47 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.803
[Mon Dec 26 13:09:47 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 7.53"
[Mon Dec 26 19:37:16 2011] fullrun_pn_xmm0011450201_pi300-10000_cl_pass0_src2.ximg exists
[Mon Dec 26 19:37:16 2011] fullrun_pn_xmm0011450201_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Dec 26 19:37:16 2011] Fit fullrun_pn_xmm0011450201_pi300-10000_cl_pass0_src2 appears to have run properly
[Mon Dec 26 19:37:17 2011] fullrun_pn_xmm0011450201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Dec 26 19:37:17 2011] fullrun_pn_xmm0011450201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Dec 26 19:37:17 2011] Fit fullrun_pn_xmm0011450201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Dec 27 02:49:09 2011] Source 2 is offset by -6.748964 and 5.988588 pixels which is larger than
2 X fitted extent = 0.865880 x 0.865880, not incorporating fit results
[Tue Dec 27 02:49:09 2011] Spatial fit model total counts = 27969.300000, observed total counts = 27032.000000
[Tue Dec 27 02:49:09 2011] Offset between fit and detection position for source 2 = 1.180831 pixels
[Tue Dec 27 02:49:09 2011] Warning, changing simple spatial fit ID from 2 to 3
[Tue Dec 27 02:49:09 2011] 31761.950000 total counts/ 6214.750000 bgd. counts: snr = 324.064513
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.180831 pixels
  Position = (283.4, 270.9) = 1 17 43.74 -73 28 19.5
  Extent = 14.7 (14.7-29.4)", rotation angle = 0
  Source counts = 25547.2 +/- 178.2
  Background counts = 6214.8
  Rate = 0.6 +/- 0.004
[Tue Dec 27 02:49:09 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 02:49:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 02:49:09 2011] Assessing source extent using major axis lower bound
[Tue Dec 27 02:49:09 2011] Source does appear to be extended
[Tue Dec 27 02:49:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 02:49:09 2011] Source is confused with source 3
[Tue Dec 27 02:49:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 27 02:49:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Dec 27 02:49:59 2011] Initial guess for spatial extent in simple fitting = 14.72"
[Tue Dec 27 02:49:59 2011] source mask rpix=3.4, npix_max = 60, mask sum = 52, frac = 0.862
[Tue Dec 27 02:49:59 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 14.72"
[Wed Dec 28 20:26:40 2011] fullrun_pn_xmm0011450201_pi300-10000_cl_pass1_src2.ximg exists
[Wed Dec 28 20:26:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011450201_pi300-10000_cl_pass1_src2.csv
[Wed Dec 28 20:26:40 2011] fullrun_pn_xmm0011450201_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Dec 28 20:26:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011450201_pi300-10000_cl_pass1_src2.csv
[Wed Dec 28 20:26:40 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0011450201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0011450201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 20:26:41 2011] fullrun_pn_xmm0011450201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Dec 28 20:26:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011450201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Dec 28 20:26:41 2011] fullrun_pn_xmm0011450201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Dec 28 20:26:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011450201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Dec 28 20:26:41 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0011450201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0011450201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 02:49:25 2011] Warning, spatial fit 2 centroid is now closest to src. 1
[Thu Dec 29 02:49:25 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 02:49:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 02:49:25 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 02:49:25 2011] Source does appear to be extended
[Thu Dec 29 02:49:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 02:50:15 2011] Counts = 25547.200000, rescaling region sizes by 3.000000
[Thu Dec 29 02:50:15 2011] XMMSAS src. selection expression = ellipse(24605.958000, 23519.706000, 2649.600076, 2649.600076, 0.000000, X, Y)
[Thu Dec 29 02:50:15 2011] Writing source region out to fullrun_pn_xmm0011450201_pi300-10000_pass1_cl_src2_src.reg
[Thu Dec 29 02:50:15 2011] Extracting stamp from image fullrun_pn_xmm0011450201_pi300-10000_cl_sm2.00.img.gz, (131, 119) - (436, 423)
[Thu Dec 29 02:50:15 2011] XMMSAS bgd. selection expression = annulus(24605.958000, 23519.706000, 13248.000381, 26496.000762, X, Y) && !ellipse(25435.859772, 24132.107635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24922.454000, 23817.864000, 3455.064099, 3455.064099, 0.000000, X, Y) && !ellipse(28111.616882, 25013.011841, 5220.000000, 5220.000000, 0.000000, X, Y) && !ellipse(27238.091003, 25474.617889, 5220.000000, 5220.000000, 0.000000, X, Y) && !ellipse(27901.961800, 25581.982000, 1846.380053, 1809.141652, 6.114000, X, Y)
[Thu Dec 29 02:50:15 2011] Writing fullrun_pn_xmm0011450201_pi300-10000_pass1_cl_src2.gif
[Thu Dec 29 03:09:15 2011] Mean detx,y = (317.03, 2286.11) 
[Thu Dec 29 03:09:34 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 29 03:23:20 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 29 03:23:21 2011] Setting source spectrum file to fullrun_pn_xmm0011450201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Dec 29 03:23:21 2011] Setting bgd. spectrum file to fullrun_pn_xmm0011450201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jan  1 18:02:32 2012] Updating aperture counts using extracted products
[Sun Jan  1 18:02:32 2012] Error reading totcts from fullrun_pn_xmm0011450201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jan  1 18:02:32 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 18:02:32 2012] Using photon index=1.80, rate=0.639, arf fullrun_pn_xmm0011450201_pi300-10000_pass1_cl_src2.arf
[Sun Jan  1 18:02:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 18:02:32 2012] Updating source flux to 2e-12
[Sun Jan  1 18:12:31 2012] Flag b found in src. 2 procflags, skipping spectral fitting
[Sun Jan  1 18:12:31 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Sun Jan  1 18:13:47 2012] Reading fit data from xmm0011450201/analysis//spectral/fullrun_pn_xmm0011450201_pi300-10000_pass1_cl_src2_pl.csv
[Sun Jan  1 18:13:47 2012] Spectral fit parameter nH value = 7.87909e+20
[Sun Jan  1 18:13:47 2012] Spectral fit parameter PhoIndex value = 1.0049
[Sun Jan  1 18:13:47 2012] Failed to get F(0.3-8.0) from xmm0011450201/analysis//spectral/fullrun_pn_xmm0011450201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Jan  1 18:13:47 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 18:13:47 2012] Using Nh = 7.9e+20, photon index=1.00, rate=0.639, arf fullrun_pn_xmm0011450201_pi300-10000_pass1_cl_src2.arf
[Sun Jan  1 18:13:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 18:13:47 2012] Updating source flux to 4.2e-12