[Mon Dec 26 12:24:07 2011] Detection parameters:
  Position = (481.1, 386.2) = 1 14 23.75 -73 19 46.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.6 +/- 15.9
  Background counts = 20.3
  Rate = 0.003 +/- 0.0004

[Mon Dec 26 12:24:10 2011] Off-axis axis estimate = 14.69'
[Mon Dec 26 23:05:13 2011] Using EEF radius (= 13.77 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 23:05:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 26 23:05:13 2011] Initial guess for spatial extent in simple fitting = 13.77"
[Mon Dec 26 23:05:13 2011] source mask rpix=3.2, npix_max = 53, mask sum = 50, frac = 0.930
[Mon Dec 26 23:05:13 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 13.77"
[Tue Dec 27 02:49:03 2011] fullrun_mos2_xmm0011450201_pi300-10000_cl_pass0_src16.ximg exists
[Tue Dec 27 02:49:03 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0011450201_pi300-10000_cl_pass0_src16.csv
[Tue Dec 27 02:49:03 2011] fullrun_mos2_xmm0011450201_pi300-10000_cl_pass0_src16_1.ximg exists
[Tue Dec 27 02:49:03 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0011450201_pi300-10000_cl_pass0_src16.csv
[Tue Dec 27 02:49:03 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011450201_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011450201_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 02:49:03 2011] fullrun_mos2_xmm0011450201_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Tue Dec 27 02:49:04 2011] fullrun_mos2_xmm0011450201_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Tue Dec 27 02:49:04 2011] Fit fullrun_mos2_xmm0011450201_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Tue Dec 27 02:49:35 2011] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 18.536486 pixels away
[Tue Dec 27 02:49:35 2011] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 11.377477 pixels away
[Tue Dec 27 02:49:35 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 02:49:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 02:49:35 2011] Assessing source extent using major
[Tue Dec 27 02:49:35 2011] Source does appear to be extended
[Tue Dec 27 02:49:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 02:49:35 2011] Source is confused with source 4
[Thu Dec 29 00:21:49 2011] Using EEF radius (= 13.77 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 00:21:49 2011] Initial guess for spatial extent in simple fitting = 13.77"
[Thu Dec 29 00:21:49 2011] source mask rpix=3.2, npix_max = 53, mask sum = 50, frac = 0.930
[Thu Dec 29 00:21:49 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 13.77"
[Thu Dec 29 02:49:19 2011] fullrun_mos2_xmm0011450201_pi300-10000_cl_pass1_src13.ximg exists
[Thu Dec 29 02:49:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011450201_pi300-10000_cl_pass1_src13.csv
[Thu Dec 29 02:49:19 2011] fullrun_mos2_xmm0011450201_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu Dec 29 02:49:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011450201_pi300-10000_cl_pass1_src13.csv
[Thu Dec 29 02:49:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011450201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011450201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 02:49:20 2011] fullrun_mos2_xmm0011450201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu Dec 29 02:49:20 2011] fullrun_mos2_xmm0011450201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Dec 29 02:49:20 2011] Fit fullrun_mos2_xmm0011450201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Thu Dec 29 02:49:53 2011] Source 5 is offset by 7.141014 and 6.285873 pixels which is larger than
2 X fitted extent = 1.492671 x 1.492671, not incorporating fit results
[Thu Dec 29 02:49:53 2011] Warning, spatial fit 13 centroid is now closest to src. 4
[Thu Dec 29 02:49:53 2011] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 18.269059 pixels away
[Thu Dec 29 02:49:53 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 02:49:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 02:49:53 2011] Assessing source extent using major
[Thu Dec 29 02:49:53 2011] Source does appear to be extended
[Thu Dec 29 02:49:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 16:04:46 2012] XMMSAS src. selection expression = ellipse(41805.456177, 33550.770966, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jan  1 16:04:46 2012] Writing source region out to fullrun_mos2_xmm0011450201_pi300-10000_pass1_cl_src5_src.reg
[Sun Jan  1 16:04:46 2012] Extracting stamp from image fullrun_mos2_xmm0011450201_pi300-10000_cl_sm2.00.img.gz, (444, 349) - (519, 424)
[Sun Jan  1 16:04:46 2012] XMMSAS bgd. selection expression = annulus(41805.456177, 33550.770966, 1087.500000, 2175.000000, X, Y) && !ellipse(37955.846000, 31373.450000, 3931.056113, 3931.056113, 0.000000, X, Y) && !ellipse(38203.390000, 31431.612000, 1839.808053, 1839.808053, 0.000000, X, Y) && !ellipse(40161.015991, 32594.601990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39186.576000, 32258.090000, 1965.528057, 1965.528057, 0.000000, X, Y) && !ellipse(37170.978000, 31001.742000, 3631.728105, 3631.728105, 0.000000, X, Y) && !ellipse(42294.026703, 33862.986481, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jan  1 16:04:46 2012] Writing fullrun_mos2_xmm0011450201_pi300-10000_pass1_cl_src5.gif
[Sun Jan  1 16:37:37 2012] Mean detx,y = (-98.03, 15912.82) 
[Sun Jan  1 16:37:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 16:38:16 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 16:38:17 2012] Setting source spectrum file to fullrun_mos2_xmm0011450201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jan  1 16:38:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0011450201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jan  1 17:39:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jan  1 17:39:23 2012] rmf not generated due to insufficient counts
[Sun Jan  1 18:02:40 2012] Updating aperture counts using extracted products
[Sun Jan  1 18:02:40 2012] Error reading totcts from fullrun_mos2_xmm0011450201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jan  1 18:02:42 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 18:02:42 2012] Using photon index=1.80, rate=0.00258, arf fullrun_mos2_xmm0011450201_pi300-10000_pass1_cl_src5.arf
[Sun Jan  1 18:02:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 18:02:42 2012] Updating source flux to 8.6e-14
[Sun Jan  1 18:08:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting