[Mon Dec 26 12:24:07 2011] Detection parameters:
  Position = (357.3, 452.0) = 1 16 29.15 -73 15 10.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.1 +/- 13.0
  Background counts = 20.5
  Rate = 0.002 +/- 0.0003

[Mon Dec 26 12:24:10 2011] Off-axis axis estimate = 11.92'
[Mon Dec 26 23:05:13 2011] Using EEF radius (= 12.39 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 23:05:13 2011] Initial guess for spatial extent in simple fitting = 12.39"
[Mon Dec 26 23:05:13 2011] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.936
[Mon Dec 26 23:05:13 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 12.39"
[Tue Dec 27 02:49:03 2011] fullrun_mos2_xmm0011450201_pi300-10000_cl_pass0_src17.ximg exists
[Tue Dec 27 02:49:03 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0011450201_pi300-10000_cl_pass0_src17.csv
[Tue Dec 27 02:49:03 2011] fullrun_mos2_xmm0011450201_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue Dec 27 02:49:03 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0011450201_pi300-10000_cl_pass0_src17.csv
[Tue Dec 27 02:49:03 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011450201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011450201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 02:49:04 2011] fullrun_mos2_xmm0011450201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue Dec 27 02:49:04 2011] fullrun_mos2_xmm0011450201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue Dec 27 02:49:04 2011] Fit fullrun_mos2_xmm0011450201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Tue Dec 27 02:49:35 2011] Warning, spatial fit 17 centroid is now closest to src. 2
[Tue Dec 27 02:49:35 2011] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.154955 pixels away
[Tue Dec 27 02:49:35 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 02:49:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 02:49:35 2011] Assessing source extent using major
[Tue Dec 27 02:49:35 2011] Source does appear to be extended
[Tue Dec 27 02:49:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 02:49:35 2011] Source is confused with source 2
[Thu Dec 29 00:21:49 2011] Using EEF radius (= 12.39 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 00:21:49 2011] Initial guess for spatial extent in simple fitting = 12.39"
[Thu Dec 29 00:21:49 2011] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.936
[Thu Dec 29 00:21:49 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 12.39"
[Thu Dec 29 02:49:19 2011] fullrun_mos2_xmm0011450201_pi300-10000_cl_pass1_src14.ximg exists
[Thu Dec 29 02:49:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011450201_pi300-10000_cl_pass1_src14.csv
[Thu Dec 29 02:49:19 2011] fullrun_mos2_xmm0011450201_pi300-10000_cl_pass1_src14_1.ximg exists
[Thu Dec 29 02:49:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011450201_pi300-10000_cl_pass1_src14.csv
[Thu Dec 29 02:49:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011450201_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011450201_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 02:49:20 2011] fullrun_mos2_xmm0011450201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Thu Dec 29 02:49:20 2011] fullrun_mos2_xmm0011450201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Thu Dec 29 02:49:20 2011] Fit fullrun_mos2_xmm0011450201_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Thu Dec 29 02:49:53 2011] Spatial fit model total counts = 355.995000, observed total counts = 356.000000
[Thu Dec 29 02:49:53 2011] Offset between fit and detection position for source 3 = 0.379083 pixels
[Thu Dec 29 02:49:53 2011] 367.345800 total counts/ 326.989000 bgd. counts: snr = 2.231774
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.379083 pixels
  Position = (357.0, 451.8) = 1 16 29.47 -73 15 12.0
  Extent = 4.2 (3.1-5.6)", rotation angle = 0
  Source counts = 40.4 +/- 19.2
  Background counts = 327.0
  Rate = 0.001 +/- 0.0005
[Thu Dec 29 02:49:53 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 02:49:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 02:49:53 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 02:49:53 2011] Source does appear to be extended
[Thu Dec 29 02:49:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 16:04:46 2012] XMMSAS src. selection expression = ellipse(31009.168000, 39259.709200, 250.268407, 250.268407, 0.000000, X, Y)
[Sun Jan  1 16:04:46 2012] Writing source region out to fullrun_mos2_xmm0011450201_pi300-10000_pass1_cl_src3_src.reg
[Sun Jan  1 16:04:46 2012] Extracting stamp from image fullrun_mos2_xmm0011450201_pi300-10000_cl_sm2.00.img.gz, (343, 437) - (371, 466)
[Sun Jan  1 16:04:46 2012] XMMSAS bgd. selection expression = annulus(31009.168000, 39259.709200, 417.114012, 834.228024, X, Y) && !ellipse(31206.398682, 39732.029633, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jan  1 16:04:46 2012] Writing fullrun_mos2_xmm0011450201_pi300-10000_pass1_cl_src3.gif
[Sun Jan  1 16:38:23 2012] Mean detx,y = (10207.50, 9441.41) 
[Sun Jan  1 16:38:26 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 16:38:38 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 16:38:39 2012] Setting source spectrum file to fullrun_mos2_xmm0011450201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jan  1 16:38:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0011450201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jan  1 17:39:44 2012] Not generating rmf since there are only 40 counts
[Sun Jan  1 17:39:44 2012] rmf not generated due to insufficient counts
[Sun Jan  1 18:02:40 2012] Updating aperture counts using extracted products
[Sun Jan  1 18:02:40 2012] Error reading totcts from fullrun_mos2_xmm0011450201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jan  1 18:02:42 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 18:02:42 2012] Using photon index=1.80, rate=0.00101, arf fullrun_mos2_xmm0011450201_pi300-10000_pass1_cl_src3.arf
[Sun Jan  1 18:02:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 18:02:42 2012] Updating source flux to 4.5e-14
[Sun Jan  1 18:08:08 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Sun Jan  1 18:08:08 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting