[Mon Dec 26 12:24:10 2011] Detection parameters:
  Position = (405.0, 180.1) = 1 15 39.05 -73 34 52.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.3 +/- 12.2
  Background counts = 25.9
  Rate = 0.002 +/- 0.0003

[Mon Dec 26 12:24:10 2011] Off-axis axis estimate = 11.55'
[Mon Dec 26 23:05:13 2011] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 23:05:13 2011] Initial guess for spatial extent in simple fitting = 12.20"
[Mon Dec 26 23:05:13 2011] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.824
[Mon Dec 26 23:05:13 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 12.20"
[Tue Dec 27 02:49:03 2011] fullrun_mos2_xmm0011450201_pi300-10000_cl_pass0_src26.ximg exists
[Tue Dec 27 02:49:03 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0011450201_pi300-10000_cl_pass0_src26.csv
[Tue Dec 27 02:49:03 2011] fullrun_mos2_xmm0011450201_pi300-10000_cl_pass0_src26_1.ximg exists
[Tue Dec 27 02:49:03 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0011450201_pi300-10000_cl_pass0_src26.csv
[Tue Dec 27 02:49:03 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011450201_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011450201_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 02:49:04 2011] fullrun_mos2_xmm0011450201_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Tue Dec 27 02:49:04 2011] fullrun_mos2_xmm0011450201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Tue Dec 27 02:49:04 2011] Fit fullrun_mos2_xmm0011450201_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Tue Dec 27 02:49:35 2011] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 15.837272 pixels away
[Tue Dec 27 02:49:35 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 02:49:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 02:49:35 2011] Assessing source extent using major
[Tue Dec 27 02:49:35 2011] Source does appear to be extended
[Tue Dec 27 02:49:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 00:21:49 2011] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 00:21:49 2011] Initial guess for spatial extent in simple fitting = 12.20"
[Thu Dec 29 00:21:49 2011] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.824
[Thu Dec 29 00:21:49 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 12.20"
[Thu Dec 29 02:49:19 2011] fullrun_mos2_xmm0011450201_pi300-10000_cl_pass1_src23.ximg exists
[Thu Dec 29 02:49:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011450201_pi300-10000_cl_pass1_src23.csv
[Thu Dec 29 02:49:19 2011] fullrun_mos2_xmm0011450201_pi300-10000_cl_pass1_src23_1.ximg exists
[Thu Dec 29 02:49:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011450201_pi300-10000_cl_pass1_src23.csv
[Thu Dec 29 02:49:19 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011450201_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011450201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 02:49:20 2011] fullrun_mos2_xmm0011450201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Thu Dec 29 02:49:20 2011] fullrun_mos2_xmm0011450201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Thu Dec 29 02:49:20 2011] Fit fullrun_mos2_xmm0011450201_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Thu Dec 29 02:49:53 2011] Spatial fit model total counts = 323.999000, observed total counts = 324.000000
[Thu Dec 29 02:49:53 2011] Offset between fit and detection position for source 25 = 0.344370 pixels
[Thu Dec 29 02:49:53 2011] 334.429200 total counts/ 291.523000 bgd. counts: snr = 2.512949
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.344370 pixels
  Position = (404.7, 180.0) = 1 15 39.40 -73 34 53.3
  Extent = 5.4 (4.0-8.7)", rotation angle = 0
  Source counts = 42.9 +/- 18.3
  Background counts = 291.5
  Rate = 0.001 +/- 0.0005
[Thu Dec 29 02:49:53 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 02:49:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 02:49:53 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 02:49:53 2011] Source does appear to be extended
[Thu Dec 29 02:49:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 16:04:46 2012] XMMSAS src. selection expression = ellipse(35158.372800, 15608.333800, 322.276809, 322.276809, 0.000000, X, Y)
[Sun Jan  1 16:04:46 2012] Writing source region out to fullrun_mos2_xmm0011450201_pi300-10000_pass1_cl_src25_src.reg
[Sun Jan  1 16:04:46 2012] Extracting stamp from image fullrun_mos2_xmm0011450201_pi300-10000_cl_sm2.00.img.gz, (386, 161) - (423, 198)
[Sun Jan  1 16:04:46 2012] XMMSAS bgd. selection expression = annulus(35158.372800, 15608.333800, 537.128015, 1074.256031, X, Y)
[Sun Jan  1 16:04:46 2012] Writing fullrun_mos2_xmm0011450201_pi300-10000_pass1_cl_src25.gif
[Sun Jan  1 16:58:42 2012] Mean detx,y = (-12358.41, 1243.09) 
[Sun Jan  1 16:58:44 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 16:58:58 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 16:58:58 2012] Setting source spectrum file to fullrun_mos2_xmm0011450201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun Jan  1 16:58:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0011450201_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sun Jan  1 17:54:32 2012] Not generating rmf since there are only 42 counts
[Sun Jan  1 17:54:32 2012] rmf not generated due to insufficient counts
[Sun Jan  1 18:02:40 2012] Updating aperture counts using extracted products
[Sun Jan  1 18:02:41 2012] Error reading totcts from fullrun_mos2_xmm0011450201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun Jan  1 18:02:43 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 18:02:43 2012] Using photon index=1.80, rate=0.00107, arf fullrun_mos2_xmm0011450201_pi300-10000_pass1_cl_src25.arf
[Sun Jan  1 18:02:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 18:02:43 2012] Updating source flux to 2.5e-14
[Sun Jan  1 18:08:08 2012] Source 25 has fewer than 100.000000 counts, skipping spectral fitting