[Mon Dec 26 12:22:53 2011] Detection parameters:
  Position = (478.3, 387.0) = 1 14 26.52 -73 19 46.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.4 +/- 12.9
  Background counts = 21.8
  Rate = 0.002 +/- 0.0003

[Mon Dec 26 12:22:56 2011] Off-axis axis estimate = 14.54'
[Mon Dec 26 19:37:17 2011] Using EEF radius (= 13.70 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 19:37:17 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 26 19:37:17 2011] Initial guess for spatial extent in simple fitting = 13.70"
[Mon Dec 26 19:37:17 2011] source mask rpix=3.1, npix_max = 53, mask sum = 56, frac = 1.052
[Mon Dec 26 19:37:17 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 13.70"
[Mon Dec 26 23:05:11 2011] fullrun_mos1_xmm0011450201_pi300-10000_cl_pass0_src29.ximg exists
[Mon Dec 26 23:05:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011450201_pi300-10000_cl_pass0_src29.csv
[Mon Dec 26 23:05:11 2011] fullrun_mos1_xmm0011450201_pi300-10000_cl_pass0_src29_1.ximg exists
[Mon Dec 26 23:05:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011450201_pi300-10000_cl_pass0_src29.csv
[Mon Dec 26 23:05:11 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011450201_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011450201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 23:05:12 2011] fullrun_mos1_xmm0011450201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Mon Dec 26 23:05:12 2011] fullrun_mos1_xmm0011450201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Dec 26 23:05:12 2011] Fit fullrun_mos1_xmm0011450201_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Tue Dec 27 02:49:24 2011] Warning, spatial fit 29 centroid is now closest to src. 8
[Tue Dec 27 02:49:24 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 02:49:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 02:49:24 2011] Assessing source extent using major
[Tue Dec 27 02:49:24 2011] Source does appear to be extended
[Tue Dec 27 02:49:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 02:49:24 2011] Source is confused with source 7
[Wed Dec 28 20:26:41 2011] Using EEF radius (= 13.70 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 20:26:41 2011] Initial guess for spatial extent in simple fitting = 13.70"
[Wed Dec 28 20:26:41 2011] source mask rpix=3.1, npix_max = 53, mask sum = 56, frac = 1.052
[Wed Dec 28 20:26:41 2011] Giving source the simple spatial ID 27 for pass 1, mean size = 13.70"
[Thu Dec 29 00:21:47 2011] fullrun_mos1_xmm0011450201_pi300-10000_cl_pass1_src27.ximg exists
[Thu Dec 29 00:21:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011450201_pi300-10000_cl_pass1_src27.csv
[Thu Dec 29 00:21:47 2011] fullrun_mos1_xmm0011450201_pi300-10000_cl_pass1_src27_1.ximg exists
[Thu Dec 29 00:21:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011450201_pi300-10000_cl_pass1_src27.csv
[Thu Dec 29 00:21:47 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011450201_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011450201_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 00:21:48 2011] fullrun_mos1_xmm0011450201_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Thu Dec 29 00:21:48 2011] fullrun_mos1_xmm0011450201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Thu Dec 29 00:21:48 2011] Fit fullrun_mos1_xmm0011450201_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Thu Dec 29 02:49:43 2011] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 34.101635 pixels away
[Thu Dec 29 02:49:43 2011] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 16.862140 pixels away
[Thu Dec 29 02:49:43 2011] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 29.264020 pixels away
[Thu Dec 29 02:49:43 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 02:49:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 02:49:43 2011] Assessing source extent using major
[Thu Dec 29 02:49:43 2011] Source does appear to be extended
[Thu Dec 29 02:49:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 14:12:24 2012] XMMSAS src. selection expression = ellipse(41567.302704, 33620.287598, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jan  1 14:12:24 2012] Writing source region out to fullrun_mos1_xmm0011450201_pi300-10000_pass1_cl_src6_src.reg
[Sun Jan  1 14:12:24 2012] Extracting stamp from image fullrun_mos1_xmm0011450201_pi300-10000_cl_sm2.00.img.gz, (441, 349) - (516, 424)
[Sun Jan  1 14:12:24 2012] XMMSAS bgd. selection expression = annulus(41567.302704, 33620.287598, 1087.500000, 2175.000000, X, Y) && !ellipse(37131.660000, 30899.216000, 3775.408109, 3775.408109, 0.000000, X, Y) && !ellipse(39413.291324, 32320.587999, 1155.519178, 678.999047, -0.000000, X, Y) && !ellipse(38279.486000, 31588.262200, 1887.704054, 1887.704054, 0.000000, X, Y) && !ellipse(40087.562000, 32610.594000, 1792.240052, 1792.240052, 0.000000, X, Y) && !ellipse(40651.458000, 33110.092000, 2081.224060, 2081.224060, 0.000000, X, Y)
[Sun Jan  1 14:12:24 2012] Writing fullrun_mos1_xmm0011450201_pi300-10000_pass1_cl_src6.gif
[Sun Jan  1 14:34:59 2012] Mean detx,y = (15983.33, -120.34) 
[Sun Jan  1 14:35:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 14:35:34 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 14:35:34 2012] Setting source spectrum file to fullrun_mos1_xmm0011450201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jan  1 14:35:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0011450201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Jan  1 15:42:40 2012] Not generating rmf since there are only 67 counts
[Sun Jan  1 15:42:40 2012] rmf not generated due to insufficient counts
[Sun Jan  1 18:02:35 2012] Updating aperture counts using extracted products
[Sun Jan  1 18:02:35 2012] Error reading totcts from fullrun_mos1_xmm0011450201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jan  1 18:02:37 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 18:02:37 2012] Using photon index=1.80, rate=0.00166, arf fullrun_mos1_xmm0011450201_pi300-10000_pass1_cl_src6.arf
[Sun Jan  1 18:02:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 18:02:37 2012] Updating source flux to 4.3e-14
[Sun Jan  1 18:02:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting