[Mon Dec 26 12:22:54 2011] Detection parameters:
  Position = (169.5, 280.8) = 1 19 39.70 -73 27 33.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.7 +/- 14.6
  Background counts = 20.9
  Rate = 0.003 +/- 0.0004

[Mon Dec 26 12:22:56 2011] Off-axis axis estimate = 9.43'
[Mon Dec 26 19:37:17 2011] Using EEF radius (= 11.14 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 19:37:17 2011] Initial guess for spatial extent in simple fitting = 11.14"
[Mon Dec 26 19:37:17 2011] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.120
[Mon Dec 26 19:37:17 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 11.14"
[Mon Dec 26 23:05:11 2011] fullrun_mos1_xmm0011450201_pi300-10000_cl_pass0_src12.ximg exists
[Mon Dec 26 23:05:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011450201_pi300-10000_cl_pass0_src12.csv
[Mon Dec 26 23:05:11 2011] fullrun_mos1_xmm0011450201_pi300-10000_cl_pass0_src12_1.ximg exists
[Mon Dec 26 23:05:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011450201_pi300-10000_cl_pass0_src12.csv
[Mon Dec 26 23:05:11 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011450201_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011450201_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 23:05:11 2011] fullrun_mos1_xmm0011450201_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Mon Dec 26 23:05:11 2011] fullrun_mos1_xmm0011450201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Mon Dec 26 23:05:11 2011] Fit fullrun_mos1_xmm0011450201_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Tue Dec 27 02:49:24 2011] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 13.293935 pixels away
[Tue Dec 27 02:49:24 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 02:49:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 02:49:24 2011] Assessing source extent using major
[Tue Dec 27 02:49:24 2011] Source does appear to be extended
[Tue Dec 27 02:49:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 20:26:41 2011] Using EEF radius (= 11.14 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 20:26:41 2011] Initial guess for spatial extent in simple fitting = 11.14"
[Wed Dec 28 20:26:41 2011] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.120
[Wed Dec 28 20:26:41 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 11.14"
[Thu Dec 29 00:21:47 2011] fullrun_mos1_xmm0011450201_pi300-10000_cl_pass1_src12.ximg exists
[Thu Dec 29 00:21:47 2011] fullrun_mos1_xmm0011450201_pi300-10000_cl_pass1_src12_1.ximg exists
[Thu Dec 29 00:21:47 2011] Fit fullrun_mos1_xmm0011450201_pi300-10000_cl_pass1_src12 appears to have run properly
[Thu Dec 29 00:21:47 2011] fullrun_mos1_xmm0011450201_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Thu Dec 29 00:21:47 2011] fullrun_mos1_xmm0011450201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Thu Dec 29 00:21:47 2011] Fit fullrun_mos1_xmm0011450201_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Thu Dec 29 02:49:43 2011] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 14.996433 pixels away
[Thu Dec 29 02:49:43 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 02:49:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 02:49:43 2011] Assessing source extent using major
[Thu Dec 29 02:49:43 2011] Source does appear to be extended
[Thu Dec 29 02:49:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 14:12:24 2012] XMMSAS src. selection expression = ellipse(14700.763885, 24383.278717, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jan  1 14:12:24 2012] Writing source region out to fullrun_mos1_xmm0011450201_pi300-10000_pass1_cl_src23_src.reg
[Sun Jan  1 14:12:24 2012] Extracting stamp from image fullrun_mos1_xmm0011450201_pi300-10000_cl_sm2.00.img.gz, (132, 243) - (207, 318)
[Sun Jan  1 14:12:24 2012] XMMSAS bgd. selection expression = annulus(14700.763885, 24383.278717, 1087.500000, 2175.000000, X, Y) && !ellipse(17507.268060, 26769.867000, 913.192026, 393.554411, 340.673479, X, Y)
[Sun Jan  1 14:12:24 2012] Writing fullrun_mos1_xmm0011450201_pi300-10000_pass1_cl_src23.gif
[Sun Jan  1 14:19:59 2012] Mean detx,y = (-11876.89, -5668.76) 
[Sun Jan  1 14:20:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 14:20:50 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 14:20:51 2012] Setting source spectrum file to fullrun_mos1_xmm0011450201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sun Jan  1 14:20:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0011450201_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sun Jan  1 15:06:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jan  1 15:06:45 2012] rmf not generated due to insufficient counts
[Sun Jan  1 18:02:33 2012] Updating aperture counts using extracted products
[Sun Jan  1 18:02:33 2012] Error reading totcts from fullrun_mos1_xmm0011450201_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sun Jan  1 18:02:36 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 18:02:36 2012] Using photon index=1.80, rate=0.0032, arf fullrun_mos1_xmm0011450201_pi300-10000_pass1_cl_src23.arf
[Sun Jan  1 18:02:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 18:02:36 2012] Updating source flux to 7.1e-14
[Sun Jan  1 18:02:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting