[Mon Dec 26 12:22:54 2011] Detection parameters:
  Position = (418.8, 350.5) = 1 15 26.40 -73 22 32.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.0 +/- 13.2
  Background counts = 37.0
  Rate = 0.002 +/- 0.0006

[Mon Dec 26 12:22:56 2011] Off-axis axis estimate = 9.51'
[Mon Dec 26 19:37:17 2011] Using EEF radius (= 11.18 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 19:37:17 2011] Initial guess for spatial extent in simple fitting = 11.18"
[Mon Dec 26 19:37:17 2011] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.114
[Mon Dec 26 19:37:17 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 11.18"
[Mon Dec 26 23:05:11 2011] fullrun_mos1_xmm0011450201_pi300-10000_cl_pass0_src19.ximg exists
[Mon Dec 26 23:05:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011450201_pi300-10000_cl_pass0_src19.csv
[Mon Dec 26 23:05:11 2011] fullrun_mos1_xmm0011450201_pi300-10000_cl_pass0_src19_1.ximg exists
[Mon Dec 26 23:05:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011450201_pi300-10000_cl_pass0_src19.csv
[Mon Dec 26 23:05:11 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011450201_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011450201_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 23:05:12 2011] fullrun_mos1_xmm0011450201_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Mon Dec 26 23:05:12 2011] fullrun_mos1_xmm0011450201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Mon Dec 26 23:05:12 2011] Fit fullrun_mos1_xmm0011450201_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Tue Dec 27 02:49:24 2011] Spatial fit model total counts = 609.211000, observed total counts = 607.000000
[Tue Dec 27 02:49:24 2011] Offset between fit and detection position for source 15 = 1.460230 pixels
[Tue Dec 27 02:49:24 2011] Warning, changing simple spatial fit ID from 19 to 10
[Tue Dec 27 02:49:24 2011] 597.136210 total counts/ 594.766000 bgd. counts: snr = 0.097188
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 1.460230 pixels
  Position = (419.9, 351.4) = 1 15 25.24 -73 22 27.1
  Extent = 2.7" x 2.7", rotation angle = 0
  Source counts = 2.4 +/- 24.4
  Background counts = 594.8
  Rate = 6e-05 +/- 0.0006
  Deleting source due to low Poisson probability