[Thu Jul 26 10:45:39 2012] Detection parameters:
  Position = (364.0, 387.1) = 1 15 35.68 -73 19 50.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 813.0 +/- 40.3
  Background counts = 123.3
  Rate = 0.01 +/- 0.0007

[Thu Jul 26 10:45:41 2012] Off-axis axis estimate = 8.00'
[Thu Jul 26 10:51:20 2012] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 10:51:20 2012] Initial guess for spatial extent in simple fitting = 10.43"
[Thu Jul 26 10:51:20 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.072
[Thu Jul 26 10:51:20 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 10.43"
[Thu Jul 26 13:58:01 2012] fullrun_pn_xmm0011450101_pi300-10000_cl_pass0_src6.ximg exists
[Thu Jul 26 13:58:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011450101_pi300-10000_cl_pass0_src6.csv
[Thu Jul 26 13:58:01 2012] fullrun_pn_xmm0011450101_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Jul 26 13:58:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011450101_pi300-10000_cl_pass0_src6.csv
[Thu Jul 26 13:58:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0011450101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0011450101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 13:58:01 2012] fullrun_pn_xmm0011450101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Jul 26 13:58:01 2012] fullrun_pn_xmm0011450101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Jul 26 13:58:01 2012] Fit fullrun_pn_xmm0011450101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Thu Jul 26 18:46:10 2012] Spatial fit model total counts = 3337.820000, observed total counts = 3323.000000
[Thu Jul 26 18:46:10 2012] Offset between fit and detection position for source 6 = 0.627692 pixels
[Thu Jul 26 18:46:10 2012] Warning, changing simple spatial fit ID from 6 to 5
[Thu Jul 26 18:46:10 2012] 3744.295000 total counts/ 673.345000 bgd. counts: snr = 118.346093
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.627692 pixels
  Position = (363.8, 387.7) = 1 15 35.88 -73 19 48.2
  Extent = 21.4 (21.4-42.8)", rotation angle = 0
  Source counts = 3070.9 +/- 61.2
  Background counts = 673.3
  Rate = 0.07 +/- 0.001
[Thu Jul 26 18:46:10 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 18:46:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 18:46:10 2012] Assessing source extent using major axis lower bound
[Thu Jul 26 18:46:10 2012] Source does appear to be extended
[Thu Jul 26 18:46:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 18:46:10 2012] Source is confused with source 5
[Thu Jul 26 18:46:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 26 18:46:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 26 18:46:28 2012] Initial guess for spatial extent in simple fitting = 21.42"
[Thu Jul 26 18:46:28 2012] source mask rpix=4.9, npix_max = 117, mask sum = 121, frac = 1.028
[Thu Jul 26 18:46:28 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 21.42"
[Thu Jul 26 23:18:41 2012] fullrun_pn_xmm0011450101_pi300-10000_cl_pass1_src5.ximg exists
[Thu Jul 26 23:18:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011450101_pi300-10000_cl_pass1_src5.csv
[Thu Jul 26 23:18:41 2012] fullrun_pn_xmm0011450101_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Jul 26 23:18:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011450101_pi300-10000_cl_pass1_src5.csv
[Thu Jul 26 23:18:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0011450101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0011450101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 23:18:42 2012] fullrun_pn_xmm0011450101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Jul 26 23:18:42 2012] fullrun_pn_xmm0011450101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jul 26 23:18:42 2012] Fit fullrun_pn_xmm0011450101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Jul 27 04:16:23 2012] Warning, spatial fit 5 centroid is now closest to src. 8
[Fri Jul 27 04:16:24 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 04:16:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 04:16:24 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 04:16:24 2012] Source does appear to be extended
[Fri Jul 27 04:16:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 04:16:39 2012] Counts = 3070.950000, rescaling region sizes by 2.000000
[Fri Jul 27 04:16:39 2012] XMMSAS src. selection expression = ellipse(31604.656000, 33681.158000, 2570.208074, 2570.208074, 0.000000, X, Y)
[Fri Jul 27 04:16:39 2012] Writing source region out to fullrun_pn_xmm0011450101_pi300-10000_pass1_cl_src6_src.reg
[Fri Jul 27 04:16:39 2012] Extracting stamp from image fullrun_pn_xmm0011450101_pi300-10000_cl_sm2.00.img.gz, (216, 240) - (512, 535)
[Fri Jul 27 04:16:39 2012] XMMSAS bgd. selection expression = annulus(31604.656000, 33681.158000, 8567.360247, 17134.720493, X, Y) && !ellipse(23958.482920, 25510.815600, 2502.033266, 2502.033266, 0.000000, X, Y) && !ellipse(16004.401600, 26864.033400, 494.941614, 431.952012, 90.000000, X, Y) && !ellipse(33788.435000, 35985.434000, 1297.464037, 1297.464037, 0.000000, X, Y) && !ellipse(32221.343000, 34316.728200, 1713.472049, 501.604814, 133.203000, X, Y) && !ellipse(31135.525480, 33163.963000, 3336.480096, 579.982417, 313.296600, X, Y) && !ellipse(30517.918000, 32514.852000, 3426.944099, 3426.944099, 0.000000, X, Y) && !ellipse(30053.565400, 32014.099200, 3126.336090, 587.882417, 313.303200, X, Y) && !ellipse(29811.574000, 31737.908000, 3233.144093, 3233.144093, 0.000000, X, Y) && !ellipse(29344.586624, 31230.147572, 1352.248039, 598.257276, 132.558206, X, Y) && !ellipse(28588.888000, 30464.352000, 1352.248039, 621.096818, 132.897700, X, Y) && !ellipse(23249.427216, 24432.096741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16416.625687, 36157.492004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27125.613342, 39612.728546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23008.955280, 39467.230800, 451.251213, 451.251213, 0.000000, X, Y) && !ellipse(27037.405304, 39199.964417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30003.221710, 38104.095764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18544.922394, 36791.167847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27884.386000, 29691.390000, 2569.552074, 2569.552074, 0.000000, X, Y) && !ellipse(32599.460693, 29858.782806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33088.039180, 28738.114600, 514.949615, 514.949615, 0.000000, X, Y) && !ellipse(27179.250000, 28940.434000, 1285.248037, 1285.248037, 0.000000, X, Y) && !ellipse(40163.984314, 27994.176971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26565.960000, 28280.518000, 1542.736044, 1389.112040, 151.891000, X, Y) && !ellipse(27215.847800, 26457.217800, 1183.272034, 1183.272034, 340.811956, X, Y) && !ellipse(26828.850098, 25987.630615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21917.522476, 25768.614594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32931.772125, 25366.154633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28172.847800, 25152.217800, 1183.273406, 1183.273406, 0.000000, X, Y) && !ellipse(22436.045715, 25118.594391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21994.098000, 25083.514160, 1311.376038, 1311.376038, 0.000000, X, Y) && !ellipse(21906.131073, 24544.048706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24497.115753, 23319.729736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23697.760773, 24027.855255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25073.474823, 20985.315140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22335.828979, 18940.890808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25546.271820, 17602.494522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15239.645889, 17421.971115, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 27 04:16:39 2012] Writing fullrun_pn_xmm0011450101_pi300-10000_pass1_cl_src6.gif
[Fri Jul 27 04:42:37 2012] Mean detx,y = (139.70, 11016.69) 
[Fri Jul 27 04:42:47 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 04:50:44 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 04:50:44 2012] Setting source spectrum file to fullrun_pn_xmm0011450101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jul 27 04:50:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0011450101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Jul 27 16:57:56 2012] Updating aperture counts using extracted products
[Fri Jul 27 16:57:56 2012] Error reading totcts from fullrun_pn_xmm0011450101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jul 27 16:57:58 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 16:57:58 2012] Using photon index=1.80, rate=0.0746, arf fullrun_pn_xmm0011450101_pi300-10000_pass1_cl_src6.arf
[Fri Jul 27 16:57:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 16:57:58 2012] Updating source flux to 2.8e-13
[Fri Jul 27 17:00:57 2012] Flag c found in src. 6 procflags, skipping spectral fitting