[Thu Jul 26 10:46:31 2012] Detection parameters:
  Position = (270.4, 303.3) = 1 17 10.50 -73 26 0.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1756.9 +/- 59.9
  Background counts = 119.9
  Rate = 0.03 +/- 0.001

[Thu Jul 26 10:46:31 2012] Off-axis axis estimate = 2.06'
[Thu Jul 26 14:31:35 2012] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 14:31:35 2012] Initial guess for spatial extent in simple fitting = 7.46"
[Thu Jul 26 14:31:35 2012] source mask rpix=1.7, npix_max = 19, mask sum = 17, frac = 0.866
[Thu Jul 26 14:31:35 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.46"
[Thu Jul 26 18:45:58 2012] fullrun_mos2_xmm0011450101_pi300-10000_cl_pass0_src2.ximg exists
[Thu Jul 26 18:45:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011450101_pi300-10000_cl_pass0_src2.csv
[Thu Jul 26 18:45:58 2012] fullrun_mos2_xmm0011450101_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Jul 26 18:45:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011450101_pi300-10000_cl_pass0_src2.csv
[Thu Jul 26 18:45:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011450101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011450101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 18:45:58 2012] fullrun_mos2_xmm0011450101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Jul 26 18:45:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011450101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Jul 26 18:45:58 2012] fullrun_mos2_xmm0011450101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Jul 26 18:45:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011450101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Jul 26 18:45:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011450101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011450101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 18:46:18 2012] Source 3 is offset by -2.665236 and -1.552068 pixels which is larger than
2 X fitted extent = 6.807173 x 1.283435, not incorporating fit results
[Thu Jul 26 18:46:18 2012] Spatial fit model total counts = 12580.000000, observed total counts = 11648.000000
[Thu Jul 26 18:46:18 2012] Offset between fit and detection position for source 3 = 0.943232 pixels
[Thu Jul 26 18:46:18 2012] Warning, changing simple spatial fit ID from 2 to 4
[Thu Jul 26 18:46:18 2012] 7612.612000 total counts/ 6861.500000 bgd. counts: snr = 9.067659
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.943232 pixels
  Position = (271.0, 304.0) = 1 17 9.93 -73 25 52.6
  Extent = 15.3 (15.3-30.6)" x 15.3 (15.3-30.6)", rotation angle = 360 (359-0) degrees
  Source counts = 751.1 +/- 87.3
  Background counts = 6861.5
  Rate = 0.02 +/- 0.002
[Thu Jul 26 18:46:18 2012] Vigneting correction estimate = 1.000000
[Thu Jul 26 18:46:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 26 18:46:18 2012] Assessing source extent using major axis lower bound
[Thu Jul 26 18:46:18 2012] Source does appear to be extended
[Thu Jul 26 18:46:18 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.50
[Thu Jul 26 18:46:18 2012] Source is confused with source 2
[Fri Jul 27 00:34:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 27 00:34:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 27 00:34:57 2012] Initial guess for spatial extent in simple fitting = 15.32"
[Fri Jul 27 00:34:57 2012] source mask rpix=3.5, npix_max = 64, mask sum = 49, frac = 0.757
[Fri Jul 27 00:34:57 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 15.32"
[Fri Jul 27 04:16:12 2012] fullrun_mos2_xmm0011450101_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jul 27 04:16:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011450101_pi300-10000_cl_pass1_src2.csv
[Fri Jul 27 04:16:12 2012] fullrun_mos2_xmm0011450101_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jul 27 04:16:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011450101_pi300-10000_cl_pass1_src2.csv
[Fri Jul 27 04:16:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011450101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011450101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 04:16:12 2012] fullrun_mos2_xmm0011450101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jul 27 04:16:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011450101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jul 27 04:16:12 2012] fullrun_mos2_xmm0011450101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jul 27 04:16:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011450101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jul 27 04:16:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011450101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011450101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 04:16:30 2012] Warning, spatial fit 2 centroid is now closest to src. 2
[Fri Jul 27 04:16:30 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 04:16:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 04:16:30 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 04:16:30 2012] Source does appear to be extended
[Fri Jul 27 04:16:30 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.50
[Fri Jul 27 15:43:57 2012] XMMSAS src. selection expression = ellipse(23525.570000, 26402.184000, 919.344026, 919.344026, 359.680000, X, Y)
[Fri Jul 27 15:43:57 2012] Writing source region out to fullrun_mos2_xmm0011450101_pi300-10000_pass1_cl_src3_src.reg
[Fri Jul 27 15:43:57 2012] Extracting stamp from image fullrun_mos2_xmm0011450101_pi300-10000_cl_sm2.00.img.gz, (218, 251) - (324, 357)
[Fri Jul 27 15:43:57 2012] XMMSAS bgd. selection expression = annulus(23525.570000, 26402.184000, 1532.240044, 3064.480088, X, Y) && !ellipse(23933.450400, 25539.565000, 2756.136079, 2756.136079, 0.000000, X, Y) && !ellipse(22962.073395, 25745.122894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24241.577148, 27054.323151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22390.403107, 25186.034790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26418.258000, 25026.548600, 1081.512031, 1081.512031, 0.000000, X, Y) && !ellipse(25074.690826, 23860.668060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25582.212952, 26730.911377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22875.084015, 23787.675995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24346.687600, 28003.670000, 894.592026, 894.592026, 0.000000, X, Y)
[Fri Jul 27 15:43:57 2012] Writing fullrun_mos2_xmm0011450101_pi300-10000_pass1_cl_src3.gif
[Fri Jul 27 15:56:13 2012] Mean detx,y = (-315.86, -149.96) 
[Fri Jul 27 15:56:15 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 15:56:34 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 15:56:35 2012] Setting source spectrum file to fullrun_mos2_xmm0011450101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jul 27 15:56:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0011450101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jul 27 16:58:02 2012] Updating aperture counts using extracted products
[Fri Jul 27 16:58:02 2012] Error reading totcts from fullrun_mos2_xmm0011450101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jul 27 16:58:03 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 16:58:03 2012] Using photon index=1.80, rate=0.0155, arf fullrun_mos2_xmm0011450101_pi300-10000_pass1_cl_src3.arf
[Fri Jul 27 16:58:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 16:58:03 2012] Updating source flux to 1.4e-13
[Fri Jul 27 16:59:03 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Fri Jul 27 16:59:03 2012] Flag c found in src. 3 procflags, skipping spectral fitting