[Sun Jun 9 22:08:04 2013] Detection parameters: Position = (223.1, 184.2) = 6 41 8.85 9 41 13.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 168.0 +/- 17.8 Background counts = 32.9 Rate = 0.005 +/- 0.0005 [Sun Jun 9 22:08:07 2013] Off-axis axis estimate = 9.92' [Sun Jun 9 22:09:18 2013] Using EEF radius (= 11.39 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 22:09:18 2013] Initial guess for spatial extent in simple fitting = 11.39" [Sun Jun 9 22:09:18 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.926 [Sun Jun 9 22:09:18 2013] Giving source the simple spatial ID 85 for pass 0, mean size = 11.39" [Sun Jun 9 22:09:20 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src85.ximg exists [Sun Jun 9 22:09:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src85.csv [Sun Jun 9 22:09:20 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src85_1.ximg exists [Sun Jun 9 22:09:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src85.csv [Sun Jun 9 22:09:20 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src85_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 22:09:22 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src85.ximg exists [Sun Jun 9 22:09:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src85.csv [Sun Jun 9 22:09:22 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists [Sun Jun 9 22:09:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src85.csv [Sun Jun 9 22:09:22 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src85_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 22:09:55 2013] Warning: source 85 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 90 at 14.312748 pixels away [Sun Jun 9 22:09:55 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 22:09:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 22:09:55 2013] Assessing source extent using major [Sun Jun 9 22:09:55 2013] Source does appear to be extended [Sun Jun 9 22:09:55 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 22:10:58 2013] Using EEF radius (= 11.39 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 22:10:58 2013] Initial guess for spatial extent in simple fitting = 11.39" [Sun Jun 9 22:10:58 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.926 [Sun Jun 9 22:10:58 2013] Giving source the simple spatial ID 84 for pass 1, mean size = 11.39" [Sun Jun 9 22:11:00 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src84.ximg exists [Sun Jun 9 22:11:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src84.csv [Sun Jun 9 22:11:00 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src84_1.ximg exists [Sun Jun 9 22:11:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src84.csv [Sun Jun 9 22:11:00 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src84_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 22:11:03 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src84.ximg exists [Sun Jun 9 22:11:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src84.csv [Sun Jun 9 22:11:03 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src84_1.ximg exists [Sun Jun 9 22:11:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src84.csv [Sun Jun 9 22:11:03 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src84_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 22:11:32 2013] Warning: source 84 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 90 at 14.312748 pixels away [Sun Jun 9 22:11:32 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 22:11:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 22:11:32 2013] Assessing source extent using major [Sun Jun 9 22:11:32 2013] Source does appear to be extended [Sun Jun 9 22:11:32 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 22:12:45 2013] XMMSAS src. selection expression = ellipse(19362.012970, 15973.647324, 652.500000, 652.500000, 0.000000, X, Y) [Sun Jun 9 22:12:45 2013] Not overwriting source region fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src90_src.reg [Sun Jun 9 22:12:45 2013] Extracting stamp from image fullrun_pn_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (186, 147) - (261, 222) [Sun Jun 9 22:12:45 2013] XMMSAS bgd. selection expression = annulus(19362.012970, 15973.647324, 1087.500000, 2175.000000, X, Y) && !ellipse(22386.348877, 13704.555740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19472.717072, 17941.744873, 870.000000, 870.000000, 0.000000, X, Y) [Sun Jun 9 22:12:45 2013] Writing fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src90.gif [Sun Jun 9 22:39:41 2013] Mean detx,y = (-8155.61, 11065.00) [Sun Jun 9 22:39:43 2013] Setting backscal keywords in source and bgd. spectrum [Sun Jun 9 22:39:59 2013] Binned source spectrum to 10 counts/bin [Sun Jun 9 22:40:00 2013] Setting source spectrum file to fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src90_src_b10.pi.gz [Sun Jun 9 22:40:00 2013] Setting bgd. spectrum file to fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src90_bgd.pi.gz [Mon Jun 10 01:17:29 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon Jun 10 01:17:29 2013] rmf not generated due to insufficient counts [Mon Jun 10 07:18:51 2013] Updating aperture counts using extracted products [Mon Jun 10 07:18:51 2013] Total counts from fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src90_src_b10.pi.gz = 396.00 [Mon Jun 10 07:18:51 2013] Total counts from fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src90_bgd.pi.gz = 1521.00 [Mon Jun 10 07:18:51 2013] Got source and background scale factors 1197308.000000, 9205169.000000 [Mon Jun 10 07:18:51 2013] User source parameters: Position = (223.1, 184.2) = 6 41 8.85 9 41 13.1 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 198.2 +/- 20.9 Background aperture counts = 197.8 Rate = 0.006 +/- 0.0006 [Mon Jun 10 07:18:51 2013] Updating counts from extracted products [Mon Jun 10 07:18:51 2013] Set source signif. to 198.16/14.07 = 14.09 [Mon Jun 10 07:19:10 2013] Calculating source flux in energy range 0.30-8.00 [Mon Jun 10 07:19:10 2013] Using photon index=1.80, rate=0.0056, arf fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src90.arf [Mon Jun 10 07:19:10 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon Jun 10 07:19:10 2013] Updating source flux to 7.3e-14 [Mon Jun 10 07:20:47 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon Jun 10 07:21:23 2013] xmm0011420101/analysis//spectral/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src90_pl.csv not found, spectral fit skipped or did not complete