[Sun Jun  9 22:08:04 2013] Detection parameters:
  Position = (270.0, 317.0) = 6 40 55.07 9 50 50.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 444.2 +/- 26.6
  Background counts = 45.5
  Rate = 0.02 +/- 0.001

[Sun Jun  9 22:08:07 2013] Off-axis axis estimate = 2.46'
[Sun Jun  9 22:09:18 2013] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:18 2013] Initial guess for spatial extent in simple fitting = 7.66"
[Sun Jun  9 22:09:18 2013] source mask rpix=1.8, npix_max = 20, mask sum = 12, frac = 0.587
[Sun Jun  9 22:09:18 2013] Giving source the simple spatial ID 64 for pass 0, mean size = 7.66"
[Sun Jun  9 22:09:20 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src64.ximg exists
[Sun Jun  9 22:09:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src64.csv
[Sun Jun  9 22:09:20 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src64_1.ximg exists
[Sun Jun  9 22:09:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src64.csv
[Sun Jun  9 22:09:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src64_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:22 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Sun Jun  9 22:09:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src64.csv
[Sun Jun  9 22:09:22 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Sun Jun  9 22:09:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src64.csv
[Sun Jun  9 22:09:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src64_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:55 2013] Spatial fit model total counts = 1435.750000, observed total counts = 1013.000000
[Sun Jun  9 22:09:55 2013] Poor agreement between spatial fit and data for source 68
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  9 22:09:55 2013] Spatial fit model total counts = 1150.390000, observed total counts = 1006.000000
[Sun Jun  9 22:09:55 2013] Poor agreement between spatial fit and data for source 68
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  9 22:09:55 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:09:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:09:55 2013] Assessing source extent using major
[Sun Jun  9 22:09:55 2013] Source does appear to be extended
[Sun Jun  9 22:09:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:09:55 2013] Source is confused with source 66
[Sun Jun  9 22:10:58 2013] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:10:58 2013] Initial guess for spatial extent in simple fitting = 7.66"
[Sun Jun  9 22:10:58 2013] source mask rpix=1.8, npix_max = 20, mask sum = 12, frac = 0.587
[Sun Jun  9 22:10:58 2013] Giving source the simple spatial ID 63 for pass 1, mean size = 7.66"
[Sun Jun  9 22:11:00 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src63.ximg exists
[Sun Jun  9 22:11:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src63.csv
[Sun Jun  9 22:11:00 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src63_1.ximg exists
[Sun Jun  9 22:11:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src63.csv
[Sun Jun  9 22:11:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:01 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Sun Jun  9 22:11:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src63.csv
[Sun Jun  9 22:11:01 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Sun Jun  9 22:11:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src63.csv
[Sun Jun  9 22:11:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:32 2013] Spatial fit model total counts = 1432.860000, observed total counts = 1013.000000
[Sun Jun  9 22:11:32 2013] Poor agreement between spatial fit and data for source 68
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  9 22:11:32 2013] Warning, spatial fit 63 centroid is now closest to src. 127
[Sun Jun  9 22:11:32 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:11:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:11:32 2013] Assessing source extent using major
[Sun Jun  9 22:11:32 2013] Source does appear to be extended
[Sun Jun  9 22:11:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:12:44 2013] XMMSAS src. selection expression = ellipse(23439.070648, 27526.960846, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  9 22:12:44 2013] Not overwriting source region fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src68_src.reg
[Sun Jun  9 22:12:44 2013] Extracting stamp from image fullrun_pn_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (232, 279) - (307, 354)
[Sun Jun  9 22:12:45 2013] XMMSAS bgd. selection expression = annulus(23439.070648, 27526.960846, 1087.500000, 2175.000000, X, Y) && !ellipse(21444.448029, 29875.830750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21358.180000, 28749.448000, 294.852008, 294.852008, 0.000000, X, Y) && !ellipse(20478.123566, 30396.617401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22004.512000, 29253.120000, 277.362408, 277.362408, 0.000000, X, Y) && !ellipse(22063.219864, 28702.459137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25787.311310, 25119.029816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20773.771698, 30496.467743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23290.030579, 27925.358612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21769.436890, 27910.726746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25804.393768, 30326.455597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25063.988403, 30072.871094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22576.101166, 29627.683746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24983.716248, 29445.750519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23308.812256, 29195.346741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26439.861755, 28147.977509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22580.107605, 27902.878479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20641.378662, 27800.712952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24180.599091, 27673.584839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21218.070938, 27770.557129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24183.315186, 25263.561646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22936.316956, 24926.290619, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 22:12:45 2013] Writing fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src68.gif
[Sun Jun  9 22:26:32 2013] Mean detx,y = (-3408.28, -391.54) 
[Sun Jun  9 22:26:36 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 22:26:55 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 22:26:56 2013] Setting source spectrum file to fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Sun Jun  9 22:26:56 2013] Setting bgd. spectrum file to fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Mon Jun 10 00:43:49 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 00:43:49 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:18:46 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:18:46 2013] Total counts from fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src68_src_b10.pi.gz = 851.00
[Mon Jun 10 07:18:46 2013] Total counts from fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src68_bgd.pi.gz = 855.00
[Mon Jun 10 07:18:47 2013] Got source and background scale factors 1079320.000000, 3775765.000000
[Mon Jun 10 07:18:47 2013] User source parameters:
  Position = (270.0, 317.0) = 6 40 55.07 9 50 50.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 606.6 +/- 30.2
  Background aperture counts = 244.4
  Rate = 0.02 +/- 0.0009

[Mon Jun 10 07:18:47 2013] Updating counts from extracted products
[Mon Jun 10 07:18:47 2013] Set source signif. to 606.59/15.63 = 38.80
[Mon Jun 10 07:19:09 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:19:09 2013] Using photon index=1.80, rate=0.0172, arf fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src68.arf
[Mon Jun 10 07:19:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:19:09 2013] Updating source flux to 1.1e-13
[Mon Jun 10 07:20:47 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 07:21:23 2013] xmm0011420101/analysis//spectral/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src68_pl.csv not found, spectral fit skipped or did not complete