[Sun Jun  9 22:08:03 2013] Detection parameters:
  Position = (294.0, 355.8) = 6 40 47.99 9 53 39.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 396.9 +/- 26.4
  Background counts = 42.0
  Rate = 0.01 +/- 0.001

[Sun Jun  9 22:08:07 2013] Off-axis axis estimate = 4.17'
[Sun Jun  9 22:09:18 2013] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:18 2013] Initial guess for spatial extent in simple fitting = 8.51"
[Sun Jun  9 22:09:18 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.828
[Sun Jun  9 22:09:18 2013] Giving source the simple spatial ID 59 for pass 0, mean size = 8.51"
[Sun Jun  9 22:09:20 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src59.ximg exists
[Sun Jun  9 22:09:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src59.csv
[Sun Jun  9 22:09:20 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src59_1.ximg exists
[Sun Jun  9 22:09:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src59.csv
[Sun Jun  9 22:09:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:22 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Sun Jun  9 22:09:22 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Sun Jun  9 22:09:22 2013] Fit fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Sun Jun  9 22:09:55 2013] Warning, spatial fit 59 centroid is now closest to src. 109
[Sun Jun  9 22:09:55 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:09:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:09:55 2013] Assessing source extent using major
[Sun Jun  9 22:09:55 2013] Source does appear to be extended
[Sun Jun  9 22:09:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:09:55 2013] Source is confused with source 112
[Sun Jun  9 22:09:55 2013] Source is confused with source 115
[Sun Jun  9 22:10:58 2013] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:10:58 2013] Initial guess for spatial extent in simple fitting = 8.51"
[Sun Jun  9 22:10:58 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.828
[Sun Jun  9 22:10:58 2013] Giving source the simple spatial ID 58 for pass 1, mean size = 8.51"
[Sun Jun  9 22:10:59 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src58.ximg exists
[Sun Jun  9 22:10:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src58.csv
[Sun Jun  9 22:10:59 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src58_1.ximg exists
[Sun Jun  9 22:10:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src58.csv
[Sun Jun  9 22:10:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:01 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Sun Jun  9 22:11:01 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Sun Jun  9 22:11:01 2013] Fit fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src58 appears to have run properly
[Sun Jun  9 22:11:32 2013] Spatial fit model total counts = 986.999000, observed total counts = 987.000000
[Sun Jun  9 22:11:32 2013] Offset between fit and detection position for source 62 = 0.196470 pixels
[Sun Jun  9 22:11:32 2013] 972.073000 total counts/ 740.845000 bgd. counts: snr = 8.495261
Spatial fit parameters:
  Offset between fit and detection position for source 62 = 0.196470 pixels
  Position = (293.9, 355.7) = 6 40 48.04 9 53 38.8
  Extent = 4.5 (3.9-5.1)", rotation angle = 0
  Source counts = 231.2 +/- 31.2
  Background counts = 740.8
  Rate = 0.007 +/- 0.0009
[Sun Jun  9 22:11:32 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:11:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:11:32 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:11:32 2013] Source does appear to be extended
[Sun Jun  9 22:11:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:12:44 2013] XMMSAS src. selection expression = ellipse(25517.140320, 30895.483600, 269.035208, 269.035208, 0.000000, X, Y)
[Sun Jun  9 22:12:44 2013] Not overwriting source region fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src62_src.reg
[Sun Jun  9 22:12:44 2013] Extracting stamp from image fullrun_pn_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (278, 340) - (309, 371)
[Sun Jun  9 22:12:44 2013] XMMSAS bgd. selection expression = annulus(25517.140320, 30895.483600, 448.392013, 896.784026, X, Y) && !ellipse(24796.791565, 32429.889282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25929.821800, 31810.920400, 322.124009, 322.124009, 0.000000, X, Y) && !ellipse(25649.130310, 31343.812378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27187.717133, 31074.297699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25804.393768, 30326.455597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25063.988403, 30072.871094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24983.716248, 29445.750519, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 22:12:44 2013] Writing fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src62.gif
[Sun Jun  9 22:22:36 2013] Mean detx,y = (-1186.04, -3510.17) 
[Sun Jun  9 22:22:39 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 22:22:52 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 22:22:52 2013] Setting source spectrum file to fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Sun Jun  9 22:22:52 2013] Setting bgd. spectrum file to fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Mon Jun 10 07:18:45 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:18:45 2013] Total counts from fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src62_src_b10.pi.gz = 317.00
[Mon Jun 10 07:18:45 2013] Total counts from fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src62_bgd.pi.gz = 23.00
[Mon Jun 10 07:18:45 2013] Got source and background scale factors 228800.000000, 70938.000000
[Mon Jun 10 07:18:45 2013] User source parameters:
  Position = (293.9, 355.7) = 6 40 48.04 9 53 38.8
  Extent = 4.5 (3.9-5.1)", rotation angle = 0
  Source aperture counts = 242.8 +/- 18.8
  Background aperture counts = 74.2
  Rate = 0.007 +/- 0.0005

[Mon Jun 10 07:19:09 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:19:09 2013] Using photon index=1.80, rate=0.00654, arf fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src62.arf
[Mon Jun 10 07:19:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:19:09 2013] Updating source flux to 5.2e-14
[Mon Jun 10 07:20:47 2013] Flag c found in src. 62 procflags, skipping spectral fitting
[Mon Jun 10 07:21:23 2013] xmm0011420101/analysis//spectral/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src62_pl.csv not found, spectral fit skipped or did not complete