[Sun Jun  9 22:08:01 2013] Detection parameters:
  Position = (265.6, 362.8) = 6 40 56.36 9 54 10.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6524.5 +/- 99.4
  Background counts = 41.6
  Rate = 0.3 +/- 0.004

[Sun Jun  9 22:08:07 2013] Off-axis axis estimate = 5.24'
[Sun Jun  9 22:09:18 2013] Using EEF radius (= 9.05 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:18 2013] Initial guess for spatial extent in simple fitting = 9.05"
[Sun Jun  9 22:09:18 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.939
[Sun Jun  9 22:09:18 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 9.05"
[Sun Jun  9 22:09:19 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src6.ximg exists
[Sun Jun  9 22:09:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src6.csv
[Sun Jun  9 22:09:19 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Jun  9 22:09:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src6.csv
[Sun Jun  9 22:09:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:20 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Jun  9 22:09:20 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Jun  9 22:09:20 2013] Fit fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Jun  9 22:09:55 2013] Warning, spatial fit 6 centroid is now closest to src. 2
[Sun Jun  9 22:09:55 2013] Source 6 is offset by 0.655932 and -8.228503 pixels which is larger than
2 X fitted extent = 1.118147 x 1.118147, not incorporating fit results
[Sun Jun  9 22:09:55 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:09:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:09:55 2013] Assessing source extent using major
[Sun Jun  9 22:09:55 2013] Source does appear to be extended
[Sun Jun  9 22:09:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:10:58 2013] Using EEF radius (= 9.05 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:10:58 2013] Initial guess for spatial extent in simple fitting = 9.05"
[Sun Jun  9 22:10:58 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.939
[Sun Jun  9 22:10:58 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 9.05"
[Sun Jun  9 22:10:59 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src5.ximg exists
[Sun Jun  9 22:10:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src5.csv
[Sun Jun  9 22:10:59 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Jun  9 22:10:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src5.csv
[Sun Jun  9 22:10:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:00 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Jun  9 22:11:00 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Jun  9 22:11:00 2013] Fit fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Jun  9 22:11:32 2013] Source 6 is offset by 7.495725 and 5.916416 pixels which is larger than
2 X fitted extent = 2.070391 x 2.070391, not incorporating fit results
[Sun Jun  9 22:11:32 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:11:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:11:32 2013] Assessing source extent using major
[Sun Jun  9 22:11:32 2013] Source does appear to be extended
[Sun Jun  9 22:11:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:12:42 2013] Counts = 6524.524414, rescaling region sizes by 2.000000
[Sun Jun  9 22:12:42 2013] XMMSAS src. selection expression = ellipse(23058.796112, 31517.390228, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun  9 22:12:42 2013] Not overwriting source region fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src6_src.reg
[Sun Jun  9 22:12:42 2013] Extracting stamp from image fullrun_pn_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (191, 288) - (341, 438)
[Sun Jun  9 22:12:42 2013] XMMSAS bgd. selection expression = annulus(23058.796112, 31517.390228, 4350.000000, 8700.000000, X, Y) && !ellipse(26124.544300, 25657.361600, 419.108812, 419.108812, 0.000000, X, Y) && !ellipse(22404.529000, 30998.604540, 1296.187237, 1296.187237, 0.000000, X, Y) && !ellipse(18126.009600, 32718.554000, 392.036811, 392.036811, 0.000000, X, Y) && !ellipse(28678.064728, 32476.827545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27601.293701, 30048.128876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21444.448029, 29875.830750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21358.180000, 28749.448000, 294.852008, 294.852008, 0.000000, X, Y) && !ellipse(21508.275220, 24555.894000, 430.128012, 430.128012, 0.000000, X, Y) && !ellipse(28770.752000, 23442.819600, 687.908820, 687.908820, 0.000000, X, Y) && !ellipse(22209.045023, 32902.180748, 368.231303, 293.606872, 114.855897, X, Y) && !ellipse(21593.182770, 39274.870758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20943.986954, 39209.870331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32165.289800, 36808.779400, 584.963217, 420.612012, 5.635636, X, Y) && !ellipse(21961.719138, 37106.375600, 502.331214, 502.331214, 0.000000, X, Y) && !ellipse(20867.257935, 36286.860962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26511.696228, 35799.185181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22660.650000, 34301.474000, 353.573610, 353.573610, 0.000000, X, Y) && !ellipse(19247.628998, 33887.925171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20478.123566, 30396.617401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18256.078000, 29675.599600, 564.410416, 564.410416, 0.000000, X, Y) && !ellipse(22004.512000, 29253.120000, 277.362408, 277.362408, 0.000000, X, Y) && !ellipse(22063.219864, 28702.459137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26931.506840, 27700.770800, 425.183212, 393.176811, 349.465200, X, Y) && !ellipse(27791.966774, 27548.560600, 516.912815, 516.912815, 0.000000, X, Y) && !ellipse(20801.371400, 25488.936400, 427.189612, 352.216010, 97.949470, X, Y) && !ellipse(25787.311310, 25119.029816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26563.748400, 24367.307000, 387.761611, 357.678410, 10.441200, X, Y) && !ellipse(20016.713989, 23451.169617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28384.485480, 23236.559800, 370.251211, 370.251211, 0.000000, X, Y) && !ellipse(17428.979065, 22497.039703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24621.314980, 40597.128800, 474.073614, 474.073614, 0.000000, X, Y) && !ellipse(22133.416620, 38228.141600, 585.273617, 585.273617, 0.000000, X, Y) && !ellipse(19866.828293, 36738.444275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28421.989807, 35820.531616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24911.450966, 35003.499565, 458.786756, 351.168949, 359.997672, X, Y) && !ellipse(24719.100098, 33598.763275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22411.192600, 33253.354000, 932.344027, 932.344027, 0.000000, X, Y) && !ellipse(17426.986000, 33972.812000, 1757.704051, 1757.704051, 0.000000, X, Y) && !ellipse(24796.791565, 32429.889282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27521.751678, 31598.421722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20179.609329, 31583.577454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21174.046570, 31121.982025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25517.140320, 30895.483600, 358.713610, 358.713610, 0.000000, X, Y) && !ellipse(20773.771698, 30496.467743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18063.540359, 28819.880463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23290.030579, 27925.358612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21769.436890, 27910.726746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23439.070648, 27526.960846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28949.977400, 27420.892400, 403.840812, 403.840812, 0.000000, X, Y) && !ellipse(20554.335660, 27404.587400, 373.140811, 373.140811, 0.000000, X, Y) && !ellipse(27395.392400, 26362.489600, 400.776812, 400.776812, 0.000000, X, Y) && !ellipse(20713.405400, 24539.156600, 312.248009, 312.248009, 0.000000, X, Y) && !ellipse(32209.112976, 24640.609467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31217.884338, 24580.101349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28916.941100, 24570.122600, 420.192012, 420.192012, 0.000000, X, Y) && !ellipse(20591.523600, 24526.600000, 624.496018, 624.496018, 0.000000, X, Y) && !ellipse(27507.698200, 24307.258400, 449.986413, 449.986413, 0.000000, X, Y) && !ellipse(26965.131000, 23057.823000, 403.164812, 403.164812, 0.000000, X, Y) && !ellipse(23884.842102, 23014.765106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26169.054077, 38234.553284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29935.422882, 37170.390991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22077.595520, 36312.354553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25199.936523, 35682.916138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22124.706360, 35959.647186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22272.065796, 33774.157166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21510.552200, 33504.128800, 452.577613, 452.577613, 0.000000, X, Y) && !ellipse(25929.821800, 31810.920400, 322.124009, 322.124009, 0.000000, X, Y) && !ellipse(16884.893204, 31966.910583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25649.130310, 31343.812378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27187.717133, 31074.297699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32424.956238, 30384.221069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25804.393768, 30326.455597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25063.988403, 30072.871094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19274.764725, 30073.991516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17132.875595, 29850.804443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20325.620010, 29874.747498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22576.101166, 29627.683746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24983.716248, 29445.750519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23308.812256, 29195.346741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26439.861755, 28147.977509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22580.107605, 27902.878479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20641.378662, 27800.712952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24180.599091, 27673.584839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21218.070938, 27770.557129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30893.548615, 26740.387177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28541.861725, 26319.602203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24183.315186, 25263.561646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29759.614807, 24961.623749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22936.316956, 24926.290619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21135.711929, 24066.246979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15922.429153, 23504.673767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14984.806885, 23270.948883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22205.306412, 22033.834000, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 22:12:42 2013] Writing fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src6.gif
[Sun Jun  9 22:12:48 2013] ../../xmm0011420101/products/events/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src6_src.evt and ../../xmm0011420101/products/events/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src6_bgd.evt exist, delete to re-create
[Sun Jun  9 22:12:48 2013] Mean detx,y = (-4138.61, -3946.65) 
[Sun Jun  9 22:12:48 2013] ../../xmm0011420101/products/images/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src6_src.img and ../../xmm0011420101/products/images/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src6_bgd.img exist, delete to re-create
[Sun Jun  9 22:12:48 2013] ../../xmm0011420101/products/spectra/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src6_src_b10.pi.gz and ../../xmm0011420101/products/spectra/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src6_bgd.pi exist, delete to re-create
[Sun Jun  9 22:12:49 2013] Setting source spectrum file to fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jun  9 22:12:49 2013] Setting bgd. spectrum file to fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Jun  9 22:12:49 2013] ../../xmm0011420101/products/lightcurves/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src6_src.lc and ../../xmm0011420101/products/lightcurves/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src6_bgd.lc exist, delete to re-create
[Sun Jun  9 23:27:15 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun  9 23:27:15 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:18:34 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:18:34 2013] Total counts from fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 36588.00
[Mon Jun 10 07:18:34 2013] Total counts from fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src6_bgd.pi.gz = 20363.00
[Mon Jun 10 07:18:34 2013] Got source and background scale factors 4312616.000000, 96338906.000000
[Mon Jun 10 07:18:34 2013] User source parameters:
  Position = (265.6, 362.8) = 6 40 56.36 9 54 10.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 35676.4 +/- 192.3
  Background aperture counts = 911.6
  Rate = 1 +/- 0.005

[Mon Jun 10 07:18:34 2013] Updating counts from extracted products
[Mon Jun 10 07:18:34 2013] Set source signif. to 35676.45/30.19 = 1181.66
[Mon Jun 10 07:19:06 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:19:06 2013] Using photon index=1.80, rate=1.01, arf fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src6.arf
[Mon Jun 10 07:19:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:19:06 2013] Updating source flux to 6.3e-12
[Mon Jun 10 07:20:47 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 07:21:23 2013] xmm0011420101/analysis//spectral/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete